Professional Documents
Culture Documents
Submitted by: -
Phone Mobile/Office:
E-mail:
Date: 13/02/2023
Table of content
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 2 / 21
Version: 1.11.0
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 3 / 21
Version: 1.11.0
1.1 Supports
Concrete supports:
Steel supports:
1.2 Nodes
Node No. X [mm] Y [mm] Z [mm] Connector Type Support No. Connector name Connector variant
2 1200.00 3650.00 -1000.00Base connector 1 MT-B-O2 MT-B-O2 (C_DF)
4 1200.00 3650.00 -1300.00Base connector 2 MT-B-O2 MT-B-O2 (C_DF)
6 1200.00 3650.00 -1600.00Base connector 3 MT-B-O2 MT-B-O2 (C_DF)
1.3 Members
Main Member No. Item number Member Name Node start Node end Start Release End Release Rotation[°]
1 2268506 MT-40 1 2 - - 0.00
2 2268506 MT-40 3 4 - - 0.00
3 2268506 MT-40 5 6 - - 0.00
No. Main Member No. Main Member Name Media Interafce Member Start Position Length [mm] Z-Position Y Orientation
1.5 Gliders
No. Glider No. Position on bar [mm] Travel [mm] Start [mm] End [mm] Custom Load
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 4 / 21
Version: 1.11.0
2 Part list
2.1 Channels
Quantity Description Item No. Weight [kg] Length [mm] Cutting type Member No. Price
3 I.-Channel MT-40 2268506 7.28 1190.90 N - None 1, 2, 3 0.00
Quantity Description Item No. Weight [kg] Length [mm] Cutting type Node No. Price
3 2-hole Baseplate MT-B-O2 2272094 3.08 - - 2, 4, 6 0.00
Quantity Description Item No. Weight [kg] Length [mm] Cutting type Node No. Price
2.4 Accessories
Quantity Description Item No. Weight [kg] Length [mm] Cutting type Member No. Price
6 Hexagon bolt MT-TLB 2273254 0.15 - - - 0.00
6 Twist-Lock MT-TL M10 2272080 0.21 - - - 0.00
Threaded stud X-BT-MR M10/15
6 2194340 0.06 - - - 0.00
SN 8
Flat washer 10 10,5x20x2 ISO
6 2184477 0.02 - - - 0.00
7089 A4 200
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 5 / 21
Version: 1.11.0
3 Load Types
3. Loads
2D objects:
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 6 / 21
Version: 1.11.0
No. Load Type Members Position [mm] Fx [kN] Fy [kN] Fz [kN] Mx [kNm] My [kNm] Mz [kNm]
1 Seismic (+x) 1 400.00 1.40 -0.00 -0.00 -0.00 -0.00 -0.00
2 Seismic (-x) 1 400.00 -1.40 -0.00 -0.00 -0.00 -0.00 -0.00
3 Seismic (-x) 2 400.00 1.40 -0.00 -0.00 -0.00 -0.00 -0.00
4 Seismic (+x) 2 400.00 -1.40 -0.00 -0.00 -0.00 -0.00 -0.00
5 Seismic (-x) 3 400.00 1.40 0.00 0.00 0.00 0.00 0.00
6 Seismic (+x) 3 400.00 -1.40 -0.00 -0.00 -0.00 -0.00 -0.00
7 Cables 1 600.00 0.00 0.00 -0.44 0.00 0.00 0.00
8 Cables 2 600.00 0.00 0.00 -0.44 0.00 0.00 0.00
9 Cables 3 600.00 0.00 0.00 -0.44 0.00 0.00 0.00
10 Self Weight Support 1 1200.00 0.00 0.00 -0.01 0.00 0.00 0.00
11 Self Weight Support 2 1200.00 0.00 0.00 -0.01 0.00 0.00 0.00
12 Self Weight Support 3 1200.00 0.00 0.00 -0.01 0.00 0.00 0.00
Start End
Mx My Mz
No. Load Type Members Position Position Fx [kN/m] Fy [kN/m] Fz [kN/m]
[kNm/m] [kNm/m] [kNm/m]
[mm] [mm]
13 Self Weight Support 1 0.00 1200.00 0.00 0.00 -0.02 0.00 0.00 0.00
14 Self Weight Support 2 0.00 1200.00 0.00 0.00 -0.02 0.00 0.00 0.00
15 Self Weight Support 3 0.00 1200.00 0.00 0.00 -0.02 0.00 0.00 0.00
No. Load Type Loading object Load applied to surface Pressure load kN/m²
☑All loads in these load cases are converted to seismic in +/-X, +/-Y and +/-Z
☐Loads not considered for seismic load conversion
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 7 / 21
Version: 1.11.0
4 Load Combinations
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 8 / 21
Version: 1.11.0
5 Results
5.1 Calculation summary
5.1.1 Members
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 9 / 21
Version: 1.11.0
5.2 Members
5.2.2.1 Overview
Member
Type Load Combination: σ[N/mm²] τ[N/mm²]σeqv[N/mm²]σ[N/mm²]limitτ[N/mm²]limitUtilization
No.
1 MT-40 1.35 * LC1 + 1.50 * LC4 156.76 -5.06 156.81 277.27 160.08 56.55%
2 MT-40 1.35 * LC1 + 1.50 * LC4 156.76 -5.06 156.81 277.27 160.08 56.55%
3 MT-40 1.35 * LC1 + 1.50 * LC4 156.76 -5.06 156.81 277.27 160.08 56.55%
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 10 / 21
Version: 1.11.0
Beam No. 1
Beam No. 2
Beam No. 3
Normal load
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 11 / 21
Version: 1.11.0
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 12 / 21
Version: 1.11.0
Torsion around X
Moment around Y
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 13 / 21
Version: 1.11.0
Moment around Z
Buckling ratio
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 14 / 21
Version: 1.11.0
Criteria
☑ Maximum Allowable Deflection (Beam) L/200 (System Default)
☑ Maximum Allowable Deflection (Cantilever) L/150 (System Default)
- Maximum Deflection (Absolute) - -
☑ No Deflection checks calculated for 1.50mm (User Defined)
Overview
Results
Member Reference Max
Load Combination: Governing criteria Limit Utilization(%)
No. Length[mm] deflection[mm]
1 1.00 * LC1 + 1.00 * LC4 Relative(Cantilever) 1200.00 L/150 7.00 87.44
2 1.00 * LC1 + 1.00 * LC4 Relative(Cantilever) 1200.00 L/150 7.00 87.44
3 1.00 * LC1 + 1.00 * LC4 Relative(Cantilever) 1200.00 L/150 7.00 87.44
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 15 / 21
Version: 1.11.0
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 16 / 21
Version: 1.11.0
5.3.1 Overview
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 17 / 21
Version: 1.11.0
5.4.1Overview
Governing Load
1.35 * LC1 + 1.50 * LC4
Combination
Governing Load
1.00 * LC1 + 1.00 * LC4 + 1.00 * LC14
Combination
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 18 / 21
Version: 1.11.0
Resistance:
Anchor no. Vy Vz
1 ✔ -
2 Friction Lock ✔
Governing Load
1.00 * LC1 + 1.00 * LC4 + 1.00 * LC13
Combination
Resistance:
Anchor no. Vy Vz
1 ✔ -
2 Friction Lock ✔
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 19 / 21
Version: 1.11.0
Governing Load
1.00 * LC1 + 1.00 * LC4 + 1.00 * LC13
Combination
Resistance:
Anchor no. Vy Vz
1 ✔ -
2 Friction Lock ✔
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 20 / 21
Version: 1.11.0
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 21 / 21