Professional Documents
Culture Documents
:
MMCE/ADEMRO/MSA-08
ENGINEERING (‘ADE’) MRO HANGAR AND NEW TAXIWAY AT
REV.01
PT39, LAPANGAN TERBANG ANTARABANGSA KUALA LUMPUR
(KLIA)
TITLE / DESCRIPTION : Material Submission Approval for Epoxy Cementitious Coating Triblock TMB from MAPEI
Malaysia Sdn Bhd
REFERENCE NO : MMCE/ADEMRO/MSA/ARC-0141
REVISION NO : 00
/
Local Product Import Product Country of Origin: _______________________
Certification
6
a. PPS/ CIDB Certificate / NA
b. SIRIM Certificate / NA
c. BOMBA Certificate / NA
d. Mill Certificate / NA
e. SPAN Certificate / NA
8 Warranty Specimen /
9 Sample Board /
17.04.2023
Signature: ____________________________ Date: ________________________
ATTACHMENT FOR MATERIAL SUBMISSION CHECKLIST/FORM
- POLYESTER URETHANE COATING (MAPECOAT CF-AP FROM MAPEI)
No DESCRIPTION REFERENCE
1. LOCATION: AFC DWG:
1. Entrance area at Hangar MMCE/ADEMRO/AFC/ARC/BD/100 Rev. 01
2. Loading and unloading area
2. BOQ: Schedule No. 3:
1. To supply skilled workers and equipment including Main Building Works (Item 7.17 & Item
substrate preparation to achieve minimum CSP 4-6 by 7.18)
shot-blasting/ scarifying method, to apply MOISTURE
BARRIER SYSTEM consist of MAPECOAT I 600 W, follow
with 2.0mm of TRIBLOCK TMB as moisture barrier
layer, follow with sealer coat of PRIMER SN an epoxy
resin-based primer finish with 2 coats of MAPEFLOOR I
302 SL two-component, solvent free, strong, has
excellent resistance to chemical and abrasion epoxy
resin coating system and finish with 2 layers of
MAPECOAT CF-AP, chemical resistant, UV stable PU
coating or other approved equivalent system; all
strictly in accordance to manufacturer's
recommendation & specification and laid by approved
specialist applicator. (Hangar B - Entrance area (Semi
Exposed Area) - 2000mm width
2. To supply skilled workers and equipment including
substrate preparation to achieve minimum CSP 4-6 by
shot-blasting/ scarifying method, to apply MOISTURE
BARRIER SYSTEM consist of MAPECOAT I 600 W, follow
with 2.0mm of TRIBLOCK TMB as moisture barrier
layer, follow with sealer coat of PRIMER SN an epoxy
resin-based primer and follow MAPEFLOOR I 302 SL
base coat and immediately broadcast with 4.0kg/m² of
QUARTZ 20/80 in excess then seal with MAPEFLOOR I
302 SL as anti-slip wearing layer and finally protect
with 2 coats of MAPECOAT CF-AP,chemical resistant,
UV stable PU coating or other approved equivalent
system; all strictly in accordance to manufacturer's
recommendation & specification and laid by approved
specialist applicator. (Loading and Unloading Area -
Exposed)
c k
o
EN 13813 EN 1504-2
ibl MB
r
T T IN COMPLIANCE WITH
EUROPEAN STANDARD
C60-F10
A9-A2fl-s1 MC-PR-IR
SURFACE PROTECTION
SYSTEMS FOR CONCRETE
Requirements according to
Test UNI EN 13813 for cementitious Performance
Performance characteristic
method synthetic resin screedsmodified of product
with reactive resins of CT type
24 h 25
C 5 ÷ C 80
Compressive strength (N/mm²): EN 13892-2 7d 55
(28 days)
28 d 68
24 h 7
F 1 ÷ F50
Flexural strength (N/mm²): EN 13892-2 7d 10
(28 days)
28 d 12
value declared by
Reaction to fire: EN 13501-1 A2fl-s1
manufacturer
FINAL PERFORMANCE (thickness 3 mm)
Requirements according
to EN 1504-2 Performance
Performance characteristic Test method
(principles MC, PR of product
and IR - coating)
Impact resistance (N·m): EN 6272-1 class declared by manufacturer Class III: > 20
W < 0.1
Impermeability expressed as
Class III: (low permeability
coefficient of permeability to EN 1062-3 W < 0.1
to water) according to
free water (kg/m²·h0.5):
EN 1062-1
o
bl MB
When applying the product, we recommend information must, in every case, be taken as
ri
T T
the use of protective gloves and goggles and
to take the usual precautions for handling
chemical products.
