Professional Documents
Culture Documents
Both are
types of semiconductor devices, both are used to control currents, both have a ‘gate’, etc. However, there are a
few differences including their applications and their advantages and disadvantages.
To help you understand the similarities and differences between them, we’ve created a helpful guide covering
IGBT Vs Thyristors. Let’s get stuck in!
The gate, located at the inner P-type semiconductor layer is the part of the device that controls the flow of
current between the anode and the cathode. During operation, the thyristor only acts when a pulse is applied
to the gate.
Essentially, the primary purpose of a thyristor is to act as a switch – controlling electric power and alternating
currents.
Once the device is triggered by a pulse, the thyristor shifts into forward conducting mode. It will remain in this
conducting state until the forward current becomes less than the threshold ‘holding current’.
The forward blocking state occurs when the NP junction blocks the flow of positive current from moving from
the anode to the cathode. Whereas the reverse blocking state is the opposite; in this mode the PN junctions
block the flow of negative current.
Originally introduced to the market in the 1980s, IGBTs consist of three terminals:
• Emitter
• Collector
• Gate
With the gate controlling the device and the emitter and collector linked to the current and the conductance
path.
Taking the high-speed switching abilities of MOSFETs and the high voltage and current handling capabilities of
Bipolar Transistors, IGBTs are capable of handling large currents with a very low gate current drive.
Unlike Thyristors, IGBTs are unidirectional, which means they can only switch current in the forward direction.
They also differ from thyristors in terms of power supply, as IGBTs require a continuous supply of gate voltage
to run – although it is worth mentioning that only a small voltage is required for the gate to maintain
conduction throughout the device.
Uses of Thyristors
Thyristors have a wide range of applications and are used across a variety of industries. Generally, thyristors are
categorised into three varieties; thyristors with turn-on capabilities, thyristors with turn-off capabilities, and bi-
directional control thyristors.
• Silicone Controlled Rectifiers (SCRs) – used in DC motor drives, AC/DC static switches, switching and
inverting circuits
• Reverse Conducting Thyristors (RCTs) – used in inverters and DC motor drives for high-powered
machinery
• Light Activated Silicone Controlled Rectifiers (LASCRs) – used in reactive power compensators, high-
powered pulse generators and transmission equipment
• Gate Turn-off Thyristor (GTOs) – used in DC and AC motor drives, AC Power stabilisers, and high-
powered inverters
• MOS Turn-off Thyristor (MTOs) – predominantly used in high voltage applications of up to 20 MVA,
motor drives, Voltage Inverters, and flexible AC line transmissions
• Emitter Turn-off Thyristors (ETOs) – Voltage inverters for high powered applications, Static Synchronous
Compensators, and Flexible AC line Transmissions.
• Triode for Alternating Current (TRIAC) – Low-power TRIACs are commonly used as speed controls for
fans and other electric motors, light dimmers, and in computerised control circuits of household
appliances
• Diode for Alternating Current (DIAC) – commonly used in light bulb dimmers
• Silicone Diode for Alternating Current (SIDAC) – used in a range of special-purpose devices and
relaxation oscillators
Uses of IGBTs
Predominantly IGBTs are used as switching devices for applications with high voltages and moderate speeds,
thanks to their fast switching abilities and high-efficiency rates. They’re used in the same situations that Bipolar
Transistors are favoured for as they have similar current and voltage ratings; however, because of their isolated
gate, they require less drive power!
• Frequency Converters
• DC-AC inverters
• Switch-mode power supplies (SMPS)
• Variable speed control
• Pulse-width modulation (PWM)
• AC & DC motor drives
• Traction Motor Control
• Driving inductive loads
Benefits of Thyristors
Thyristors offer a wide range of advantages, making them an incredibly popular choice for a number of
applications. These advantages include:
• High reliability
• Easy to maintain
• Ability to switch currents in microseconds
• Capable of working with high voltages
• Ability to control direct current devices
• Fast activation
• Affordable
• Easy to use
• Small dimensions
Benefits of IGBTs
IGBT modules have a number of unique advantages over other types of transistors, including: