Professional Documents
Culture Documents
Full Output
Note: Section Designed to Eurocodes, United Kingdom National Annex
Construction Stage: FAIL Max Unity Factor: 1.09
Normal Stage: PASS Max Unity Factor: 0.48
Fire Condition: PASS Max Unity Factor: 0.52
Serviceability: UNSATISFACTORY Max Unity Factor: 1.14
*** Section Inadequate ***
Floor Plan Data (unpropped composite construction with ComFlor 46/1.2/S280 decking)
Beam centres 3.00 m Profile span type Single
Beam or wall width 152 mm Propping None
Concrete span type Single
Profile Data (ComFlor 46/1.2/S280 decking.)
Depth 46 mm Pitch of deck ribs 225 mm
Trough width 105 mm Crest width 67.0 mm
Nominal sheet thickness 1.20 mm Design sheet thickness 1.16 mm
Deck weight 0.13 kN/m² Yield strength 280 N/mm²
Concrete Slab (Normal Weight Concrete ; Grade C20/25; Mesh : A193)
Overall slab depth 120 mm
Concrete characteristic strength 20 N/mm² Concrete wet density 2550 kg/m³
Modular ratio 14.02 Concrete dry density 2450 kg/m³
Bar reinforcement :
Diameter 10 mm Yield strength 390 N/mm²
Distance from slab soffit 40 mm
Mesh reinforcement :
Mesh A193 Yield strength 500 N/mm²
Cover to Mesh 30 mm Mesh Layers Single
Account for End Anchorage No Shear connectors per rib N/A
Diameter of Shear Connectors N/A
Screeds N/A
Section Properties
*** Note - 1: All values of inertia are expressed in steel units
*** Note - 2: Average inertia is used for deflection calculations for the composite stage
*** Note - 3: Cracked dynamic inertia is used for natural frequency calculations
Deck Profile
Sagging Inertia, Iy 54.021 cm4/m Area of profile (Net), Ap 1534 mm²/m
Hogging Inertia, Iy 54.703 cm4/m Effective area of profile 1130.00 mm²/m
Composite
Inertia, Iy - Uncracked 1099 cm4/m Inertia, Iy - Cracked 757 cm4/m
Average inertia 928 cm4/m Cracked inertia (dynamic) 955 cm4/m
Shear bond coefficients - Mr 41.66 Kr 0.073000
Concrete volume 0.101 m³/m/m
Loads Acting on Slab (Actions)
*** Note: Slab subjected to uniformly distributed loads (UDL) ONLY
Imposed (occupancy) 3.00 kN/m² Partitions 1.00 kN/m²
Ceilings and services 0.50 kN/m² Finishes 0.50 kN/m²
Self weight of concrete slab (wet) 2.97 kN/m² Self weight of decking 0.13 kN/m²
Self weight of concrete slab (dry) 2.86 kN/m² Screeds None
Construction load 1.50 kN/m²
Line Loads Perpendicular to Deck Span (Actions)
None
Line Loads Parallel to Deck Span (Actions)
None
File Name: v9.0.34.24751
ComFlor 46/1.2/S280 Eurocodes Page 2 of 3
Fire Data
Design method Bar Method Fire resistance period 60 mins
Non-permanent imposed loads N/A
Partial Safety Factors
Actions Materials
Permanent, gamma G 1.35 Structural steel - elastic, gamma M0 1.00
Permanent - accidental, gamma GA N/A Structural steel - buckling, gamma M1 1.00
Variable, gamma Q 1.50 Concrete, gamma C 1.50
Combination factor - Fire, psi 1 0.70 Reinforcement, gamma S 1.15
Combination factor, psi 0 0.70 Combination factor, psi 2 0.60
Construction Stage
Normal Stage
Span
The effective composite span is 2.95 m
Loadings @ SLS (kN/m²) @ ULS (kN/m²)
Dead (Profile, concrete, reinforcement) 3.05 4.11
Imposed 4.00 6.00
Superimp (Ceiling, services, screed, finishes) 1.00 1.35
Total 8.05 11.46
All line and point described above in 'Loading Details' are applied at the Normal stage
Shear Resistance Check
Vertical Shear (Proprietary Method)
Maximum applied shear 16.29 kN/m
Shear resistance of end diaphragm (ComFlor 225 only) 0.00 kN/m ***test value
Vertical shear resistance in the troughs is the greater of:
1. (0.44 * 610.63 * 80.00) / 1000
2. (0.12 * 2.00 * (100 * 0.01 * 20.00)^1/3) * 610.63 * 80.00) / 1000
= 28.45 kN/m
Vertical shear resistance above the ribs is the greater of:
1. (0.44 * 258.94 * 33.50) / 1000
2. (0.00 * 2.00 * (100 * 0.01 * 20.00)^1/3) * 258.94 * 33.50) / 1000
= 4.93 kN/m
Vertical shear resistance of the decking is:
(1000 / 105.00) * 2 *9767.21 * Cos(30.58) / 1000= 74.74 kN/m
Total vertical shear resistance is:= 108.12 kN/m
Unity Factor = 16.29/108.12 = 0.15 < 1 PASS
Punching Shear (BS EN 1994-1-1 Clause 9.7.6)
N/A - no concentrated loads have been applied
Bending Resistance Check (BS EN 1994-1-1 Clause 9.7.2)
Applied bending moment 11.04 kNm/m
Depth of concrete stress block 22.76 mm
Lever arm 88.77 mm
Compression in concrete 206.32 kN/m
Moment Resistance 22.87 kNm/m
Unity Factor = 11.04/22.87 = 0.48 < 1 PASS
Fire Resistance
Effective span in fire 2.85 m
Fire total UDL 6.85 kN/m²
Fire free moment 6.95 kNm/m
Total moment resistance 13.41 kNm/m
Unity Factor 0.52 PASS
Deflection
Properties
Modular ratio 14.02
Uncracked section inertia 10989130.00 mm4
Cracked section inertia 7573323.00 mm4
Deflection Checks
Imposed load deflection 2.00 mm
Allowable deflection (20 mm max) 20.00 mm SATISFACTORY
Total deflection 2.50 mm
Allowable deflection 11.79 mm PASS
Dynamic Sensitivity
Dynamic inertia (cracked section) 955.32 cm4
Maximum deflection 2.16 mm
Frequency 12.25 Hz
Unity Factor = 5.00/12.25 = 0.41 < 1 PASS