merely indicative and subject to confirmation
after long-term practical application: for this
reason, anyone who intends to use the
If the product comes into contact with the product must ensure beforehand that it is
eyes or skin, wash immediately with plenty of suitable for the envisaged application: in
MY (11/2013)
clean water and seek medical attention. every case, the user alone is fully responsible
Triblock TMB components A and B are also for any consequences deriving from the use
hazardous for aquatic life. Do not dispose of
of the product.
these products in the environment.For further
and complete information about the safe use
Please refer to the current version of the
of our product please refer to our latest
Technical Data Sheet, available from our
version of the Material Safety Data Sheet.
website www.mapei.com
PRODUCT FOR PROFESSIONAL USE.
All relevant references
WARNING for the product are available
Although the technical details and upon request and from
recommendations contained in this product www.mapei.com
data sheet correspond to the best of our
1: Identification
Product identifier
Mixture identification:
Trade name: TRIBLOCK TMB / A
Trade code: 9013553
Recommended use of the chemical and restrictions on use
Recommended use: Epoxy resins
Uses advised against: N.A.
Supplier's details
Company: MAPEI MALAYSIA Sdn Bhd
Lot 754, Lengkok Emas 1, Kawasan Perindustrian Nilai, 71800 Negeri Sembilan, Malaysia
sicurezza@mapei.it - www.mapei.com.my
Emergency phone number
999
2: Hazard identification
Warning
Hazard statements
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
Precautionary statements
P261 Avoid breathing mist/vapours/spray.
P264 Wash hands thoroughly after handling.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352 IF ON SKIN: Wash with plenty of soap and water.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy
to do. Continue rinsing.
3: Composition/information on ingredients
Substances
N.A.
Mixtures
Mixture identification: TRIBLOCK TMB / A
Hazardous components within the meaning of the GHS regulation and related classification:
Qty Name Ident. Numb. Classification Registration Number
≥25 - <50 CAS:25068-38-6 Eye Irrit. 2, H319; Skin Irrit. 2, 01-2119456619-26-xxxx
% EC:500-033-5 H315; Skin Sens. 1, H317; Aquatic
Index:603-074- Chronic 2, H411
00-8
≥5 - <10 Formaldehyde, oligomeric reaction CAS:9003-36-5 Skin Irrit. 2, H315; Skin Sens. 1, 01-2119454392-40-XXXX
% products with 1-chloro-2,3- EC:500-006-8 H317; Aquatic Chronic 2, H411
epoxypropane and phenol
≥5 - <10 oxirane, mono[(C12-14- CAS:68609-97-2 Skin Irrit. 2, H315; Skin Sens. 1, 01-2119485289-22-XXXX
% alkyloxy)methyl] derivs. EC:271-846-8 H317
Index:603-103-
00-4
4: First-aid measures
Description of necessary first-aid measures
In case of skin contact:
Immediately take off all contaminated clothing.
Remove contaminated clothing immediately and dispose of safely.
After contact with skin, wash immediately with soap and plenty of water.
In case of eyes contact:
After contact with the eyes, rinse with water with the eyelids open for a sufficient length of time, then consult an opthalmologist
immediately.
Protect uninjured eye.
In case of Ingestion:
Do not induce vomiting, get medical attention showing the SDS and the hazard label.
In case of Inhalation:
Remove casualty to fresh air and keep warm and at rest.
Most important symptoms/effects, acute and delayed
Eye irritation
Eye damages
Skin Irritation
Erythema
Indication of immediate medical attention and special treatment needed, if necessary
In case of accident or unwellness, seek medical advice immediately (show directions for use or safety data sheet if possible).
Treatment:
(see paragraph 4.1)
5: Fire-fighting measures
Extinguishing media
Suitable extinguishing media:
Water.
Carbon dioxide (CO2).
Unsuitable extinguishing media:
None in particular.
Special hazards arising from the chemical
Do not inhale explosion and combustion gases.
Burning produces heavy smoke.
Print date 16/01/2023 Production Name TRIBLOCK TMB / A Page n. 2 of 8
Burning produces heavy smoke.
