Professional Documents
Culture Documents
Project: Microsoft DC
Submitted by: -
Phone Mobile/Office:
E-mail:
Date: 25/09/2022
Table of content
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 2 / 22
Version: 1.10.0
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 3 / 22
Version: 1.10.0
1.1 Supports
Concrete supports:
Steel supports:
1.2 Nodes
Node No. X [mm] Y [mm] Z [mm] Connector Type Support No. Connector name Connector variant
1 0.00 0.00 0.00 Base connector 1 MT-B-O2 OC MT-B-O2 OC (C_DF)
3 1000.00 0.00 0.00 Base connector 2 MT-B-O2 OC MT-B-O2 OC (C_DF)
5 0.00 0.00 -1050.00Connector - MT-C-LL1 OC MT-C-LL1 OC (C)
6 1000.00 0.00 -1050.00Connector - MT-C-LL1 OC MT-C-LL1 OC (C)
7 0.00 0.00 -750.00Connector - MT-C-LL1 OC MT-C-LL1 OC (C)
8 1000.00 0.00 -750.00Connector - MT-C-LL1 OC MT-C-LL1 OC (C)
1.3 Members
Main Member No. Item number Member Name Node start Node end Start Release End Release Rotation[°]
1 2268508 MT-40 1 2 - - 0.00
2 2268508 MT-40 3 4 - - 180.00
3 2268508 MT-40 5 6 1 2 0.00
4 2268508 MT-40 7 8 3 4 0.00
No. Main Member No. Main Member Name Media Interafce Member Start Position Length [mm] Z-Position Y Orientation
1.5 Gliders
No. Glider No. Position on bar [mm] Travel [mm] Start [mm] End [mm] Custom Load
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 4 / 22
Version: 1.10.0
2 Part list
2.1 Channels
2.4 Accessories
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 5 / 22
Version: 1.10.0
3 Load Types
3. Loads
2D objects:
No. Load Type Members Position [mm] Fx [kN] Fy [kN] Fz [kN] Mx [kNm] My [kNm] Mz [kNm]
1 Cables 3 500.00 0.00 0.00 -0.49 0.00 0.00 0.00
Self Weight
2 1 0.00 0.00 0.00 -0.01 0.00 0.00 0.00
Support
3 Seismic (+x) 1 0.00 0.00 0.00 0.00 0.00 0.00 0.00
4 Seismic (-x) 1 0.00 -0.00 0.00 0.00 0.00 0.00 0.00
5 Seismic (+y) 1 0.00 0.00 0.00 0.00 0.00 0.00 0.00
6 Seismic (-y) 1 0.00 0.00 -0.00 0.00 0.00 0.00 0.00
7 Seismic (+z) 1 0.00 0.00 0.00 0.00 0.00 0.00 0.00
8 Seismic (-z) 1 0.00 0.00 0.00 -0.00 0.00 0.00 0.00
Self Weight
9 2 0.00 0.00 0.00 -0.01 0.00 0.00 0.00
Support
10 Seismic (+x) 2 0.00 0.00 0.00 0.00 0.00 0.00 0.00
11 Seismic (-x) 2 0.00 -0.00 0.00 0.00 0.00 0.00 0.00
12 Seismic (+y) 2 0.00 0.00 0.00 0.00 0.00 0.00 0.00
13 Seismic (-y) 2 0.00 0.00 -0.00 0.00 0.00 0.00 0.00
14 Seismic (+z) 2 0.00 0.00 0.00 0.00 0.00 0.00 0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 6 / 22
Version: 1.10.0
No. Load Type Members Position [mm] Fx [kN] Fy [kN] Fz [kN] Mx [kNm] My [kNm] Mz [kNm]
15 Seismic (-z) 2 0.00 0.00 0.00 -0.00 0.00 0.00 0.00
Self Weight
16 1 1050.00 0.00 0.00 -0.00 0.00 0.00 0.00
Support
17 Seismic (+x) 1 1050.00 0.00 0.00 0.00 0.00 0.00 0.00
18 Seismic (-x) 1 1050.00 -0.00 0.00 0.00 0.00 0.00 0.00
19 Seismic (+y) 1 1050.00 0.00 0.00 0.00 0.00 0.00 0.00
20 Seismic (-y) 1 1050.00 0.00 -0.00 0.00 0.00 0.00 0.00
21 Seismic (+z) 1 1050.00 0.00 0.00 0.00 0.00 0.00 0.00
22 Seismic (-z) 1 1050.00 0.00 0.00 -0.00 0.00 0.00 0.00
Self Weight
23 2 1050.00 0.00 0.00 -0.00 0.00 0.00 0.00
Support
24 Seismic (+x) 2 1050.00 0.00 0.00 0.00 0.00 0.00 0.00
25 Seismic (-x) 2 1050.00 -0.00 0.00 0.00 0.00 0.00 0.00
