Professional Documents
Culture Documents
CPAS-3000 V2.7 Operator Guide 5230810629 PDF
CPAS-3000 V2.7 Operator Guide 5230810629 PDF
guide
CPAS-3000 V2.7
Data Loader
Rockwell Collins
Customer Response Center
400 Collins Rd NE M/S 133-100
Cedar Rapids, IA 52498-0001
TELEPHONE: 1.888.265.5467
INTERNATIONAL: 1.319.265.5467
FAX NO: 1.319.295.4941
EMAIL: response@rockwellcollins.com
TABLE OF CONTENTS
Tab Title Page
1 INTRODUCTION
List of Acronyms and Abbreviations .................................... 1- 1
2 OVERVIEW
Introduction .......................................................................... 2- 1
3 SYSTEM REQUIREMENTS
Introduction .......................................................................... 3- 1
Items Needed to Install/Use the CPAS-3000 ....................... 3- 2
4 SETUP
Introduction .......................................................................... 4- 1
Installing the CPAS-3000 Data Loader ................................ 4- 1
Uninstalling the CPAS-3000 Data Loader ............................ 4- 2
7 QUICK START
Introduction .......................................................................... 7- 1
Uploading Data/Software to an LRU ................................... 7- 1
Downloading Data/Software from an LRU ........................... 7- 3
Importing Data/Software ...................................................... 7- 4
8 PROGRAM LIMITATIONS
CPAS-3000 Data Loader Limitations ................................... 8- 1
9 PROGRAM OPERATION
Introduction .......................................................................... 9- 1
CPAS-3000 Launch Pad Window ........................................ 9- 1
Network Connections Detected Window ............................. 9- 2
Starting CPAS-3000 Window ............................................... 9- 4
Exiting CPAS-3000 Window ................................................ 9- 5
Quick Start Checklist Window ............................................. 9- 6
2nd Edition
6 Jun 08 i
OPERATOR’S GUIDE CPAS-3000 Data Loader
Table of Contents Data Loading Software For Windows
10 TROUBLESHOOTING
Introduction ........................................................................ 10- 1
CPAS-3000 Data Loader Installation Fails ........................ 10- 1
Insufficient Hard Drive Memory ...................................... 10- 1
Unable to Register the COM Objects ............................. 10- 1
No Targets Available to Update ......................................... 10- 1
Target/LRU Missing From the Update List ......................... 10- 2
Installed Data/Software Not Shown .................................. 10- 3
Unable to Import a Data/Software Item ............................. 10- 3
Data/Software Not Shown ............................................. 10- 4
Error Occurred During the Import .................................. 10- 4
Data/Software Fails an Integrity Check .......................... 10- 5
Dataload Failure Encountered ........................................... 10- 5
File Missing .................................................................... 10- 5
Timeout/Counter Error ................................................... 10- 6
2nd Edition
ii 6 Jun 08
CPAS-3000 Data Loader OPERATOR’S GUIDE
Data Loading Software For Windows Table of Contents
2nd Edition
6 Jun 08 iii
OPERATOR’S GUIDE CPAS-3000 Data Loader
Data Loading Software For Windows
2nd Edition
iv 6 Jun 08
CPAS-3000 Data Loader OPERATOR’S GUIDE
Data Loading Software For Windows List of Illustrations
LIST OF ILLUSTRATIONS
Figure Title Page
2nd Edition
6 Jun 08 v
OPERATOR’S GUIDE CPAS-3000 Data Loader
List of Illustrations Data Loading Software For Windows
2nd Edition
vi 6 Jun 08
CPAS-3000 Data Loader INTRODUCTION
Data Loading Software For Windows List of Acronyms and Abbreviations
INTRODUCTION
This operator’s guide applies to Rockwell Collins CPAS-3000 Data
Loader, Version 2.7. The guide will be revised as other functions
become available in the future.
The software installation procedures located in the Setup topic of this
guide are a one-time install procedure. Once installed, the Data Loader
program remains on the Personal Computer’s (PC) hard drive until the
user removes it via the uninstall procedure.
2nd Edition
6 Jun 08 1-1
INTRODUCTION CPAS-3000 Data Loader
List of Acronyms and Abbreviations Data Loading Software For Windows
2nd Edition
1-2 6 Jun 08
CPAS-3000 Data Loader OVERVIEW
Data Loading Software For Windows Introduction
OVERVIEW
INTRODUCTION
The Collins Portable Access Software (CPAS) Data Loader is a
software application that provides external media upload and download
capabilities to Ethernet based Line Replaceable Units (LRU), like
Rockwell Collins’ File Server Unit (FSU). The FSU provides the added
capability to allow uploads and downloads to other LRUs, like the Flight
Management Computer (FMC) and Maintenance Diagnostic Computer
(MDC), which are attached to the FSU. The CPAS Data Loader is
designed for use on a standard Windows-based PC with Ethernet
capability.
Overview of File Server Unit (FSU)
The FSU is part of Rockwell Collins’ Pro Line 21 Continuum architecture
that provides an advanced, highly integrated cockpit environment.
The FSU provides the storage and processing platform for advanced
features, like electronic airport and procedure charts, up-linked
graphical weather and enhanced map overlays.
The FSU provides data load connectivity to other Rockwell Collins’ Pro
Line 21 and Pro Line 4 LRUs, like the FMC, the MDC and Aeronautical
Radio, Inc (ARINC) 429 based LRUs. These LRUs are loaded over
the same Ethernet connection that is used to load the FSU. Thus, the
CPAS-3000 supports loading of all (aircraft loadable) LRUs using the
same user interface and a single Ethernet connection, while relieving
the operator of having to understand what data load type corresponds
to what LRU.
Overview of Data Load Types
The CPAS-3000 automatically manages the type of data loads and
only provides a list of data and software loads that are appropriate for
the selected target or LRU. This alleviates the operator from having to
understand and manage the different data load types. The following
paragraphs provide an overview of the various data load types that
CPAS supports.
The CPAS supports ARINC 615A loads for Ethernet based LRUs,
like the FSU. ARINC 615A loads must be formatted per ARINC 665
standards. The CPAS does not support ARINC 615A download
capabilities.
2nd Edition
6 Jun 08 2-1
OVERVIEW CPAS-3000 Data Loader
Introduction Data Loading Software For Windows
When connected to the FSU, the CPAS also supports ARINC 615-3
loads for ARINC 429 based LRUs and Rockwell Collins proprietary
RS-422 DBU (Data Base Unit) based loads to the FMC and MDC. The
CPAS does not support ARINC 615-3 download capabilities.
