Professional Documents
Culture Documents
Livelihood Education
Module 2
Request Appropriate Electrical Supplies,
Materials, and Tools for a Specific Job
TLE_IAEI7/8UT-0a
Technology and Livelihood Education – Grade 7/8
Alternative Delivery Mode
Module 2- Request Appropriate Supplies, Materials, and Tools for a Specific
Job
First Edition 2020
Republic Act 8293, section 176 states that: No copyright shall subsist in any
work of the Government of the Philippines. However, prior approval of the
government agency or office wherein the work is created shall be necessary
for exploitation of such work for profit. Such agency or office may, among
other things, impose as a condition the payment of royalties.
Glenda S. Constantino
Project Development Officer II
Joannarie C. Garcia
Librarian II
As a facilitator, you are expected to orient the learners on how to use this module. You also
need to keep track of the learners’ progress while allowing them to manage their own learning.
Furthermore, you are expected to encourage and assist the learners as they do the tasks
included in the module.
1
At the end of this module you will also find:
References This is a list of all sources used in developing this module.
The following are some reminders in using this module:
1. Use the module with care. Do not put unnecessary mark/s on any part of the module.
Use a separate sheet of paper in answering the exercises.
2. Don’t forget to answer What I Know before moving on to the other activities included
in the module.
3. Read the instruction carefully before doing each task.
4. Observe honesty and integrity in doing the tasks and checking your answers.
5. Finish the task at hand before proceeding to the next.
6. Return this module to your teacher/facilitator once you are through with it.
If you encounter any difficulty in answering the tasks in this module, do not hesitate to consult
your teacher or facilitator. Always bear in mind that you are not alone.
We hope that through this material, you will experience meaningful learning and gain deep
understanding of the relevant competencies. You can do it!
2
What I Need to Know
This module provides discussion and series of activities that will give you a
deep understanding about types of forms in electrical work
.
At the end of this module you are expected to:
What I Know
Hello! I hope that you are energized today. Make yourself physically and mentally
ready for our new lesson. But before that, let us check your prior knowledge about our new
lesson. Feel free to answer the following questions.
A, Directions: Match Column A descriptions with Column B types of forms. Write the correct
letter on your answer sheet.
Column A Column B
_____1. A document generated by a user a. Inventory of Materials Form
department or storeroom-personnel to
notify the purchasing department of
items it needs to order, their quantity,
and the time frame.
______2. The raw materials, work-in-process b. Requisition Slip Form
goods and completely finished goods
that are considered to be the portion of
a business's assets that are ready or
will be ready for sale.
______3. A form use to request for tools and c. Job Order/ Work Order Form
equipment to be used for a particular
job.
3
B. Directions: Read and analyze the following questions. Choose your answer in the box
below. Write your answer on your answer sheet.
___________6. What form will I prepare when I am about to borrow Pliers from the store?
___________7. If I’m going to buy hammers, what form should I make?
___________8. What form should I use if I am to report last materials inside the stockroom?
___________9. What form will I create when I’m about to buy a materials that we will use
in one month?
___________10. What form should I prepare if I’m going to buy screwdrivers?
What’s In
Welcome!. Before we proceed, let us try to recall the previous lesson. Can you apply
what you have learned in the previous module? Give 5 Electrical Tools and 5 Electrical
Materials. Write it on your answer sheet.
5 Electrical Tools 5 Electrical Materials
1. 1.
2. 2.
3. 3.
4. 4.
5. 5.
Good job! The result of your activity showed how to really mastered the previous lesson.
Now, be ready for the new challenges that this module will give you. Good luck!
4
What’s New
To give you an idea of the new lesson, answer this activity. Draw 😊 if the statement
is correct, and ☹if the statement is incorrect.
________1. Different forms used in electrical work is necessary in order to acquire right,
complete and accurate number of materials and tools needed in a specific
electrical job.
________2. Job order is also called purchase receipt.
________3. Inventory represents one of the most important assets that most
businesses possess.
________4. There are 10 types of forms in Electrical work.
________5. Borrower’s form is used to request for tools and equipment needed for a
particular job.
What is It
DIFFERENT TYPES OF FORMS
Different forms used in electrical work is necessary inorder to acquire right, complete,
and accurate number of materials and tools needed in a specific electrical job. Here are
samples of different forms used in electrical work.
