Professional Documents
Culture Documents
www.smt.sandvik.com
Standard Forms of Supply:
Other forms available upon request
Bare Wire:
Spools – 2, 10, 33, 600 lbs. (.023-.093 inch diameter)
Drums – 300, 600 lbs. (.035, .039 and .045 inch diameter)
Coils – 60 lb. coils (.063-.187 inch diameter)
Cut Lengths – 36 inch length (.035-.187 inch diameter) (10 lb. unit, 30 lb. case,
1 lb. unit, 15 lb. case, 3 lb. unit, 45 lb. case)
(Stamping with grade and heat # both ends)
Covered Electrodes – 3/32 x 12 inch (7 lb. unit, 21 lb. case)
1/8 x 14 inch (9 lb. unit, 27 lb. case)
5/32, 3/16 x 14 inch (10 lb. unit, 30 lb. case)
Flux Cored Electrodes – 33 lb. Wire Basket Spools (.035-.063 inch diameter)
Strip Electrodes – 60 lb. (30, 60 and 90 x .5mm)
Large Coils available upon request
Welding Fluxes – 55 lb. sealed pails
STAINLESS1) 3)
308/308L ER308/308L MIL-308L S30883 CWB .01 20 10 - 1.8 .4 -
308Si/308LSi ER308Si/308LSi S30888 TüV,CWB .01 20 10.5 - 1.8 .8 -
308/308H ER308/308H MIL-308 S30880 .05 20 9.5 - 1.8 .4 -
347 ER347 MIL-347 S34780 TüV,CWB .04 19.5 9.5 - 1.3 .4 Nb=.5
316/316L ER316/316L MIL-316L S31683 TüV,CWB .01 18.5 12.5 2.6 1.8 .4 -
316Si/316LSi ER316Si/316LSi S31688 TüV,CWB .01 18.5 12 2.6 1.8 .8 -
316/316H ER316/316H MIL-316 S31680 .05 19.5 11.5 2.2 1.8 .4 -
317/317L ER317/317L MIL-317 S31783 CWB .01 19 13.5 3.6 1.8 .4 -
309/309L ER309/309L S30983 CWB .01 23.5 13.5 - 2.2 .4 -
309 ER309 MIL-309 S30980 .06 23.5 13 - 1.8 .4 -
309Si/309LSi ER309Si/309LSi S30988 CWB .01 23.5 13.5 - 1.8 .8 -
310 ER310 MIL-310 S31080 .10 26 21 - 1.8 .5 -
312 ER312 MIL-312 S31380 .11 30 9 - 1.8 .4 -
409Cb 5)
ER409Nb S40940 .02 11 - - .6 .6 Nb=.4
430 ER430 S43080 .03 17 - - .3 .2 -
430LCb .02 18.5 - - .5 .7 Nb=.5
NICKEL BASE2)
NiCr-3 ERNiCr-3 MIL-EN/RN82 N06082 .02 20 72.5 - 3 .2 Ti=.4
Fe=1.5
Nb=2.5
NiCrMo-3 ERNiCrMo-3 MIL-EN/RN625 N06625 .02 22 63 9 .2 .2 Ti=.2
Fe=0.5
Nb=3.5
San 68HP NiCrFe-7 ≤0.030 29 >58 - .5 .2 Fe=10
1)
Stainless wire: ASME SFA5.9;AWS A5.9; MIL-E 19933 4)
LDX 2101® is a trademark owned by Outokumpu Stainless.
2)
Nickel base: ASME SFA5.14; AWS A5.14; MIL-E 21562 5)
Nb and Cb are the same element.
3)
Standard products conform to AWS, SFA and CWB.
Other approvals upon request.
Covered Electrodes
Chemical Composition for All-Weld Metal (Typical), %
AC/DC AC/DC ASME Other Other
Sandvik -16 -17 AWS UNS # Approvals Covering C Cr Ni Mo Mn Si Cu Elements
STAINLESS6)
308/308L • • E308/308L W30813 CWB -16 .03 20 10 - 1.6 .4 - -
NICKEL BASE7)
NiCrFe-3 ENiCrFe-3 W86182 .03 16.5 70 - 6.5 .5 - Fe=6
Fe=10
6)
Stainless wire: ASME SFA5.4;AWS A5.4:MIL-E-22200
7)
Nickel base: ASME SFA5.11;AWS A5.11;MIL-E-22200
STAINLESS8)
308LT0-1/T0-4 E308LT0-1/T0-4 W30835 CWB .03 20.5 10.5 - 1.5 .5
Strip Electrodes
Chemical Composition (Typical), %
ASME Other
Sandvik AWS C Cr Ni Mo Nb(Cb) Mn Si Cu Elements
STAINLESS9)
308L EQ308L .01 20 10.5 - - 1.8 .4 - -
Welding Fluxes
Sandvik To be used in combination with Sandvik Strip/Wire
Welding Flux Electrode Type ABBREVIATIONS AND NOTES
AWS = American Welding CWB = Canadian Welding
OVERLAY WELDING Society Bureau
34SF 300 and 400 series stainless ASME = American Society TüV = Technischer
NiCr-3SF Nickel base for chromium-containing overlays of Mechanical Engineers überwachungs-Verein
with, or without molybdenum MIL = Military HF = High Ferrite
37S 300 and 400 series stainless using electroslag UNS = Unified Numbering
welding System
47S 300 and 400 series stainless using electroslag
welding FURTHER INFORMATION
JOINT WELDING Sandvik Stainless Welding Consumables are described in detail,
visit www.smt.sandvik.com
34WF 300 and 400 series stainless
35WF 300 and 400 series stainless, duplex and
cryogenic applications
NiCr-3WF Nickel base for chromium-containing weld metal with,
or without molybdenum
Features of Sandvik Welding Products
Sandvik, as a fully integrated manufacturer of welding products, offers:
• Chemical compositions optimized for each welding process
• Controlled ferrite content for resistance to microfissuring
• Balanced content of microelements for optimum arc stability and wetting characteristics
• Welding products for mechanized welding with controlled surface and balanced form,
and mechanical properties for trouble-free welding
• Wide choice of filler metals for joint and overlay welding of all important standard specialty steels
Contact Information
MAIN OFFICE - SCRANTON, PA, USA
Address:
982 Griffin Pond Road
Clarks Summit, PA 18411
Warehouses:
Scranton, PA
Houston, TX
Reno, NV
Technical Service
Welding Hotline - 800-781-9449
Quality Assurance
Quality Assurance Engineer - 888-852-9442 Ext. 7547
www.smt.sandvik.com
S2330-US SASV0650311
MARCH 2011 PRINTED IN USA