The CPAS supports two types of RS-422 DBU based loads, normal
DBU mode and enhanced DBU mode. Normal DBU mode functions
similar to a normal DBU – once the data load has been started on the
CPAS, the operator must then initiate the actual upload or download
operation through the appropriate FMC or MDC interface. In enhanced
DBU mode, the CPAS can initiate the actual upload or download,
thereby bypassing any required interaction through the FMC or MDC
interface. If a FMC or MDC does not support enhanced DBU mode,
CPAS will revert back to normal DBU mode, which is supported by all
FMCs and MDCs. CPAS will prompt the operator (through a message
in the status window) when FMC or MDC interaction is necessary.
On some aircraft that contain an Avionics System Local Area Network
(LAN), the CPAS also supports ARINC 615-3 loads for ARINC 429
based LRUs over the Avionics System LAN. On these aircraft, the
ARINC 429 based LRUs are connected to a data load switch attached
to an Input/Output Concentrator (IOC) that is connected to the Avionics
System LAN.
2nd Edition
2-2 6 Jun 08
CPAS-3000 Data Loader SYSTEM REQUIREMENTS
Data Loading Software For Windows Introduction
SYSTEM REQUIREMENTS
INTRODUCTION
The Rockwell Collins CPAS-3000 Data Loader is designed to run on a
system with the following minimum requirements:
DESCRIPTION REQUIREMENT
PC or Laptop A PC with at least a 1 GHz 32-bit (x86)
Computer processor (or equivalent), 512 Mbyte RAM and
20 Gbyte hard drive. The PC must be running
the Windows 2000, Windows XP, or Windows
Vista operating system.
NOTE
N
CPAS-3000 will NOT run on Windows
95, Windows 98, Windows ME, or
Windows NT.
The PC must have Ethernet capability, which
may be built into the PC or may be an installed
Customer Off The Shelf (COTS) Ethernet
Personal Computer Memory Card Interface
Association (PCMCIA) card. The Ethernet
hardware must support 100 Base T.
NOTE
N
Installation of the CPAS-3000 requires
administrator rights.
NOTE
N
It is recommended that the CPAS-3000
users have administrator rights (or
at least rights to modify the network
parameters and enable/disable the
network adapter). Otherwise the PC will
require a reboot at startup and exit of the
CPAS-3000 Data Loader program.
2nd Edition
6 Jun 08 3-1
SYSTEM REQUIREMENTS CPAS-3000 Data Loader
Items Needed to Install/Use the CPAS-3000 Data
Loading Software For Windows
QUANTITY DESCRIPTION
1 CPAS-3000 Data Loader Software
Package (CPN 810-0032-004),
which includes the following items:
•Install CD contains the Rockwell
Collins CPAS-3000 Launch Pad
and Data Loader software V2.7.
•CPAS-3000 Data Loader operator’s
guide.
1 Ethernet cable with RJ-45 connectors:
•Refer to the aircraft manual to determine
proper cable type (i.e., Standard or crossover
cable) to be used.
2nd Edition
3-2 6 Jun 08
CPAS-3000 Data Loader SYSTEM REQUIREMENTS
Data Loading Software For Windows Items
Needed to Install/Use the CPAS-3000
CAUTION
C
If using an Ethernet switch to connect the CPAS-3000 to multiple
Ethernet based LRU’s (like the FSU), the ports on the switch must
be configured for 100 Base T and full duplex mode before the Data
Loader application will function properly. Refer to the Ethernet
switch documentation for further information on configuring the
switch.
2nd Edition
6 Jun 08 3-3
SYSTEM REQUIREMENTS CPAS-3000 Data Loader
Data Loading Software For Windows
2nd Edition
3-4 6 Jun 08
CPAS-3000 Data Loader SETUP
Data Loading Software For Windows Introduction
SETUP
INTRODUCTION
The following paragraphs provide the procedures to install the Rockwell
Collins CPAS-3000 Data Loader onto the PC and to uninstall the Data
Loader from the PC.
2nd Edition
6 Jun 08 4-1
SETUP CPAS-3000 Data Loader
Uninstalling the CPAS-3000 Data Loader Data Loading Software For Windows
2nd Edition
4-2 6 Jun 08
CPAS-3000 Data Loader UNLOCKING THE SOFTWARE
Data Loading Software For Windows Unlock Software Window
You must provide the software serial number and system id to Rockwell
Collins Technical Support in order to receive your software unlock key.
The software serial number and system id will be displayed in the fields
as shown above. If the software serial number field is blank, enter the
Software Serial Number from your CPAS-3000 software CD.
2nd Edition
6 Jun 08 5-1
UNLOCKING THE SOFTWARE CPAS-3000 Data Loader
Unlock Software Window Data Loading Software For Windows
After receiving your software unlock key from Rockwell Collins Technical
Support, enter the key in the field and click UNLOCK. If the software
determines the key is valid, it will launch the Data Loader application.
If you do not have a software unlock key, you can click the EXIT button
to exit the application.
2nd Edition
5-2 6 Jun 08
CPAS-3000 Data Loader SELECTING PC NETWORK ADAPTER
Data Loading Software For Windows Introduction
INTRODUCTION
For the Data Loader to properly communicate with the FSU or other
Ethernet based LRUs, the Internet Protocol (IP) address, subnet
mask, MTU size, connection speed, and duplex mode of the Ethernet
network connection must be properly configured. The Data Loader will
automatically configure the network adapter on application startup and
restore the network adapter to its original configuration upon application
exit.
In order to provide this capability, the installation program attempts
to automatically select the Local Area Connection network adapter
and determine the appropriate configuration settings during software
installation. If a Local Area Connection is not detected, the installation
program selects the first available network adapter, excluding Wireless
and 1394 (FireWire) network connections. If multiple Local Area
Connection entries are detected, the user will be prompted to manually
select the PC network adapter and appropriate configuration settings
that will be used by the Data Loader.
NOTE
N
The selected network adapter can be viewed and changed from the
Network tab of the Data Loader advanced configuration settings.
Refer to the Network Tab under the Advanced section of the Data
Loader Configuration Window topic for information on viewing and
changing the network parameters.
2nd Edition
6 Jun 08 6-1
SELECTING PC NETWORK ADAPTER CPAS-3000 Data Loader
Configure Dataload Network Adapter Settings Window Data
Loading Software For Windows
2nd Edition
6-2 6 Jun 08
CPAS-3000 Data Loader SELECTING PC NETWORK ADAPTER
Data Loading Software For Windows Configure
Dataload Network Adapter Settings Window
2nd Edition
6 Jun 08 6-3
SELECTING PC NETWORK ADAPTER CPAS-3000 Data Loader
Data Loading Software For Windows
2nd Edition
6-4 6 Jun 08
CPAS-3000 Data Loader QUICK START
Data Loading Software For Windows Introduction
QUICK START
INTRODUCTION
The procedures that follow outline the basics on uploading,
downloading, and importing data/software. All procedures assume that
the PC is running and that the CPAS-3000 Data Loader application has
been successfully installed. For additional information on these topics,
please refer to the applicable sections later in this Operator’s Guide.
