Professional Documents
Culture Documents
VII. ILLUSTRATION/SET-UP
Bulk Density
1. Prepare the clean sample of grain 2. Using hopper fill the cylinder with a zigzag motion
3. once it overflows, level it using a straight material 4. weigh the sample then subtract the weight of the
Beeker
-L
Republic of the Philippines
CAMARINES NORTE STATE COLLEGE
F. Pimentel Avenue, Brgy. 2, Daet, Camarines Norte – 4600, Philippines
Angle of Friction
1. Place the grain sample on the board and gently lift the
other end of the board.
2. Once all the sample slides down measure the angle of friction
-L
Republic of the Philippines
CAMARINES NORTE STATE COLLEGE
F. Pimentel Avenue, Brgy. 2, Daet, Camarines Norte – 4600, Philippines
Angle of Repose
1. fill the hopper with 500gm of grain sample 2. Release the grains on the table
1. Prepare 5 grains per trial 2. Using micrometer caliper measure the length, width
and thickness