Professional Documents
Culture Documents
LD050R02EYE
LD050R02EYE
BULLETIN
affected models
May 2015
Models affected:
Warehouse:
MP20X (D843), MP18-22(L) (E842), MP20DL (A473)
MP20XV (A979, B979), MP20XD (B892)
MS10 / MS12 (C846), MS14 / MS16-IL (C852)
MS12X / MS15X-IL (C847)
MC10 / MC12 / MC15 (B860)
MO10L / MO20 / MO20P / MO25 / MO50T (D857, E857)
MO10E (C862), MO10 / MO10S ( B865)
MR10-MR25 (D849)
MTC10 / MTC12 / MTC15 (B868, B869)
Big Truck:
GDP80-120DB (C876, D876, E876, F876)
GDP130-160EB (C877, D877, E877, F877)
INTERCHANGEABILITY: N/A
PARTS STOCK: N/A
EFFECTIVE SERIAL NUMBER: N/A
We reserve the right to make changes in design or add improvements without incurring the obligation to make such changes in equipment
previously manufactured. The content of this publication is for information only and will not be considered for warranty reimbursement.
Reason: R02: adds models affected
Technical Description:
IFAK software version v5.3 is available to download from the “Software Resources” section of Axcess
Online.
1. Resolution of problems with automatic installation for future computer operating systems.
2. IFAK software must be installed to allow PC based application to communicate with the truck.
3. Updated model codes and affected units.
Please download the latest version of IFAK software from the “Software Resources” section of Axcess
Online. Refer to the Service Bulletins LD038 & LD025 for more details reference IFAK software.
Please contact your IT Department if there are any questions.
Additionally:
IFAK software is supported on the following Microsoft operating systems:
Windows XP, 32 bit
Windows Vista, 32 bit
Windows 7, 32 bit
Windows 7, 64 bit(1)
(1)
Note: Whilst the IFAK driver now supports 64 bit operation on Microsoft Windows 7. Other
Programs may run less effectively, or not at all.
Computer administrator rights will also be required to ensure the successful Uninstall and Install of
software programs and drivers.
Page 2 of 2 - LD050R02EYE.DOCX
We reserve the right to make changes in design or add improvements without incurring the obligation to make such changes in equipment
previously manufactured. The content of this publication is for information only and will not be considered for warranty reimbursement.