NOTE
N
Multiple target LRUs can be loaded simultaneously by starting
multiple uploads or downloads using the following instructions. A
separate status tab will be created for each load.
NOTE
N
If the user does not have sufficient privileges to modify the
network parameters and enable/disable the network adapter (e.g.,
administrator rights), then the PC will require a reboot at startup and
exit of the CPAS-3000 Data Loader Program.
2nd Edition
6 Jun 08 7-1
QUICK START CPAS-3000 Data Loader
Uploading Data/Software to an LRU Data Loading Software For Windows
CAUTION
C
Disable any internet security software for example, firewalls
and Virtual Private Network (VPN) software, before starting the
CPAS-3000. These programs can block the network traffic needed
to communicate with the LRUs. The firewall and VPN programs
should be re-enabled before the PC is connected to internet service
or office network.
2nd Edition
7-2 6 Jun 08
CPAS-3000 Data Loader QUICK START
Data Loading Software For Windows Downloading Data/Software from an LRU
Click the CLOSE STATUS button to close the status tab for the
completed load. Select FILE and then EXIT from the menu bar, or click
the EXIT CPAS button to exit the CPAS-3000 Data Loader.
2nd Edition
6 Jun 08 7-3
QUICK START CPAS-3000 Data Loader
Importing Data/Software Data Loading Software For Windows
Click the CLOSE STATUS button to close the status tab for the
completed load. Select FILE and then EXIT from the menu bar or click
the EXIT CPAS button to exit the CPAS-3000 Data Loader.
IMPORTING DATA/SOFTWARE
NOTE
N
The CPAS does not need to be connected to the FSU or other
Ethernet capable LRUs in order to import data/software.
2nd Edition
7-4 6 Jun 08
CPAS-3000 Data Loader QUICK START
Data Loading Software For Windows Importing Data/Software
2nd Edition
6 Jun 08 7-5
QUICK START CPAS-3000 Data Loader
Data Loading Software For Windows
2nd Edition
7-6 6 Jun 08
CPAS-3000 Data Loader PROGRAM LIMITATIONS
Data Loading Software For Windows CPAS-3000 Data Loader Limitations
PROGRAM LIMITATIONS
2nd Edition
6 Jun 08 8-1
PROGRAM LIMITATIONS CPAS-3000 Data Loader
Data Loading Software For Windows
2nd Edition
8-2 6 Jun 08
CPAS-3000 Data Loader PROGRAM OPERATION
Data Loading Software For Windows Introduction
PROGRAM OPERATION
INTRODUCTION
The CPAS-3000 Data Loader supports the following functions:
• Uploading data/software to the target LRU.
• Downloading data/software from the target LRU.
• Importing data/software into the PC.
• Removing data/software from the PC.
• Checking the integrity of data/software.
• Requesting 615A target information.
• Querying which targets are available for data loading (i.e.,
acquire/refresh targets).
NOTE
N
Multiple targets/LRUs can be loaded simultaneously by starting
multiple uploads or downloads using the instructions listed in the
Quick Start Section.
2nd Edition
6 Jun 08 9-1
PROGRAM OPERATION CPAS-3000 Data Loader
Network Connections Detected Window Data Loading Software For Windows
2nd Edition
9-2 6 Jun 08
CPAS-3000 Data Loader PROGRAM OPERATION
Data Loading Software For Windows Network Connections Detected Window
2nd Edition
6 Jun 08 9-3
PROGRAM OPERATION CPAS-3000 Data Loader
Starting CPAS-3000 Window Data Loading Software For Windows
If the network parameters are different than those required by the Data
Loader, then the original network parameters will be saved, the network
parameters will be updated to the appropriate values and the network
adapter will be reset. If the user does not have sufficient rights to update
the network adapter and enable/disable the network adapter, the user
will be prompted (Figure 9-4) to reboot the PC and restart CPAS-3000
before the Data Loader will function properly. Refer to the Network Tab
under the Advanced section of the Data Loader Configuration Window
topic for information on the network parameters.
2nd Edition
9-4 6 Jun 08
CPAS-3000 Data Loader PROGRAM OPERATION
Data Loading Software For Windows Exiting CPAS-3000 Window
If the user does not have sufficient rights to update the network adapter
and enable/disable the network adapter, the user will be prompted
(Figure 9-7) to reboot the PC before the PC will function properly. Refer
to the Network Tab under the Advanced section of the Data Loader
Configuration Window topic for information on the network parameters.
2nd Edition
6 Jun 08 9-5
PROGRAM OPERATION CPAS-3000 Data Loader
Quick Start Checklist Window Data Loading Software For Windows
2nd Edition
9-6 6 Jun 08
CPAS-3000 Data Loader PROGRAM OPERATION
Data Loading Software For Windows Quick Start Checklist Window
The current step displayed indicates the next action that should be
performed by the user to start a load. When the action is performed in
the CPAS-3000 Data Loader window, the current step will automatically
become checked and the next step will be displayed. For instance,
when Step 3 is shown as the current step (as shown above), selecting
a target from the Select Target/LRU to be Updated drop-down box will
cause Step 3 to become checked and advance to Step 4 as the current
step. The current step in the list can also be manually checked off by
clicking on the box next to the step.
2nd Edition
6 Jun 08 9-7
PROGRAM OPERATION CPAS-3000 Data Loader
CPAS-3000 Data Loader Window Data Loading Software For Windows
Once the last step, Step 5, has been completed by starting a load,
Steps 3 – 5 will automatically become unchecked and Step 3 will be
displayed as the current step. This indicates the user can start another
load by selecting another target and continuing down the checklist.
Click the CLOSE button to close the Quick Start Checklist window. If
the DO NOT SHOW THIS AGAIN BOX is checked, the window will no
longer be displayed on application startup. By default, this box is not
checked.
Displaying the Quick Start Checklist window on startup can also be
enabled or disabled by selecting Help Show Quick Start Checklist on
Startup from the main CPAS-3000 Data Loader menu bar. This menu
item can either be checked or not checked, and selecting the menu
item will toggle its checked status. When checked, the Quick Start
Checklist window will be displayed on application startup. This menu
item is checked by default.
2nd Edition
9-8 6 Jun 08
CPAS-3000 Data Loader PROGRAM OPERATION
Data Loading Software For Windows CPAS-3000 Data Loader Window
LOAD DIRECTION
The pressed button indicates the current load direction (Figure 9-10).
To change the load direction, simply click on the button of the desired
direction. Upload will transfer data/software from the CPAS to the
selected target/LRU. Download will transfer data/software from the
selected target/LRU to the CPAS. UPLOAD is selected by default.
