Professional Documents
Culture Documents
1
IDENTIFY THE FOLLOWING TERMINOLOGIES AND PUT ILLUSTRATION ON
EACH.
The maximum length of a vessel from the two points on the hull
measured perpendicular to the waterline.
B. BASELINE
C. MOULDED DEPTH
D. EXTREME DEPTH
Depth of vessel at ship's side from upper deck to lowest point of keel .
E. MOULDED BEAM
Moulded Beam or Breadth (B) : The distance from the inside of plating
on one side to a similar point on the other side measured at the
broadest part of the ship.
F. EXTREME BEAM
is the maximum breadth, in feet, of the ship at or below the main deck
to the outside of the hull over blister plating, guards, or armor.
G. MOULDED DRAUGHT
is the vertical distance between the top of the keel to the designed
summer load line, usually measured in the midships plane
H. EXTREME DROUGHT