You are on page 1of 1

8. The below mentioned details are required to be included in the drawing.

A sample drawing is
attached for reference.

▪ Limited obstacles Sector marking.


▪ Obstacles Free Sector.
▪ Imaginary D circle.

TC 9 Draw ing _For


refernces_30032023.pdf
9. It was not noticed that few details around the Helideck like extinguisher ramp (photo attached
below), forward emergency access point., etc, were missing. Please include those also on the
drawings.

10. The elevation view of helideck with the information of the 5:1 180 ̊ Falling gradient is required.
An example from a different installation is shown below.

Note: The Documents used for review is CAP 437 Edition 9.

-End-

You might also like