2nd Edition
6 Jun 08 9-9
PROGRAM OPERATION CPAS-3000 Data Loader
CPAS-3000 Data Loader Window Data Loading Software For Windows
ACQUIRE/REFRESH TARGETS
Click on the ACQUIRE/REFRESH TARGETS button to refresh the
SELECT TARGET/LRU TO BE UPDATED list (Figure 1-11). A query
command (as defined by ARINC 615A) is sent to all data load targets
attached to the Ethernet network, and the targets that reply to this query
are added to the list.
2nd Edition
9-10 6 Jun 08
CPAS-3000 Data Loader PROGRAM OPERATION
Data Loading Software For Windows CPAS-3000 Data Loader Window
The target’s type name is displayed in the left column of the list item.
In the example above, the selected target’s type name is FSU. The
target’s position is displayed in the right column of the list item. In Figure
9-12, L28 is the selected target’s position. For Ethernet-based LRUs,
the target’s hardware ID is listed in parenthesis following the position. In
this example above, Col_FSU is the selected target’s hardware ID.
NOTE
N
The targets displayed in the drop-down box are filtered based on
the selected load direction. For instance, if the Download button
is selected, only targets supporting downloads will be displayed,
which are currently only the FMCs and MDC.
2nd Edition
6 Jun 08 9-11
PROGRAM OPERATION CPAS-3000 Data Loader
CPAS-3000 Data Loader Window Data Loading Software For Windows
2nd Edition
9-12 6 Jun 08
CPAS-3000 Data Loader PROGRAM OPERATION
Data Loading Software For Windows CPAS-3000 Data Loader Window
LOAD FROM
The LOAD FROM area above the SELECT DRIVE/SOFTWARE TO BE
UPDATED displays the drive where data/software items in the SELECT
DRIVE/SOFTWARE TO BE UPDATED list is stored. This area is for
display purposes only.To change the drive from which data/software
items will be loaded, select VIEW and then SELECT DRIVE from the
menu bar. The SELECT DRIVE pop-up window will be displayed with
the hard drive and any available CD, DVD, and removable drives on the
PC. Select a drive from the list and click the OK button.
When a new drive is selected using the SELECT DRIVE pop-up, the
LOAD FROM area is updated with the icon and drive letter of the new
selection. The SELECT DATA/SOFTWARE TO BE UPDATED list is
updated with the data/software items found on the selected drive.
BEGIN LOAD
After selecting a target from the SELECT TARGET/LRU TO BE
UPDATED drop-down box and a data/software item from the SELECT
DATA/SOFTWARE TO BE UPDATED drop-down box, click the BEGIN
LOAD button (Figure 9-15) to begin the load.
After clicking on the BEGIN LOAD button, a tab displaying the status
of the load will appear in the STATUS area. If any other load tabs are
displayed in the STATUS area, the newly added tab will be displayed on
top of the other tabs.
2nd Edition
6 Jun 08 9-13
PROGRAM OPERATION CPAS-3000 Data Loader
CPAS-3000 Data Loader Window Data Loading Software For Windows
The BEGIN LOAD button remains grayed (disabled) until a target and a
data/software item have been selected (Figure 9-16).
STATUS TABS
A status tab (Figure 9-17) is created for each load that is started by
clicking on the BEGIN LOAD button. Each load status tab in the
STATUS area contains the selected target’s type name and position,
the selected data/software item’s part number or name, the overall
percentage of the load completed, and an icon indicating the current
state of the load process.
The three load state icons are:
2nd Edition
9-14 6 Jun 08
CPAS-3000 Data Loader PROGRAM OPERATION
Data Loading Software For Windows CPAS-3000 Data Loader Window
In Figure 9-17, the icon indicates the load is currently in progress. The
target’s type name and position are FSU and L28, the data/software
item’s part number is CRC29-SL0T-0000, and the load is 88 percent
complete.
The status window contains two progress bars. The FILE progress
bar graphically indicates the percentage of the current file that is
being loaded. The name of the file currently being loaded is displayed
immediately above the FILE progress bar. In the example shown above,
the load of the current file, 7844-CRC29-SL0T-0000.017, is about
20% complete (the progress bar is roughly 20% full). The OVERALL
PROGRESS bar graphically indicates the overall percentage of the
load completed.
Status information for the load process is logged to a text file. The
status window displays these logged messages if the DISPLAY
LOGGED STATUS INFO box is checked. These messages can be
useful troubleshooting information to assist Rockwell Collins Customer
Support when the Data Loader does not operate as expected. By
default, this box is checked.
The load may be cancelled by clicking on the CANCEL UPLOAD button
(or CANCEL DOWNLOAD, if a download is in progress). If the load is
cancelled, encounters an error, or completes successfully, the button
text will change to CLOSE STATUS. Clicking on the CLOSE STATUS
button will remove the status tab for that load process.
If the CLOSE STATUS ON COMPLETION box is checked, the status
tab for the load will be closed automatically upon successful completion
of the load process. By default, the CLOSE STATUS ON COMPLETION
box is checked unless the ALWAYS CLOSE ON SUCCESSFUL LOAD
box is checked in the configured settings. Refer to the GENERAL
section of the DATA LOADER CONFIGURATION WINDOW topic
for information on the ALWAYS CLOSE ON SUCCESSFUL LOAD
setting. By default, the CLOSE STATUS ON COMPLETION box is NOT
checked unless the ALWAYS CLOSE ON SUCCESSFUL LOAD box is
not checked in the configuration settings.
If an error occurs during a load, the status tab for that load (Figure 9–18)
is displayed on top of all other tabs. The tab will not close automatically
even if the CLOSE STATUS ON COMPLETION box is checked.
2nd Edition
6 Jun 08 9-15
PROGRAM OPERATION CPAS-3000 Data Loader
CPAS-3000 Data Loader Window Data Loading Software For Windows
2nd Edition
9-16 6 Jun 08
CPAS-3000 Data Loader PROGRAM OPERATION
Data Loading Software For Windows CPAS-3000 Data Loader Window
2nd Edition
6 Jun 08 9-17
PROGRAM OPERATION CPAS-3000 Data Loader
CPAS-3000 Data Loader Window Data Loading Software For Windows
2nd Edition
9-18 6 Jun 08
CPAS-3000 Data Loader PROGRAM OPERATION
Data Loading Software For Windows CPAS-3000 Data Loader Window
2nd Edition
6 Jun 08 9-19
PROGRAM OPERATION CPAS-3000 Data Loader
CPAS-3000 Data Loader Window Data Loading Software For Windows
2nd Edition
9-20 6 Jun 08
CPAS-3000 Data Loader PROGRAM OPERATION
Data Loading Software For Windows Manage Data/Software Window
The third window (Figure 9-24) is displayed when the Data Loader
program is exited and the PRIMARY TARGET NAME (specified on
the FSU tab in the ADVANCED configuration settings) has replied to
a previous Acquire/Refresh Targets query (Figure 9-24). The window
provides an operational warning regarding when avionics power can
be removed.
