Professional Documents
Culture Documents
Efficiency Interchangeability
■ Lower Specific Speed Design: Large diameter impeller To optimize wear life and flexibility, various hydraulic design
allows the pump to run slower for better parts wear life and material options can be used on the same mechanical
and gives the pump the ability to operate over a wide end. Easily modified for changing conditions.
range of flows to meet varying flow conditions.
Reliability in Design
Maintenance Friendly
■ Impeller Release Ring: Provides for easy impeller removal TBC pumps are constructed as horizontal end suction centrifugal
and is standard on all TBC pumps. The 3 piece segmented pumps to give maximum resistance to solids. The pump design can
ring is mounted between shaft sleeve and shaft shoulder. withstand very high pressures. The pressure load against the shell
Drastically reduces time for wet end change outs for less is transferred to non-wearing side plates which are held together
down time. by large tie bolts to ensure safety. Shell and impeller hydraulics are
■ TBC 54 and larger pumps have a special 2-piece suction computer designed to optimize performance and wear, providing
plate design for more uptime and increased production. high suction capability and large solids passage. The TBC pump is
Inner suction plate “Front Door” allows replacement of constructed of abrasion resistance white irons, ductile irons and
suction liner and impeller without removing the outer special alloys to match duty requirements. Alternative wear liner
suction plate. materials such as urethane and neoprene are also available.
300 24x
20x 24 90
22 T TBC
BC 5 57
4
48
58
BC
Head (m)
Head (ft)
46
62
64
34 T
TBC
26x BC 52 4
46
T C6
TBC
24x 4 TBC
TBC
200 60
30x
TBC
28
B
24x 28 T
18
24x
28
2
20
18x
24x
28
20x
100 30
0 0
1,000 10,000 100,000
Flowrate (gpm)