26 Seismic (+y) 2 1050.00 0.00 0.00 0.00 0.00 0.00 0.00
27 Seismic (-y) 2 1050.00 0.00 -0.00 0.00 0.00 0.00 0.00
28 Seismic (+z) 2 1050.00 0.00 0.00 0.00 0.00 0.00 0.00
29 Seismic (-z) 2 1050.00 0.00 0.00 -0.00 0.00 0.00 0.00
Self Weight
30 1 750.00 0.00 0.00 -0.00 0.00 0.00 0.00
Support
31 Seismic (+x) 1 750.00 0.00 0.00 0.00 0.00 0.00 0.00
32 Seismic (-x) 1 750.00 -0.00 0.00 0.00 0.00 0.00 0.00
33 Seismic (+y) 1 750.00 0.00 0.00 0.00 0.00 0.00 0.00
34 Seismic (-y) 1 750.00 0.00 -0.00 0.00 0.00 0.00 0.00
35 Seismic (+z) 1 750.00 0.00 0.00 0.00 0.00 0.00 0.00
36 Seismic (-z) 1 750.00 0.00 0.00 -0.00 0.00 0.00 0.00
Self Weight
37 2 750.00 0.00 0.00 -0.00 0.00 0.00 0.00
Support
38 Seismic (+x) 2 750.00 0.00 0.00 0.00 0.00 0.00 0.00
39 Seismic (-x) 2 750.00 -0.00 0.00 0.00 0.00 0.00 0.00
40 Seismic (+y) 2 750.00 0.00 0.00 0.00 0.00 0.00 0.00
41 Seismic (-y) 2 750.00 0.00 -0.00 0.00 0.00 0.00 0.00
42 Seismic (+z) 2 750.00 0.00 0.00 0.00 0.00 0.00 0.00
43 Seismic (-z) 2 750.00 0.00 0.00 -0.00 0.00 0.00 0.00
65 Seismic (+x) 3 500.00 0.18 0.00 0.00 0.00 0.00 0.00
66 Seismic (-x) 3 500.00 -0.18 0.00 0.00 0.00 0.00 0.00
67 Seismic (+y) 3 500.00 0.00 0.18 0.00 0.00 0.00 0.00
68 Seismic (-y) 3 500.00 0.00 -0.18 0.00 0.00 0.00 0.00
69 Seismic (+z) 3 500.00 0.00 0.00 0.06 0.00 0.00 0.00
70 Seismic (-z) 3 500.00 0.00 0.00 -0.06 0.00 0.00 0.00
78 Seismic (+x) 4 500.00 0.18 0.00 0.00 0.00 0.00 0.00
79 Seismic (-x) 4 500.00 -0.18 0.00 0.00 0.00 0.00 0.00
80 Seismic (+y) 4 500.00 0.00 0.18 0.00 0.00 0.00 0.00
81 Seismic (-y) 4 500.00 0.00 -0.18 0.00 0.00 0.00 0.00
82 Seismic (+z) 4 500.00 0.00 0.00 0.06 0.00 0.00 0.00
83 Seismic (-z) 4 500.00 0.00 0.00 -0.06 0.00 0.00 0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 7 / 22
Version: 1.10.0
Start End
Mx My Mz
No. Load Type Members Position Position Fx [kN/m] Fy [kN/m] Fz [kN/m]
[kNm/m] [kNm/m] [kNm/m]
[mm] [mm]
44 Self Weight Support 1 0.00 1150.00 0.00 0.00 -0.02 0.00 0.00 0.00
45 Seismic (+x) 1 0.00 1150.00 0.01 0.00 0.00 0.00 0.00 0.00
46 Seismic (-x) 1 0.00 1150.00 -0.01 0.00 0.00 0.00 0.00 0.00
47 Seismic (+y) 1 0.00 1150.00 0.00 0.01 0.00 0.00 0.00 0.00
48 Seismic (-y) 1 0.00 1150.00 0.00 -0.01 0.00 0.00 0.00 0.00
49 Seismic (+z) 1 0.00 1150.00 0.00 0.00 0.00 0.00 0.00 0.00
50 Seismic (-z) 1 0.00 1150.00 0.00 0.00 -0.00 0.00 0.00 0.00
51 Self Weight Support 2 0.00 1150.00 0.00 0.00 -0.02 0.00 0.00 0.00
52 Seismic (+x) 2 0.00 1150.00 0.01 0.00 0.00 0.00 0.00 0.00
53 Seismic (-x) 2 0.00 1150.00 -0.01 0.00 0.00 0.00 0.00 0.00
54 Seismic (+y) 2 0.00 1150.00 0.00 0.01 0.00 0.00 0.00 0.00
55 Seismic (-y) 2 0.00 1150.00 0.00 -0.01 0.00 0.00 0.00 0.00
56 Seismic (+z) 2 0.00 1150.00 0.00 0.00 0.00 0.00 0.00 0.00
57 Seismic (-z) 2 0.00 1150.00 0.00 0.00 -0.00 0.00 0.00 0.00
58 Self Weight Support 3 0.00 1000.00 0.00 0.00 -0.02 0.00 0.00 0.00
59 Seismic (+x) 3 0.00 1000.00 0.01 0.00 0.00 0.00 0.00 0.00
60 Seismic (-x) 3 0.00 1000.00 -0.01 0.00 0.00 0.00 0.00 0.00
61 Seismic (+y) 3 0.00 1000.00 0.00 0.01 0.00 0.00 0.00 0.00
62 Seismic (-y) 3 0.00 1000.00 0.00 -0.01 0.00 0.00 0.00 0.00
63 Seismic (+z) 3 0.00 1000.00 0.00 0.00 0.00 0.00 0.00 0.00