2nd Edition
6 Jun 08 9-21
PROGRAM OPERATION CPAS-3000 Data Loader
Manage Data/Software Window Data Loading Software For Windows
sort order for that column. By default, the data/software items are
sorted by part number/name in ascending order.
REMOVE
The REMOVE button allows data/software to be removed from the PC
hard drive (refer to the Import section for specific loadset directory
information). The button remains grayed (disabled) until a data/software
item in the DATA/SOFTWARE INSTALLED ON CPAS list box has been
selected.
Use the following procedure to remove data/software. The procedure
assumes that the PC is running and the CPAS-3000 Data Loader
application has been successfully installed.
1. Double click on the CPAS LAUNCH PAD icon.
2nd Edition
9-22 6 Jun 08
CPAS-3000 Data Loader PROGRAM OPERATION
Data Loading Software For Windows Manage Data/Software Window
IMPORT
The IMPORT button allows data/software to be copied from floppy,
hard drive, CD-ROM, and network drives to the PC hard drive portion
managed by the Data Loader. Clicking on the IMPORT button will cause
the SELECT A DIRECTORY window (Figure 9-26) to be displayed.
2nd Edition
6 Jun 08 9-23
PROGRAM OPERATION CPAS-3000 Data Loader
Manage Data/Software Window Data Loading Software For Windows
2nd Edition
9-24 6 Jun 08
CPAS-3000 Data Loader PROGRAM OPERATION
Data Loading Software For Windows Manage Data/Software Window
Once the desired directory has been selected, clicking on the OK button
will cause the Select Data/Software to Import window to be displayed
(Figure 9-27).
2nd Edition
6 Jun 08 9-25
PROGRAM OPERATION CPAS-3000 Data Loader
Manage Data/Software Window Data Loading Software For Windows
2nd Edition
9-26 6 Jun 08
CPAS-3000 Data Loader PROGRAM OPERATION
Data Loading Software For Windows Manage Data/Software Window
CHECK INTEGRITY
The CHECK INTEGRITY button checks the integrity of the files
associated with a data/software item, verifying each file is valid.
This feature is only available for ARINC 665 formatted or Navigation
Database data/software items, and integrity checks can only be
2nd Edition
6 Jun 08 9-27
PROGRAM OPERATION CPAS-3000 Data Loader
Manage Data/Software Window Data Loading Software For Windows
REFRESH
The REFRESH button refreshes the list of data/software items displayed
in the DATA/SOFTWARE INSTALLED ON CPAS list box. If a loadset is
installed during program operation using any method other than through
the SELECT DATA/SOFTWARE TO IMPORT window (e.g., a separate
installation program for the data/software item), click on the REFRESH
button to allow CPAS to detect the newly installed data/software item.
2nd Edition
9-28 6 Jun 08
CPAS-3000 Data Loader PROGRAM OPERATION
Data Loading Software For Windows Manage Data/Software Window
ADVANCED
The ADVANCED button allows detailed information for the selected
data/software item to be viewed and load parameters for the
data/software item to be viewed and modified. This feature is
available for only one data/software item at a time, so the button will
remain grayed (disabled) until exactly one data/software item in the
DATA/SOFTWARE INSTALLED ON CPAS list box has been selected.
Once a data/software item has been selected, click on the ADVANCED
button to display the DATA/SOFTWARE PROPERTIES window (Figure
9-30). The DETAILED INFORMATION tab displays detailed information
for the data/software item. The information displayed is dependent on
the data load type of the data/software item.
2nd Edition
6 Jun 08 9-29
PROGRAM OPERATION CPAS-3000 Data Loader
Manage Data/Software Window Data Loading Software For Windows
The second tab contains the load parameters for the data/software
item. The type of tab displayed depends on what data load type the
selected data/software item is compatible with (615A, 615-3, or DBU).
In this example, a 615A data/software item had been selected, so the
615A properties tab is displayed.
NOTE
N
Modifications of these parameters could affect the success of the
actual load to the target/LRU.
2nd Edition
9-30 6 Jun 08
CPAS-3000 Data Loader PROGRAM OPERATION
Data Loading Software For Windows Manage Data/Software Window
2nd Edition
6 Jun 08 9-31
PROGRAM OPERATION CPAS-3000 Data Loader
Requesting 615A Target Data Loading Software For Windows
CLOSE
The CLOSE button closes the MANAGE DATA/SOFTWARE window.
2nd Edition
9-32 6 Jun 08
CPAS-3000 Data Loader PROGRAM OPERATION
Data Loading Software For Windows Data Loader Configuration Window
The Data Loader issues a 615A target information request for the
selected target, and the information received from the target is
displayed. The displayed messages are also logged to a text file. Upon
completion of the information request, the RETRIEVING TARGET
INFORMATION label changes to TARGET INFORMATION.
2nd Edition
6 Jun 08 9-33
PROGRAM OPERATION CPAS-3000 Data Loader
Data Loader Configuration Window Data Loading Software For Windows
GENERAL
The General section contains five check boxes
• AUTOMATICALLY ACQUIRE/REFRESH TARGETS ON STARTUP:
When this box is checked, the Data Loader will automatically issue a
Acquire/Refresh Targets query on application startup to the data load
targets attached to the Ethernet network. This box is not checked
by default.
2nd Edition
9-34 6 Jun 08
CPAS-3000 Data Loader PROGRAM OPERATION
Data Loading Software For Windows Data Loader Configuration Window
2nd Edition
6 Jun 08 9-35
PROGRAM OPERATION CPAS-3000 Data Loader
Data Loader Configuration Window Data Loading Software For Windows
The TARGET TYPE NAMES list shows the target type names for which
support information is configured. An item can be selected by clicking
on the target type name; any previous selections will be cleared and
the selected item will be highlighted. Multiple target type names may be
selected using the standard Windows Ctrl/Shift keyboard combinations.
When exactly one target type name item is selected, the support
information for the target type is displayed in the SUPPORT
INFORMATION box. The information can then be edited and saved by
clicking on the Save Updates button. The Save Updates button remains
grayed (disabled) until the support information has been edited.
The NEW button displays the Add New Target Type window (Figure
9-35).
2nd Edition
9-36 6 Jun 08
CPAS-3000 Data Loader PROGRAM OPERATION
Data Loading Software For Windows Data Loader Configuration Window
LOGGING
The CPAS-3000 will always log load information into a log file. This
information can be useful in determining the cause of unsuccessful
dataloads. The controls contained in the Logging section are:
2nd Edition
6 Jun 08 9-37
PROGRAM OPERATION CPAS-3000 Data Loader
Data Loader Configuration Window Data Loading Software For Windows
• LOG FILE DIRECTORY: Contains the directory where the log file for
the Data Loader application session is written. A log file is created for
the session when either a data load or target information request is
initially performed. The default directory for log files is C:\CPAS\Logs.
