Professional Documents
Culture Documents
0 AH
Features
• Absorbent Glass Mat (AGM) technology for superior
performance
11
fasteners
15-min. (21.5A to 9.00 volts)................................................ 5.38 AH
Physical Dimensions: in (mm) Approximate Weight .......................................... 7.92 lbs. (3.59 kg)
Energy Density (20-hr. rate) .............. 1.69 W-h/in3 (103.41 W-h/l)
Specific Energy (20-hr. rate) ............. 18.18 W-h/lb (40.08 W-h/kg)
W Internal Resistance (approx.) ...................................... 20 milliohms
Max Discharge Current (7 Min.) ................................ 36.0 amperes
Max Short-Duration Discharge Current (10 Sec.)... 120.0 amperes
Shelf Life (% of nominal capacity at 68°F (20°C)
1 Month .................................................................................. 97%
3 Months................................................................................. 91%
HT
H 6 Months ................................................................................ 83%
Operating Temperature Range
Charge. ................................................. -4°F (-20°C) to 122°F (50°C)
L
Discharge............................................. -40°F (-40°C) to 140°F (60°C)
F2: L: 5.94 (151) W: 3.86 (98) H: 3.66 (93) HT: 3.86 (98)
Case................................................................................... ABS Plastic
NB: L: 5.94 (151) W: 3.86 (98) H: 3.66 (93) HT: 4.09 (104)
Power-Sonic Chargers..............................PSC-122000A, 122000A-C
Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for
height dimensions. All data subject to change without notice.
To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website.
All data subject to change without notice. www.power-sonic.com
®
PS-12120 12 Volt 12.0 AH
Charging is not o o
necessary unless Ambient Temperature 20 C (68 F)
100% of capacity 13.0
is required.
80
Voltage
10.5V 80
2
10.2V
60
1 Float Charging Voltage
40
2.25 - 2.30 V/Cell
9.6V
30 20
0
min
9.0V 0 1 2 3 4
o o
10 40 C (104 F)
o o
20 C (68 F)
Years
o o
0 C (32 F)
5 8.1V
Life Characteristics in Cyclic Use
0.60 1.2 2.4 6.0 12 24
120
Discharge Current (A)
100
Retention Capacity (%)
Charging 80
Cycle Applications: Limit initial current to 3.6A. Charge until battery voltage (under
charge) reaches 14.4 to 14.7 volts at 68°F (20°C). Hold at 14.4 to 14.7 volts until 60
Discharge Discharge Discharge
current drops to under 120mA. Battery is fully charged under these conditions, and Depth 100% Depth 50% Depth 30%
charger should be disconnected or switched to “float” voltage. 40
1. Discharge Current 0.2C (Final Voltage 1.7V/Cell)
“Float” or “Stand-By” Service: Hold battery across constant voltage source of 13.5 20 2. Charge Current: 0.1C
to 13.8 volts continuously. When held at this voltage, the battery will seek its own 3. Ambient Temperature: 20oC to 25oC (68oF to 77oF)
current level and maintain itself in a fully charged condition.
0
0 200 400 600 800 1000 1200
Note: Due to the self-discharge characteristics of this type of battery, it is imperative
that they be charged within 6 months of storage, otherwise permanent loss of Number of Cycles
capacity might occur as a result of sulfation.
CORPORATE OFFICE • 7550 Panasonic Way • San Diego, CA 92154 • USA • Tel: +1-619-661-2020 • Fax: +1-619-661-3650 0814 1M
© 2013. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners.