Professional Documents
Culture Documents
PROJECT NAME
LOCATION
ARCHITECT
ENGINEER
CONTRACTOR
SUBMITTED BY DATE
UNIT SUMMARY
Quantity
Unit Designation
Model No.
Total Cooling
Sensible Cooling
Heating Input
Heating Output
CFM/ESP
EER/SEER
Electrical
Minimum Ampacity
Min.-Max. Breaker
Accessory
Figure 2
Figure 1
RLNL-G STANDARD FEATURES INCLUDE:
• R-410A HFC refrigerant. • Forkable base rails for easy handling and lifting.
• Complete factory charged, wired and run tested. • Single point electrical connections.
• Scroll compressors with internal line break overload and • Internally sloped slide out condensate pan conforms to
high-pressure protection. ASHRAE 62 standards.
• Dual stage compressor on all models. • High performance belt drive motor with variable pitch pulleys
• Convertible airflow – vertical downflow or horizontal sideflow. and quick adjust belt system.
• TXV refrigerant metering system on each circuit. • Permanently lubricated evaporator, condenser and gas heat
inducer motors.
• High Pressure and Low Pressure/Loss of charge protection
standard on all models. • Condenser motors are internally protected, totally enclosed
with shaft down design.
• Solid Core liquid line filter drier on each circuit.
• 2 inch filter standard with slide out design.
• Single slab, single pass designed evaporator and condenser
coils facilitate easy cleaning for maintaining high efficiencies. • 24 volt control system with resettable circuit breakers.
• Cooling operation up to 125 degree F ambient. • Colored and labeled wiring.
• Foil faced insulation encapsulated throughout entire unit • Copper tube/Aluminum Fin coils.
minimizes airborne fibers from the air stream. • Supplemental electric heat provides 100% efficient heating.
• Hinged major access door with heavy-duty gasketing, 1/4 • Factory Installed ClearControl™ (DDC) and sensors which can
turn latches and door retainers. connect to LonWorks™ or BACnet® BAS systems for remote
• Slide Out Indoor fan assembly for added service monitoring and control.
convenience. • Variable Frequency Drive (VFD).
• Powder Paint Finish meets ASTMB117 steel coated on each • HumidiDry™ Dehumidification System.
side for maximum protection. G90 galvanized.
• Base pan with drawn supply and return opening for superior
water management.