This location can be changed by entering a directory name in the
LOG FILE DIRECTORY box or by clicking on the BROWSE button
and selecting an alternative directory location. If the directory
entered did not previously exist, a message box will be presented
upon exiting the DATA LOADER CONFIGURATION window, asking
whether or not the directory should be created. Click YES to create
the directory and exit, or NO to return to the configuration window.
• LOG DETAILED LOAD INFORMATION: This box determines the
level of detail of the information logged during a load. When checked,
detailed information is logged. When not checked, only basic load
information is logged. This box is not checked by default.
NOTE
N
Beware! Logging of detailed load information may dramatically
slow down a dataload and in some cases prevent the load from
completing successfully.
RESTORE DEFAULTS
The RESTORE DEFAULTS button restores the application default
values for all of the settings on the DATA LOADER CONFIGURATION
window. When clicked, a dialog box will appear to confirm restoring the
application default values.
ADVANCED
The ADVANCED button can be used to access and to modify advanced
configuration settings. When clicked, a dialog box will appear with a
note of caution about modifying advanced settings
2nd Edition
9-38 6 Jun 08
CPAS-3000 Data Loader PROGRAM OPERATION
Data Loading Software For Windows Data Loader Configuration Window
NOTE
N
Beware! Modifications of these parameters could render the
CPAS-3000 inoperable.
FSU TAB
The FSU tab (Figure 9-36) contains parameters involving the interaction
of the Data Loader with the FSU.
2nd Edition
6 Jun 08 9-39
PROGRAM OPERATION CPAS-3000 Data Loader
Data Loader Configuration Window Data Loading Software For Windows
2nd Edition
9-40 6 Jun 08
CPAS-3000 Data Loader PROGRAM OPERATION
Data Loading Software For Windows Data Loader Configuration Window
NOTE
N
The Refresh Targets timeout value is only applicable if the
AUTOMATICALLY ACQUIRE/REFRESH TARGETS ON STARTUP
box is checked on the DATA LOADER CONFIGURATION window.
The six port controls allow the port numbers to be specified for each of
the FSU ports. The default values for each are:
• ARINC 615-3 LOW SPEED PORT is 8351
• ARINC 615-3 HIGH SPEED PORT is 8352
• FMC #1 PORT is 8353
• FMC #2 PORT is 8354
• FMC #3 PORT is 8356
• MDC PORT is 8355.
Icons in the PORT CONNECTED column indicate the connection status
of the port in that row. A green circle icon indicates the port is connected
and a red X icon indicates the port is not connected. For example, in the
FSU tab shown in Figure 9-36, the ARINC 615-3 HIGH SPEED PORT
icon indicates that the port is not connected, while the FMC #1 PORT
icon indicates that port is connected.
There will only be one ARINC 615-3 port connected at any one time.
The CPAS will connect the appropriate ARINC 615-3 port based on the
bus speed being used for the data load.
Icons in the LRU RESPONDING column indicate whether or not the
target connected through the port is responding to poll bytes sent by
the Data Loader. A green circle icon indicates the target is responding,
a green circle icon with a black plus sign (+) inscribed in the circle
2nd Edition
6 Jun 08 9-41
PROGRAM OPERATION CPAS-3000 Data Loader
Data Loader Configuration Window Data Loading Software For Windows
615A TAB
The 615A tab (Figure 9-37) contains load parameters for the ARINC
615A data load type.
2nd Edition
9-42 6 Jun 08
CPAS-3000 Data Loader PROGRAM OPERATION
Data Loading Software For Windows Data Loader Configuration Window
2nd Edition
6 Jun 08 9-43
PROGRAM OPERATION CPAS-3000 Data Loader
Data Loader Configuration Window Data Loading Software For Windows
DBU TAB
The DBU tab (Figure 9-38) contains load parameters for the DBU data
load type
2nd Edition
9-44 6 Jun 08
CPAS-3000 Data Loader PROGRAM OPERATION
Data Loading Software For Windows Data Loader Configuration Window
2nd Edition
6 Jun 08 9-45
PROGRAM OPERATION CPAS-3000 Data Loader
Data Loader Configuration Window Data Loading Software For Windows
615-3 TAB
The 615-3 tab (Figure 9-39) contains load parameters for the 615-3
data load type.
2nd Edition
9-46 6 Jun 08
CPAS-3000 Data Loader PROGRAM OPERATION
Data Loading Software For Windows Data Loader Configuration Window
2nd Edition
6 Jun 08 9-47
PROGRAM OPERATION CPAS-3000 Data Loader
Data Loader Configuration Window Data Loading Software For Windows
2nd Edition
9-48 6 Jun 08
CPAS-3000 Data Loader PROGRAM OPERATION
Data Loading Software For Windows Data Loader Configuration Window
NETWORK TAB
The NETWORK tab (Figure 9-40) contains network parameters for the
Data Loader.
2nd Edition
6 Jun 08 9-49
PROGRAM OPERATION CPAS-3000 Data Loader
Data Loader Configuration Window Data Loading Software For Windows
2nd Edition
9-50 6 Jun 08
CPAS-3000 Data Loader PROGRAM OPERATION
Data Loading Software For Windows Data Loader Configuration Window
IOC TAB
The IOC tab (Figure 9-41) contains parameters for performing ARINC
615-3 uploads to ARINC 429 based LRUs externally connected to a
data load switch through an IOC that is connected to the Avionics
System LAN.
2nd Edition
6 Jun 08 9-51
PROGRAM OPERATION CPAS-3000 Data Loader
Data Loader Configuration Window Data Loading Software For Windows
2nd Edition
9-52 6 Jun 08
CPAS-3000 Data Loader PROGRAM OPERATION
Data Loading Software For Windows Support Information
HELP INFORMATION
The online help can be accessed by selecting HELP and then HELP
TOPICS from the main CPAS-3000 Data Loader menu bar. The help
topic for a window can also be accessed directly by pressing F1 on the
keyboard while the window is currently displayed.
SUPPORT INFORMATION
For support on the CPAS-3000 Data Loader application, contact your
local Customer Support Engineer or Rockwell Collins Technical Support
at 319-295-5000.
2nd Edition
6 Jun 08 9-53
PROGRAM OPERATION CPAS-3000 Data Loader
Data Loading Software For Windows
2nd Edition
9-54 6 Jun 08
CPAS-3000 Data Loader TROUBLESHOOTING
Data Loading Software For Windows Introduction
TROUBLESHOOTING
INTRODUCTION
This section provides a few troubleshooting tips for various common
problems.