Hazardous combustion products: N.A.
Explosive properties: ==
Oxidizing properties: N.A.
Special protective actions for fire-fighters
Use suitable breathing apparatus.
Collect contaminated fire extinguishing water separately. This must not be discharged into drains.
Move undamaged containers from immediate hazard area if it can be done safely.
0,0627 Freshwater
mg/kg sediments
66,77 Freshwater
mg/kg sediments
80,12 Soil
mg/kg
10 mg/l Microorganisms in
sewage treatments
Formaldehyde, oligomeric a) acute toxicity LD50 Oral Rat > 5000,00000 mg/kg
reaction products with 1-
chloro-2,3-epoxypropane
and phenol
i) STOT-repeated exposure
j) aspiration hazard
Component Persitence/Degradability:
oxirane, mono[(C12-14- Readily biodegradable
alkyloxy)methyl] derivs.
Bioaccumulative potential
Component Bioaccumulation
oxirane, mono[(C12-14- Not bioaccumulative
alkyloxy)methyl] derivs.
Mobility in soil
N.A.
Other adverse effects
IATA-Erg: 9L
IATA-Special Provisions: A97 A158 A197
Sea (IMDG):
IMDG-Packing group: III
IMDG-Stowage Code: Category A
IMDG-Stowage Note: -
IMDG-Subsidiary hazards: -
1: Identification
Product identifier
Mixture identification:
Trade name: TRIBLOCK TMB /B
Trade code: 9013554
Recommended use of the chemical and restrictions on use
Recommended use: Hardener for epoxy products
Uses advised against: Data not available.
Supplier's details
Company: MAPEI MALAYSIA Sdn Bhd
Lot 754, Lengkok Emas 1, Kawasan Perindustrian Nilai, 71800 Negeri Sembilan, Malaysia
T. +606 799 8028 (Mon-Fri 8.30am to 5.30pm) - F. +606 799 8191
sicurezza@mapei.it - www.mapei.com.my
Emergency phone number
999
2: Hazard identification
Danger
Hazard statements
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H411 Toxic to aquatic life with long lasting effects.
Precautionary statements
P261 Avoid breathing mist/vapours/spray.
P264 Wash hands thoroughly after handling.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352 IF ON SKIN: Wash with plenty of soap and water.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy
to do. Continue rinsing.
3: Composition/information on ingredients
Substances
N.A.
Mixtures
Mixture identification: TRIBLOCK TMB /B
Hazardous components within the meaning of the GHS regulation and related classification:
Qty Name Ident. Numb. Classification Registration Number
≥10 - <20 aliphatic polyamine Aquatic Acute 1, H400; Aquatic
% Chronic 1, H410
≥2.5 - <5 2-Propenenitrile, reaction products CAS:90530-15-7 Skin Corr. 1B, H314; Skin Sens. 1, 01-2120094715-47-XXXX
% with 3-amino 1,5,5- EC:292-053-3 H317
trimethylcyclohexanemethanamine
≥0.49 - <1 m-xylylenediamine CAS:1477-55-0 Acute Tox. 4, H332; Acute Tox. 4, 01-2119480150-50
% EC:216-032-5 H302; Skin Corr. 1B, H314; Skin
Sens. 1, H317; Aquatic Chronic 3,
H412
4: First-aid measures
Description of necessary first-aid measures
In case of skin contact:
Immediately take off all contaminated clothing.
OBTAIN IMMEDIATE MEDICAL ATTENTION.
Remove contaminated clothing immediately and dispose of safely.
After contact with skin, wash immediately with soap and plenty of water.
In case of eyes contact:
After contact with the eyes, rinse with water with the eyelids open for a sufficient length of time, then consult an opthalmologist
immediately.
Protect uninjured eye.
In case of Ingestion:
Do not induce vomiting, get medical attention showing the SDS and the hazard label.
In case of Inhalation:
Remove casualty to fresh air and keep warm and at rest.
Most important symptoms/effects, acute and delayed
Eye irritation
Eye damages
Skin Irritation
Erythema
Indication of immediate medical attention and special treatment needed, if necessary
In case of accident or unwellness, seek medical advice immediately (show directions for use or safety data sheet if possible).
Treatment:
(see paragraph 4.1)
5: Fire-fighting measures
Extinguishing media
Suitable extinguishing media:
Water.
Carbon dioxide (CO2).
