Professional Documents
Culture Documents
MAGNETIC PARTICLEINSPECTION REPORT
Project: WELDING PROCEDURE QUALIFICATION TEST
Report No.: MEL-WQ-VIS-013
Date: 15/02/2022
Client: MELCO ENGINEERING PTY LTD
Job No.: JN-23195DK
Item Description: WELDING PROCEDURE QUALIFICATION
This report contains Inspection result related to Results of examination are detailed in Table 1 of
this report. All measurements provided in millimetres unless stated otherwise. was undertaken
and examined to the requirements of AS 1171-1998 AS/NZS 1554.1 2014 for l assessment
compliance of welding cracks defects.
a. Test Standard: AS 1171-1998
b. Inspection Codes: AS/NZS1554.1 SP
c. Technique: Magnetic Flow
d. Current Type: Sustained
e. Magnet: AC yoke MT48
f. Media: Sustained
g. Material: Carbon Steel NFS
h. Surface Condition: As welded / Flush ground
i. Features observed: See Remarks (if any)
j. Place of Inspection: Melco Engineering Workshop, Paget
Remarks:
This inspection was done in-house according to requirements in AS1171 -2018, but without Nata-certified
requirements
Examined by:
Signature:
Page 1 of 2
Date: 14/02/2023
Item examined Defects detected: Interpretation
Page 2 of 2