Professional Documents
Culture Documents
January 2013
1
Indicates no connection to bluetooth
Tick arrow right to go forwards From this flashing symbol pops up – You have 10 seconds to make the drop - Otherwise your
connection will be lost – and you have to wait for another 20 seconds before you have
connectivity again.
3
Tick Force and it will make changes from kN to kPa
GPS data appears typical after 3-5 minutes / reaching the satellites.
GPS data are stored only when making a new point So make sure that you have GPS connection –
before starting in actual Point.
We suggest you using the GO button and not the Auto Drop .
Auto Drop is best for homogenous material and for `professional user´s ` ☺
4
When ended all measurements use arrow backwards – and use TXT to make file ready for Excel Import created.fw2 file from PDA to LapTop and use your
spreadsheet – FW2 file
Spreadsheet : Prima100 for 1 geophone Uk Development v5dev not for issue.xls
to further import
5
Now You can close down – using OK
Press left button for 2-3 seconds for closing down Prima program
6
The following pages 7 – 9
7
Information : Port number shall be the same as Incoming Port in Bluetooth settings
8
Information : Don’t touch – but be aware that you have chosen the same port number in FWD
settings under tools menu in the data collection software.