Unsuitable extinguishing media:
None in particular.
Special hazards arising from the chemical
Do not inhale explosion and combustion gases.
Burning produces heavy smoke.
Hazardous combustion products: N.A.
Print date 02/02/2023 Production Name TRIBLOCK TMB /B Page n. 2 of 8
Hazardous combustion products: N.A.
Explosive properties: ==
Oxidizing properties: N.A.
Special protective actions for fire-fighters
Use suitable breathing apparatus.
Collect contaminated fire extinguishing water separately. This must not be discharged into drains.
Move undamaged containers from immediate hazard area if it can be done safely.
Exposure Route: Human Inhalation; Exposure Frequency: Long Term, systemic effects
Worker Industry: 1.2 mg/m3
Exposure Route: Human Inhalation; Exposure Frequency: Long Term, local effects
Worker Industry: 0.2 mg/m3
b) Aquatic chronic toxicity : EC50 Crustacea Daphnia magna > 100 mg/L 48h
OECD Guideline 202 - Static test
m-xylylenediamine CAS: 1477-55-0 a) Aquatic acute toxicity : EC50 Algae = 20 mg/L 72h
- EINECS: 216-
032-5
N.A.
Bioaccumulative potential
N.A.
Mobility in soil
N.A.
Other adverse effects
IATA-Erg: 9L
IATA-Special Provisions: A97 A158 A197
Sea (IMDG):
IMDG-Packing group: III
IMDG-Stowage Code: Category A
IMDG-Stowage Note: -
IMDG-Subsidiary hazards: -
1: Identification
Product identifier
Mixture identification:
Trade name: TRIBLOCK TMB part C
Trade code: 9013555
Recommended use of the chemical and restrictions on use
Recommended use: Cement based levelling mortar
Uses advised against: Data not available
Supplier's details
Company: MAPEI MALAYSIA Sdn Bhd
Lot 754, Lengkok Emas 1, Kawasan Perindustrian Nilai, 71800 Negeri Sembilan, Malaysia
sicurezza@mapei.it - www.mapei.com.my
Emergency phone number
999
2: Hazard identification
Danger
Hazard statements:
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H335 May cause respiratory irritation.
Precautionary statements:
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P264 Wash ... Thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352 IF ON SKIN: Wash with plenty of soap and water.
P304+P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy
to do. Continue rinsing.
3: Composition/information on ingredients
Substances
Not available
Mixtures
Mixture identification: TRIBLOCK TMB part C
Hazardous components within the meaning of the GHS regulation and related classification:
Concentration Name Ident. Numb. Classification Registration Number
(% w/w)
≥25 - <50 % portland cement, Cr(VI) < 2 ppm CAS:65997-15-1 Skin Irrit. 2, H315; Skin Sens. 1,
EC:266-043-4 H317; Eye Dam. 1, H318; STOT
SE 3, H335
4: First-aid measures
Description of necessary first-aid measures
In case of skin contact:
Immediately take off all contaminated clothing.
OBTAIN IMMEDIATE MEDICAL ATTENTION.
Remove contaminated clothing immediately and dispose of safely.
After contact with skin, wash immediately with soap and plenty of water.
In case of eyes contact:
After contact with the eyes, rinse with water with the eyelids open for a sufficient length of time, then consult an opthalmologist
immediately.
Protect uninjured eye.
In case of Ingestion:
Do not induce vomiting, get medical attention showing the SDS and the hazard label.
In case of Inhalation:
In case of inhalation, consult a doctor immediately and show him packing or label.
Most important symptoms/effects, acute and delayed
Eye irritation
Eye damages
Skin Irritation
Erythema
Indication of immediate medical attention and special treatment needed, if necessary
In case of accident or unwellness, seek medical advice immediately (show directions for use or safety data sheet if possible).
Treatment:
(see paragraph 4.1)
5: Fire-fighting measures
Extinguishing media
Suitable extinguishing media:
Water.
Carbon dioxide (CO2).
Print date 29/03/2022 Production Name TRIBLOCK TMB part C Page n. 2 of 7
Carbon dioxide (CO2).
Unsuitable extinguishing media:
None in particular.
Special hazards arising from the chemical
Do not inhale explosion and combustion gases.
Burning produces heavy smoke.
Hazardous combustion products: Not available
Explosive properties: ==
Oxidizing properties: Not available
Special protective actions for fire-fighters
Use suitable breathing apparatus.
