Professional Documents
Culture Documents
Friction Behaviour
Viscosity-Temperature-Behaviour good dependent on sliding speed Application
temperature
v (mm/s) f friction coefficient f
0.1 0.2 0.3 0.4
Color yellow
0 0.17
Permanent Low Temperature -15 °C 20 0.05
72 hrs fluid [+5 °F]
50 0.03
Application Temperature -10 °C to +80 °C 200 0.03
[+14 °F to +176 °F]
materials: steel/brass, load 3 N, 25 °C [77 °F]
Density 20 °C [68 °F] (DIN) 0.92 g/cm³ lubricant: Type 1-3 Bearing load
Surface Tension 30 mN/m
Evaporation Rate 0.4 %
24 hrs/105 °C [221 °F] very low Wear Behaviour
comparison: dry and lubricated with Type 1-3
Comments: Application:
Partially synthetic clock and instrument oil on base Watch and instrument oil for metallic sliding
of different synthetic ester oils, natural hydrocarbons combinations and jewel bearings in pocket and wrist
and polyalphaolefines. Type 1-3 is equipped with an watches, small or alarm clocks. For pivot bearings up Viscosity
additive package for high ageing and oxidation to 3 mm diameter (0.12 inches), teeth of
stability as well as corrosion resistance, which escape-wheels, cornet-screws, mainsprings.
ensures its application in the field of horology.
P120d
Dr. Tillwich GmbH Werner Stehr Phone: +49 (0) 7451 5386-0 All information reflects our best knowledge. No responsibility is Certified
Murber Steige 26 Telefax: +49 (0) 7451 5386-70 taken for printed data. Technical and chemical changes may occur acc. to
D-72160 Horb (Ahldorf) info@tillwich-stehr.com without notice. We cannot be held liable for any use or application. ISO 9001