2nd Edition
6 Jun 08 10-1
TROUBLESHOOTING CPAS-3000 Data Loader
Target/LRU Missing From the Update List Data Loading Software For Windows
2nd Edition
10-2 6 Jun 08
CPAS-3000 Data Loader TROUBLESHOOTING
Data Loading Software For Windows Unable to Import a Data/Software Item
2nd Edition
6 Jun 08 10-3
TROUBLESHOOTING CPAS-3000 Data Loader
Unable to Import a Data/Software Item Data Loading Software For Windows
2nd Edition
10-4 6 Jun 08
CPAS-3000 Data Loader TROUBLESHOOTING
Data Loading Software For Windows Dataload Failure Encountered
FILE MISSING
If the load status messages indicate a file is missing from the
data/software item, exit the CPAS-3000 and verify the data/software
item is still valid and all data/software files are located in the item’s
loadset directory. Restart CPAS-3000 and retry the dataload.
2nd Edition
6 Jun 08 10-5
TROUBLESHOOTING CPAS-3000 Data Loader
Dataload Failure Encountered Data Loading Software For Windows
TIMEOUT/COUNTER ERROR
If the load status messages indicate a timeout value or a retry counter
was exceeded, verify that the advanced configuration settings and
any stored load parameter values for the data/software being loaded
are set to the default values. Refer to the Properties section under
the Manage Data/Software Window topic for information on viewing
stored load parameter values, and the Advanced section under the
Data Loader Configuration Window topic for information on viewing
advanced configuration settings. Exit CPAS-3000 and disable any
screen savers or virus protection software running on the PC, as these
items may inhibit performance of the CPAS-3000. Restart CPAS-3000
and retry the dataload.
COMMUNICATION/TRANSMISSION ERROR
If the load status messages indicate a communication or transmission
error occurred, exit CPAS-3000. Verify the FSU or other Ethernet
based LRU is operating and is properly linked to the PC through the
Ethernet connection. Also, verify that the Ethernet network connection
is properly configured for the PC. Refer to the Configuring the Network
Settings section under the Setup topic for information on configuring
the Ethernet network connection.
If dataloading to an LRU connected to the FSU (FMCs, MDC, or
429 based LRUs), ensure that the connectors to the FSU are fully
tightened. Restart CPAS-3000 and retry the dataload. If a transmission
or communication error occurs again, verify that the advanced
configuration settings and any stored load parameter values for the
data/software being loaded are set to the default values. Refer to the
Properties section under the Manage Data/Software Window topic
for information on viewing stored load parameter values, and the
Advanced section under the Data Loader Configuration Window topic
for information on viewing advanced configuration settings. Disable any
screen savers or virus protection software running on the PC, as these
items may inhibit performance of the CPAS-3000. Restart CPAS-3000
and retry the dataload.
If the problem persists, refer to the Support Information topic for support
contact information.
2nd Edition
10-6 6 Jun 08
CPAS-3000 Data Loader TROUBLESHOOTING
Data Loading Software For Windows Other Notes
LOAD ABORTED
If the load status messages indicate the load is aborted by the target
hardware with either a LUH received failure or file received failure,
the network adapter may be misconfigured. Verify that the network
parameters are set to the default values (or to the appropriate settings
for the target/LRU being loaded). Refer to the Network Tab under the
Advanced section of the Data Loader Configuration Window topic for
information on viewing the network parameters.
OTHER NOTES
• Disable any internet security software, like firewalls and Virtual
Private Network (VPN) software, that may be running on the PC, as
these programs can block network traffic needed to communicate
with the LRUs. These programs should be re-enabled before
connecting the PC into any internet or office network.
• Disabling virus protection software before starting CPAS-3000 is
recommended, as it may inhibit the performance of CPAS-3000
dataloads.
• Software that might cause the PC to enter a sleep mode if no
keyboard or mouse activity occurs, such as screen savers or power
savers, may inhibit the performance of CPAS-3000 dataloads.
Disabling this software before starting CPAS-3000 is recommended.
2nd Edition
6 Jun 08 10-7
TROUBLESHOOTING CPAS-3000 Data Loader
Data Loading Software For Windows
2nd Edition
10-8 6 Jun 08
CPAS-3000 Data Loader OPERATOR’S GUIDE
Data Loading Software For Windows Index
INDEX
Subject Page
A
Acquire/Refresh Targets ................................................................. 9-10
Acronyms: CPAS-3000 .................................................................. 1- 1
Advanced ....................................................................................... 9-29
Advanced button ............................................................................ 9-38
Always Close on Successful Load ................................................. 9-35
Automatically initiate dataload mode on FSU ................................. 9-35
Automatically refresh targets on startup ......................................... 9-34
B
Begin loading .................................................................................. 9-13
C
Cancel loading ................................................................................ 9-15
Check Integrity of Selected Data/Software ..................................... 9-18
Close .............................................................................................. 9-32
Communication/transmission error ............................................... 10- 6
Configuration window: 615-3 Tab ................................................... 9-46
Configuration window: 615A Tab .................................................... 9-42
Configuration window: DBU Tab .................................................... 9-44
Configuration window: FSU tab ...................................................... 9-39
Configuration window: IOC tab ...................................................... 9-51
Configuration window: network tab ................................................ 9-49
Configure Dataload Network Adapter Settings Window ................. 6- 2
CPAS-3000 Data Loader system requirements .............................. 3- 1
CPAS-3000 Data Loader window ................................................... 9- 8
CPAS-3000 Data Loader: installation failure ................................ 10- 1
CPAS-3000 Data Loader: installing ................................................ 4- 1
CPAS-3000 Data Loader: package contents ................................. 3- 2
CPAS-3000 Data Loader: program limitations ............................... 8- 1
CPAS-3000 Data Loader: starting .................................................. 4- 2
CPAS-3000 Data Loader: uninstalling ............................................ 4- 2
CPAS-3000 Data Loader: unlock software window ........................ 5- 1
CPAS-3000 Launch Pad ................................................................ 3- 2
CPAS-3000 Launch Pad window ................................................... 9- 1
2nd Edition
6 Jun 08 Index-1
OPERATOR’S GUIDE CPAS-3000 Data Loader
Index Data Loading Software For Windows
Subject Page
D
Data load types: ARINC 615-3 ....................................................... 2- 1
Data load types: ARINC 615A ........................................................ 2- 1
Data Load Types, overview ............................................................ 2- 1
Data load types: RS-422 DBU-based ............................................ 2- 1
Data Loader Configuration window ................................................ 9-33
Data Loader Configuration window: advanced .............................. 9-38
Data Loader Configuration window: general .................................. 9-34
Data Loader Configuration window: logging .................................. 9-37
Data Loader Configuration window: restore defaults ..................... 9-38
Data/Software fails an integrity check .......................................... 10- 5
Data/Software not shown in Select Data/Software to Import
Window ..................................................................................... 10- 4
Data/software, downloading ........................................................... 7- 3
Data/software, importing ................................................................ 7- 4
Data/software, uploading ................................................................ 7- 1
Dataload failure encountered: Communication/transmission
error .......................................................................................... 10- 6
Dataload failure encountered: File missing .................................. 10- 5
Dataload failure encountered: Timeout/counter error .................. 10- 6
Dataload Network Adapter Settings Window, configure ................. 6- 2
Dataload Network Adapter Window: select .................................... 6- 1
DBU Tab ......................................................................................... 9-44
Delete log files ................................................................................ 9-38
Downloading data/software ............................................................ 7- 3
E
Error occurred during import ........................................................ 10- 4