Collect contaminated fire extinguishing water separately. This must not be discharged into drains.
Move undamaged containers from immediate hazard area if it can be done safely.
OSHA 15
OSHA 5
ACGIH 1 A4 - Not Classifiable as a
Human
Carcinogen;pulmonary
function;respiratory
symptoms;asthma
If not differently specified, the information required in the regulation and listed below must be considered as N.A.
a) acute toxicity
i) STOT-repeated exposure
j) aspiration hazard
Not available
Bioaccumulative potential
Not available
Mobility in soil
Not available
Other adverse effects
Warranty Ref No :
PRODUCT WARRANTY
This warranty is issued to (“The Beneficiary”).
“Project” ASIA DIGITAL ENGINEERING (ADE) MRO HANGAR AND NEW TAXIWAY AT PT39, LAPANGAN TERBANG
ANTARABANGSA KUALA LUMPUR (KLIA)
“Applicator”
“Client”
Warranty Period
Commencement Date
Subject to the terms and conditions of this warranty, MAPEI MALAYSIA SDN BHD (“MAPEI”) warrants that the
Product/s listed above are free from manufacturing defects and meet/s the properties as specified in the
product data sheet/s current at the time of delivery, provided the Product/s is/are used for the application/s as
described in the said data sheets.
________________________
Seow Aik Guan
Managing Director
Date :
(For the terms & conditions of this warranty, please see over leaf.)
2. MAPEI assumes no responsibility for any failure resulting from the following causes:
a) non-compliance with guidelines regarding application and storage of the MAPEI Products and not using
the Product/s within its specified shelf life;
b) application under ambient conditions which are not in accordance with product data sheet advice
including weather, temperature, humidity and dew point limitations, as well as incorrect application
methods including surface preparation, mixing, curing, etc., by a third party applicator, whether or not in
the presence of Mapei personnel;
c) alterations or additions or repairs to the said Mapei Products;
d) structural defects, substrate movement and/or substrate quality not meeting the requirements as set
forth by Mapei, including but not limited to disintegration of the substrate, faulty design or quality of
the construction on which the Mapei Products are applied;
e) leakages from expansion joints unless these joints are waterproofed with Mapeband TPE;
f) external factors such as acts by third parties or acts of nature such as flood, fire, lightning, earthquake,
etc., or structural settlement or movement;
g) exposure of the Mapei Products to contact with incompatible substances or materials;
h) wear and tear, including aesthetical changes in the Mapei Product/s;
i) placement, erection and or construction of any form of installation onto or through the Product/s after
the application of the Product/s is completed;
j) poor or negligent maintenance and/or housekeeping;
k) accidental or intentional misuse and/or abuse of the installations for the products described in this
warranty;
l) changes to intended service conditions.
3. Colour or shade variations of the Product/s are not covered under this warranty.
4. There are no warranties, conditions, terms or representations expressed or implied offered by MAPEI
covering the said Product/s which are binding on the parties other than the present warranty contained and
described herein.
5. This Warranty represents the full and complete agreement between the Beneficiary and Mapei in respect of
Mapei’s liabilities arising out of defects in the Product/s for which Mapei is responsible, and over-rides any
other provision in any other agreement, oral or written, between the Beneficiary and Mapei.
6. This warranty does not cover any loss of income, loss of actual or anticipated profits, loss of business, loss of
contracts, loss of goodwill or reputation or any consequential loss of any kind howsoever arising.
7. This warranty becomes null, void and of no effect if MAPEI is not notified in writing within 3 (three) working
days of the discovery of any alleged manufacturing defects and/or if Mapei is not provided reasonable access
to inspect the alleged defects. The notification to Mapei shall include:
a. location/s of Mapei Product/s;
b. type/s of failure;
c. batch number/s of the Mapei Product/s;
d. a copy of this product warranty.
8. No repair measures shall be carried out without the express consent and prior written approval from MAPEI
and all reasonable measures to limit existing damage or prevent imminent damage shall have been taken.
9. This Warranty shall apply only to Mapei Product/s applied for the Project.
10. This warranty shall only become effective upon MAPEI having received full payment for all the Products
covered under this warranty.
11. This Warranty is governed by the material laws of Malaysia and the parties submit to the exclusive
jurisdiction of the Malaysian courts to resolve any disputes arising out of or in connection with this Warranty.