Professional Documents
Culture Documents
Pioneering design,
means taking the lead
Quantu
Mitutoyo is proud to have reached its leading position in the micrometer market through a spirit
of innovation, imagination and creating added value. The QuantuMike brand of micrometer,
inspired by this Mitutoyo Spirit, provides users with an excellent measuring experience with
higher speed, quality and stability than ever before owing to the integration of sophisticated
manufacturing and processing technologies.
293-141
MDE-50MJ
Measuring range: 25-50mm
293-142
MDE-75MJ
Measuring range: 50-75mm
293-140
MDE-25MJ
Measuring range: 0-25mm
n 1772
Speedy measurement
Faster measurement is achieved by using a finer thread which feeds the spindle by 2mm per revolution of the thimble instead of the standard
0.5mm. This increase of spindle feed has been made possible thanks to new high precision thread-cutting and test techniques. Trials show that
a reduction in positioning times of 60% and measuring times of 35%* can be obtained, compared with a conventional micrometer.
* According to Mitutoyo's comparison test data for measuring time on typical workpieces.
Spindle feed
1 revolution per revolution
of thimble
Conventional
model (MDC) 0.5mm
QuantuMike 2.0mm
Ratchet-induced
microvibrations along the
Ratchet on speeder spindle help ensure repeatable
Ratchet on thimble
measurements
Function lock
±1μm/±.00005” accuracy
(Except for 75-100mm (3-4”) type.)
mm inch/mm
n Common specifications
Functions Origin point setting (ABS length measurement system)
Zero setting (INC length measurement system)
Hold
Function lock
Auto power ON/OFF
Data output *1
Error alarm
Degree of protection IP65 (IEC60529)*2
Measuring force 7-12N
Power supply Button type silver oxide battery (SR44), 1 piece
Position detection system Electromagnetic rotary sensor *3
Battery life Approx. 1.2 years under normal conditions
Standard accessories Reference bar, 1 piece (except for 0-25mm (0-1”) models)
Button type silver oxide battery (SR44, No. 938882), 1 piece
Spanner (No. 301336), 1 piece
*1: Applicable only to 293-140/293-141/293-180/293-181/293-142/293-143/293-182/293-183
*2: This product is not waterproof. Rustproofing shall be applied after use.
*3: Patent pending (in Japan, USA, Europe, and China)
n Functions
Origin point setting Pressing the ORIGIN button resets the ABS origin at the current spindle position.
(ABS length measurement system)
Zero setting A brief press on the ZERO/ABS button sets display to zero at the current spindle position and switches to the
(INC length measurement system) incremental (INC) measuring mode. A longer press resets to the ABS measuring mode.
Hold Pressing the HOLD button freezes the current value in the display. This function is useful for preserving a measurement
in situations of poor visibility when the instrument must be moved away from the workpiece before the reading can be
recorded. A second press unfreezes the display ready for another measurement.
Function lock This function allows the ORIGIN (origin point setting) function and the ZERO (zero setting) function to be locked to
prevent these points being reset accidentally.
Auto power ON/OFF The reading on the LCD disappears after this instrument is idle for approx. 20 minutes, but the origin point is retained.
Turning the spindle causes the reading on the LCD to reappear.
Data output Models equipped with this function have an output port for transferring measurement data to a Statistical Process
Control (SPC) system.
Error alarm In case of an overflow on the LCD or a computing error, an error message appears on the LCD, and the measuring
function stops. This prevents an instrument from giving an erroneous reading. Also, when the battery voltage drops to
a certain level the low-battery-voltage alarm annunciator appears well before the micrometer becomes unusable.
ø19.3
b
Unit: mm
L a b
0-25mm (0-1”) 0 9 25
25-50mm (1-2”) 25 9.8 32
50-75mm (2-3”) 50 12.6 47
75-100mm (3-4”) 75 14 60
n Selective specifications
Order No. Measuring range Resolution Instrumental Flatness of Parallelism of Weight
error* measuring faces measuring faces
293-140 0-25mm 265g
1μm or less
293-141 25-50mm ±1μm 325g
Data output function equipped
293-142 50-75mm 465g
2μm or less
293-143 75-100mm ±2μm 620g
0.001mm
293-145 0-25mm 265g
1μm or less
Data output function 293-146 25-50mm ±1μm 325g
not equipped 193-147 50-75mm 465g
2μm or less
293-148 75-100mm ±2μm 620g
0.3μm or less
293-180 0-1”/ 0-25mm 265g
1μm or less
293-181 1-2”/25-50mm ±.00005”/±1µm 325g
Data output function equipped
293-182 2-3”/50-75mm 465g
2μm or less
293-183 3-4”/75-100mm .00005”/ ±.0001”/±2µm 620g
293-185 0-1”/ 0-25mm 0.001mm 265g
1μm or less
Data output function 293-186 1-2”/25-50mm ±.00005”/±1µm 325g
not equipped 293-187 2-3”/50-75mm 465g
2μm or less
293-188 3-4”/75-100mm ±.0001”/±2µm 620g
*Quantization error of ±1 count excluded
n Optional accessory
trim in
15mm
Mitutoyo (Malaysia) Sdn. Bhd. Mitutoyo (Thailand) Co., Ltd. PT. Mitutoyo Indonesia Mitutoyo Asia Pacific Pte. Ltd. Mitutoyo Asia Pacific Pte. Ltd.
Mah Sing Integrated Industrial Park, No. 76/3-5, Chaengwattana Road, Ruko Mall Bekasi Fajar Ho Chi Minh City Rep. Office Hanoi Representative Office
4, Jalan Utarid U5/14, Section U5, Anusaowaree, Bangkaen, Blok A6&A7, 248 Phan Xich Long Street, 6th Floor, Toyota My Dinh Building,
40150 Shah Alam, Selangor, Malaysia Bangkok 10220, Thailand MM2100 Industrial Town, Ward 2, Phu Nhuan District, 15 Pham Hung Road,
Tel: (60)3-7845 9318 Tel: (66)2-521 6130 Cikarang Barat, Ho Chi Minh City, Hanoi,
Fax: (60)3-7845 9346 Fax: (66)2-521 6136 Bekasi 17520, 70000 Vietnam 10000 Vietnam
E-mail: mmsb@mitutoyo.com.my E-mail: office@mitutoyo.co.th Indonesia Tel: (84)8-3517 4561 Tel: (84)4-3768 8963
Penang Branch Cholburi Branch Tel: (62)21-898 0841 Fax: (84)8-3517 4582 Fax: (84)4-3768 8960
Tel: (60)4-641 1998 Tel: (66)3-834 5783 Fax: (62)21-898 0842 E-mail: mitutoyo@mitutoyo.com.vn E-mail: mitutoyo-hn@mitutoyo.com.vn
Fax: (60)4-641 2998 Fax: (66)3-834 5788 E-mail: ptmi@mitutoyo.co.id
Johor Branch Amata Nakorn Branch
Tel: (60)7-352 1626 Tel: (66)3-846 8976
Fax: (60)7-352 1628 Fax: (66)3-846 8978