Professional Documents
Culture Documents
541 Series 2 Teste Hélice - 083140
541 Series 2 Teste Hélice - 083140
Welcome: u060ah1
Product: TRACK FELLER BUNCHER
Model: 541 2 TRACK FELLER BUNCHER F7D
Configuration: 541 Series 2 Track Feller Buncher F7D00001-UP (MACHINE)
POWERED BY C9 Engine
i04405891
To prevent injury or death, make sure that the area around the machine
is clear of personnel and obstructions before operating the machine.
Note: Use the information in the reference to prepare the machine for this test. Also, use the
information in the reference to relieve any system pressure that may be present in the hydraulic
system.
Reference: For the correct procedure to prepare the machine for this test, refer to Testing and
Adjusting, "Machine Preparation for Troubleshooting" for the machine that is being serviced.
Illustration 3 g01162814
Hydraulic lockout control
5. While the fan blades are in the neutral position or the suction position, depress reversing fan
switch (1).
Illustration 5 g01070478
Location of the pilot manifold
Illustration 6 g02598278
The fan solenoids are located on the pilot manifold.
(2) Fan control solenoid valve
(3) Reversing fan control
(4) Fan control solenoid valve
6. Fan control solenoid valve (2) energizes. Fan control solenoid valve (4) will de-energize.
7. The fan blades change pitch in order to purge the radiator. The air flow will flow out of the
radiator. This process will remove debris from the radiator.
8. Release reversing fan switch (1). Fan control solenoid valve (2) will de-energize. Fan
control solenoid valve (4) will energize. The blades will return to the original position.
Copyright 1993 - 2020 Caterpillar Inc. Tue Jan 21 2020 23:08:21 GMT-0300 (Hora oficial do Brasil)
All Rights Reserved.
u060ah1
Private Network For SIS Licensees.