Note: lifted from HECTOR M. VALLARTA Electrical Installation Maintenance
K- 12- Technology and Livelihood Education
1. Purchase requisition
2. Inventory
These are raw materials, work-in-process goods and finished goods that are the portion
of a business's assets that are ready or will be ready for sale. Inventory represents one of the
most important assets that most businesses possess, because the turnover of inventory
represents one of the primary sources of revenue generation and subsequent earnings for
the company's shareholders/owners.
5
4. Borrower’s form
It is used to request for tools and equipment needed for a particular job. It indicates the
department that the borrower is connected, the date, the job that is to be done, who is the
person to approve the request, when it was returned and if it was in good condition.
shorturl.at/fhsS9
6
After completing the lesson about Use of forms in Requesting for Electrical tools, supplies
and materials for a specific job, let’s check the level of your understanding by answering series
of activities and assessments.
What’s More
Independent Activity 1
Directions: Identify the following types of forms in an Electrical work. Write it on your answer
sheet.
________1. These are raw materials, work-in-process goods and finished goods that are
considered to be the portion of a business's assets that are ready or will be ready
for sale.
________2. This form is a written instruction to perform a work according to specified
requirements, within specified timeframe and cost estimates
________3. It is a form used to request for tools and equipment needed for a particular job.
________4. A document generated by user department or storeroom personnel to notify the
purchasing department items it needs to order, their quantity, and the timeframe.
Independent Assessment 1
Directions: To form a word, arrange the following jumbled letters inside the box. Write
it your answer.
1. Vneyitnor orfm
2. Obj rdero mrfo
3. Rrweoorsb rofm
4. Secharup itonisquier
7
Independent Activity 2
Directions: Accomplish the table. Describe the following forms. Write it on your answer
sheets.
2. Inventory
4. Purchase requisition
Independent Activity 3
Direction: Fill up the given Purchase requisition form and Inventory form. Do it on your
answer sheets. (see rubrics in appendix)
shorturl.at/izMP9
8
shorturl.at/dsO14
1. What form will I prepare if I’m about to order a roll of Electrical wire?
2. If I am ask to report the remaining materials available in the stockroom what form
should I accomplish?
4. What form will I create when I’m about to buy a materials that we will use for
1 week?
9
What I Can Do
You are an awesome because you’ve come this far. In this stage, you will apply what
you’ve learned about the lesson.
Directions: Make a borrower’s form. Do it in your answer sheets (see rubrics in appendix)
10
Assessment
You are smart student for reaching this stage! Now, let us test your learning for the
whole module. Answer this post assessment.
Direction: Read the statements carefully then choose from the word pool the form best
described. Write the correct letter on your answer sheet.
Additional Activity
Direction: In five sentences, explain the Importance of different forms used in Electrical work.
Write it on your activity sheets. (see rubrics in appendix)
11
12
Assessment: Independent Activity 1/ Independent act 2
I. 1. Inventory form
5. B 2. Job Order or work order
6. A 3. Borrower’s form
7. D 4. Purchase Requisition
8. C
9. B Independent Act 2
II.
10. Borrower’s form 1. Purchase requisition- is a document
11. Purchase Requisition form generated by a user department or storeroom
12. Inventory personnel
13. Job order form
2. Inventory are raw materials, work-in-
14. Purchase Requisition form
process goods and completely finished goods
III.
15. FALSE 3. Job order or Work Order form is a written
16. FALSE instruction to perform a work according to
17. TRUE specified requirements, within specified
18. TRUE timeframe and cost estimates.
19. TRUE
4. BORROWER’S FORM is a form used to
request for tools and equipment needed for a
particular job
Assessment
1. Purchase Requisition Form
2. Inventory Form
3. Borrowers form
4. Job Order Form
What I Have learned
1. Purchase requisition form
2. Inventory
3. Borrower’s form
4. Job order form
Answer Key
References
Learning Module
Website
“Example of Purchase Requisition Form - Google Search.” n.d. Google. Accessed January
13, 2021. https://tinyurl.com/y4qxa3qv.
“Inventory Form Sample Example - Google Search.” n.d. Google. Accessed January 13,
2021. shorturl.at/bwOTU.
“Electrical Borrowers Form Sample Example - Google Search.” n.d. Google. Accessed
January 13, 2021. shorturl.at/otDS7.
13
Appendix
Complete details
Neatness
Understanding
14
For inquiries or feedback, please write or call:
15