64 Seismic (-z) 3 0.00 1000.00 0.00 0.00 -0.00 0.00 0.00 0.00
71 Self Weight Support 4 0.00 1000.00 0.00 0.00 -0.02 0.00 0.00 0.00
72 Seismic (+x) 4 0.00 1000.00 0.01 0.00 0.00 0.00 0.00 0.00
73 Seismic (-x) 4 0.00 1000.00 -0.01 0.00 0.00 0.00 0.00 0.00
74 Seismic (+y) 4 0.00 1000.00 0.00 0.01 0.00 0.00 0.00 0.00
75 Seismic (-y) 4 0.00 1000.00 0.00 -0.01 0.00 0.00 0.00 0.00
76 Seismic (+z) 4 0.00 1000.00 0.00 0.00 0.00 0.00 0.00 0.00
77 Seismic (-z) 4 0.00 1000.00 0.00 0.00 -0.00 0.00 0.00 0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 8 / 22
Version: 1.10.0
4 Load Combinations
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 9 / 22
Version: 1.10.0
5 Results
5.1 Calculation summary
5.1.1 Members
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 10 / 22
Version: 1.10.0
5.2 Members
5.2.2.1 Overview
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 11 / 22
Version: 1.10.0
Beam No. 1
Beam No. 2
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 12 / 22
Version: 1.10.0
Beam No. 3
Beam No. 4
Normal load
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 13 / 22
Version: 1.10.0
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 14 / 22
Version: 1.10.0
Torsion around X
Moment around Y
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 15 / 22
Version: 1.10.0
Moment around Z
Buckling ratio
5.2.4reference
The Deflection Analysis
length and/or limits for the deflection evaluation in this project was manually adjusted
by the user.
Criteria
☑ Maximum Allowable Deflection (Beam) L/200 (System Default)
☑ Maximum Allowable Deflection (Cantilever) L/150 (System Default)
- Maximum Deflection (Absolute) - -
☑ No Deflection checks calculated for 1.50mm (User Defined)
Overview
Results
Member Reference Max
Load Combination: Governing criteria Limit Utilization(%)
No. Length[mm] deflection[mm]
1 1.00 * LC1 + 1.00 * LC4 Relative (Beam) 1150.00 L/200 -0.00 0.00
2 1.00 * LC1 + 1.00 * LC4 Relative (Beam) 1150.00 L/200 -0.00 0.00
3 1.00 * LC1 + 1.00 * LC4 Relative (Beam) 1000.00 L/200 -0.00 0.00
4 1.00 * LC1 + 1.00 * LC4 Relative (Beam) 1000.00 L/200 -0.00 0.00
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 17 / 22
Version: 1.10.0
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 18 / 22
Version: 1.10.0
5.3.1 Overview
Governing Load
1.00 * LC1 + 1.00 * LC4 + 0.30 * LC14 + 1.00 * LC15 + 1.00 * LC18
Combination
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 19 / 22
Version: 1.10.0
5.4.1Overview
Governing Load
1.00 * LC1 + 1.00 * LC4 + 0.30 * LC13 + 1.00 * LC15 + 1.00 * LC18
Combination
Governing Load 1.00 * LC1 + 1.00 * LC4 + 0.30 * LC13 + 1.00 * LC16 + 1.00 *
Combination LC18
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 20 / 22
Version: 1.10.0
Resistance:
Governing Load 1.00 * LC1 + 1.00 * LC4 + 0.30 * LC14 + 1.00 * LC15 + 1.00 *
Combination LC18
Resistance:
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 21 / 22
Version: 1.10.0
Data and results must be checked for agreement with existing conditions and for plausibility. Changes may be necessary. Copyright (c) Hilti AG 2010,
FL-9494 Schaan 22 / 22