Professional Documents
Culture Documents
OWNER : ONGC
Format No. EIL 1641-1924 Rev. 1 Copyright EIL – All rights reserved
ADDENDUM TO STANDARD SPECIFICATION FOR
SEAMLESS SUBMARINE LINE PIPE (SOUR SERVICE) DOCUMENT No.
SPECIFICATION NO.6-71-008 Rev-3
(PIPELINE ENGINEERING) A108-001-16-71-SP-01 Rev B
Page 2 of 3
1.1 Refer Clause No. 1.1, Purpose and Coverage, Page 4 of 22.
1st Para of Cl. No. 1.1; “This specification.....applicable.” stands replaced by the
following as below:
1.2 Refer Clause No. 1.1, Purpose and Coverage, Page 4 of 22.
4th Para of Cl. No. 1.1; “The Manufacturer ….. Level PSL 2.” stands replaced
by the following as below:
1.3 Refer Clause No. 6.1.1 Table 2B: PSL 2 Chemical Requirements for Heat
and Product Analyses by Percentage of Weight Chemical Composition,
Page 5 of 22.
Format No. EIL 1641-1924 Rev. 1 Copyright EIL – All rights reserved
ADDENDUM TO STANDARD SPECIFICATION FOR
SEAMLESS SUBMARINE LINE PIPE (SOUR SERVICE) DOCUMENT No.
SPECIFICATION NO.6-71-008 Rev-3
(PIPELINE ENGINEERING) A108-001-16-71-SP-01 Rev B
Page 3 of 3
1.4 Refer Clause No. 9.3.8, Hydrogen Induced Cracking (HIC) Test, Page 10 of
22.
The Crack Sensitivity Ratio (CSR) indicated in 5th line shall be read as ‘0%’ in
place of ‘1%’.
Format No. EIL 1641-1924 Rev. 1 Copyright EIL – All rights reserved