Professional Documents
Culture Documents
RS
the same length and are pinned at both ends.
[20 Marks]
NE
1.(b)(ii) A hydraulic structure is sized for a 50 year recurrence interval design
discharge. What is the risk that the flow capacity will be exceeded
during any future 20 year period? What is the probability that the 50
year recurrence interval peak flow rate will be exceeded in the next
50 years? AR [10 Marks]
1.(c) State the Muller-Breslau principle. Hence draw influence line for
LE
moment at D in the beam shown in Figure.
1
A D C
B
ER
[15 Marks]
2.(a) Analyse the truss shown in the figure below and list out the forces
in the members.
MA
2000 N 1000 N
A B C
2.4 m
E
D
1.8 m 3.6 m 1.8 m
[25 Marks]
Regd. office : Basement, F-127, Katwaria Sarai, New Delhi-110016 Phone : 011-45532062
Mob. : 9717831666 E-mail: info@masterlearners.in Web. : www.masterlearners.in
CE SSC JE Mains Examination Test-03 | 1st January 2023 (3)
RS
60mm
20mm
NE
100m
20mm
20mm
100mm
AR [20 Marks]
3.(a) Design the length and spacing of tie bars given that the pavement
TE
[15 Marks]
MA
RS
40 2.505
50 2.38
100 1.83
NE
200 1.28
400 0.73
[15 Marks]
3.(d)
AR
A horizontal stratified deposit consists of four layers each uniform
in itself. The permeabilities of the layers are 7.5 × 10–4 cm/sec, 49
× 10–4 cm/sec, 13 × 10–4 cm/sec and 17 × 10–4 cm/sec and their
thickness are 5 m, 4 m, 17 m and 6 m respectively. Find the effective
LE
average permeabilities of the deposit in horizontal and vertical
directions.
[15 Marks]
ER
4.(a) A3-hinged parabolic arch of 16m span has its abutments A and B at
a depth of 4m and 8m respectively below the crown C. It is loaded
as shown in figure. Determine the horizontal thrust and the vertical
reactions at the supports.
ST
30 kN/m
C 300 kN
4m 7m
MA
A
4m
B
6m 10 m
[20 Marks]
RS
x x 400
NE
20
4.(c)(i)
200
AR
What is hydrograph? Explain different types of hydrograph depending
[15 Marks]
LE
upon unit of time involved and their corresponding applications.
[10 Marks]
[15 Marks]
TE
5.(a) The specific gravities and weight proportions for aggregate and
bitumen are as under for the preparation of Marshall mix design.
The volume and weight of one Marshall specimen was found to be
475 cc and 1100 gm. Assuming absorption of bitumen in aggregate
S
Item A _1 A _ 2 A _ 3 A _ 4 B
Wt gm 825 1200 325 150 100
Sp. Gr 2.63 2.51 2.46 2.43 1.05
[15 Marks]
RS
50mm 50mm
25mm
50mm
NE
100mm
125mm
[15 Marks]
5.(c)
explain.
AR
What is the importance of drainage in highway ? Briefly
[15 Marks]
LE
5.(d) Describe briefly the following in a well with neat sketches:
(i) Cone of depression
(ii) Area of influence
ER
(iii) Drawdown
(iv) Radius of influence
[15 Marks]
ST
A 1.360m B 1.585m
B 1.335 m A 0.890m
RS
6.(c)(i) Explain the concept of global positioning system.
[10 Marks]
NE
6.(c)(ii) Define remote sensing and briefly explain the principle of remote
sensing. Explain the terms ‘passive remote sensng’ and ‘active remote
sensing.’
[10 Marks]
6.(d) AR
What do you understand by “index properties of soil” ? Explain and
list the properties under different categories.
[10 Marks]
LE
R
S TE
MA
Regd. office : Basement, F-127, Katwaria Sarai, New Delhi-110016 Phone : 011-45532062
Mob. : 9717831666 E-mail: info@masterlearners.in Web. : www.masterlearners.in