Exiting CPAS-3000 Window ........................................................... 9- 5
F
File missing .................................................................................. 10- 5
File Progress bar ............................................................................ 9-15
File Server Unit: overview .............................................................. 2- 1
FSU tab .......................................................................................... 9-39
FSU: See File Server Unit .............................................................. 2- 1
2nd Edition
Index-2 6 Jun 08
CPAS-3000 Data Loader OPERATOR’S GUIDE
Data Loading Software For Windows Index
Subject Page
H
Hard drive: loading from ................................................................. 9-13
Help information ............................................................................. 9-53
I
Import button .................................................................................. 9-23
Importing data/software .................................................................. 7- 4
Installation failure: CPAS-3000 Data Loader ................................ 10- 1
Installed data/software not shown in the Manage window ........... 10- 3
Installing CPAS-3000 Data Loader ................................................. 4- 1
Installing CPAS-3000 Data Loader: items needed ......................... 3- 2
Installing CPAS-3000 Data Loader: setup ...................................... 3- 2
Insufficient hard drive memory ..................................................... 10- 1
Integrity Check: Data/Software Fails ............................................ 10- 5
Introduction: CPAS-3000 Data Loader ........................................... 2- 1
IOC tab ........................................................................................... 9-51
L
Launch Pad. See CPAS-3000 Launch Pad .................................... 3- 2
Limitations of program .................................................................... 8- 1
Load direction ................................................................................. 9- 9
Load From Hard Drive .................................................................... 9-13
Load state icons ............................................................................. 9-14
Load, status of ................................................................................ 9-14
Loading, begin ................................................................................ 9-13
Loading, cancel .............................................................................. 9-15
Loading: from hard drive ................................................................ 9-13
Log detailed load information ......................................................... 9-38
Log file ............................................................................................ 9-37
Log file directory ............................................................................. 9-38
M
Manage data/software window ....................................................... 7- 4
Manage Data/Software Window ..................................................... 9-21
Manage Data/Software Window: import ......................................... 9-23
Manage Data/Software Window: remove ....................................... 9-22
N
Network tab .................................................................................... 9-49
2nd Edition
6 Jun 08 Index-3
OPERATOR’S GUIDE CPAS-3000 Data Loader
Index Data Loading Software For Windows
Subject Page
No targets available to update ...................................................... 10- 1
O
Operation, program ........................................................................ 9- 1
Optional Pop-Up Windows ............................................................. 9-19
Overall Progress bar ...................................................................... 9-15
P
Package contents: CPAS-3000 Data Loader ................................. 3- 2
PC Network Adapter Window: selecting ........................................ 6- 1
Program operation .......................................................................... 9- 1
Program operation: supported functions ........................................ 9- 1
Program: limitations of ................................................................... 8- 1
Q
Quick Start Checklist Window ........................................................ 9- 6
Quick Start procedures ................................................................... 7- 1
Quick Start Tips window ................................................................. 9- 2
R
Refresh ........................................................................................... 9-28
Remove button ............................................................................... 9-22
Restore 615A Defaults button ........................................................ 9-44
Restore DBU Defaults button ......................................................... 9-46
Restore Defaults button .................................................................. 9-38
Restore FSU Defaults button ......................................................... 9-42
Restore Network Defaults button ................................................... 9-49
S
Screen savers: disabling .............................................................. 10- 7
Select Data/Software to be Updated .............................................. 9-11
Select Target/LRU To Be Updated ................................................. 9-10
Select the Dataload Network Adapter Window .............................. 6- 1
Select the PC Network Adapter ...................................................... 6- 1
Setup: CPAS-3000 Data Loader .................................................... 3- 2
Show All Optional Pop-Up Windows .............................................. 9-35
Show Detailed Information ............................................................. 9-17
Show tool tips ................................................................................. 9-35
Sleep mode: disabling .................................................................. 10- 7
2nd Edition
Index-4 6 Jun 08
CPAS-3000 Data Loader OPERATOR’S GUIDE
Data Loading Software For Windows Index
Subject Page
Starting CPAS-3000 Data Loader .................................................. 4- 2
Starting CPAS-3000 Window .......................................................... 9- 4
Status tabs ..................................................................................... 9-14
Support: CPAS-3000 Data Loader ................................................. 9-53
System requirements for CPAS-3000 Data Loader ........................ 3- 1
T
Tab, 615-3 ...................................................................................... 9-46
Tab, 615A ....................................................................................... 9-42
Target information ........................................................................... 9-32
Target Information window: 615A ................................................... 9-32
Target/LRU missing from the update list ...................................... 10- 2
Timeout/counter error ................................................................... 10- 6
Troubleshooting: Dataload failure encountered ........................... 10- 5
Troubleshooting: Installed data/software not shown in the Manage
window ...................................................................................... 10- 3
Troubleshooting: insufficient hard drive memory .......................... 10- 1
Troubleshooting: no targets available to update .......................... 10- 1
Troubleshooting: other notes ....................................................... 10- 7
Troubleshooting: screen savers, sleep mode .............................. 10- 7
Troubleshooting: Target/LRU missing from the update list .......... 10- 2
Troubleshooting: Unable to import a data/software item .............. 10- 3
Troubleshooting: unable to register the COM objects .................. 10- 1
Troubleshooting: virus protection software .................................. 10- 7
U
Unable to import a data/software item: Data/Software not
shown ....................................................................................... 10- 4
Unable to import a data/software item: Error occurred during the
import ........................................................................................ 10- 4
Unable to register the COM objects ............................................. 10- 1
Uninstalling CPAS-3000 Data Loader ............................................ 4- 2
Unlock software window: CPAS-3000 Data Loader ....................... 5- 1
Uploading data/software ................................................................. 7- 1
V
View configuration .......................................................................... 9-33
Virus protection: disabling ............................................................ 10- 7
2nd Edition
6 Jun 08 Index-5
OPERATOR’S GUIDE CPAS-3000 Data Loader
Index Data Loading Software For Windows
Subject Page
W
Window controls: CPAS-3000 Data Loader ................................... 9- 8
2nd Edition
Index-6 6 Jun 08
This page intentionally left blank
523-0810629-002117
© Copyright 2008, Rockwell Collins, Inc.,
All Rights Reserved, Printed in USA