Professional Documents
Culture Documents
Preservation Inspection Checklist-732508
Preservation Inspection Checklist-732508
Work Instruction
Preservation Inspection Preservation - Inspection Checklist
Revision: 0 Number: PSD-WIS-US-MFG-001 Revised: 01-03-11
Complete (1) Form per Component or Unit, Fill in S/N# and Date, Check appropiate Boxes, Report Damages, Sign/Date as Complete, Turn into Preservation Department
COMPRESSOR □ Type: Gemini FE565D2 S/N# Date: □ 1.3 Use Paint Marker to write Inspection Date on component.
□ 1.1 Verify all serial numbers. "PT/I Date" PT= Preservation Team I= Inspection
□ 1.2 Visually inspect component. PANEL □ Type: Murphy 50-30-2092-V12 S/N# Date: (NOT PRESERVATION)
* Check for damage and/or missing parts □ 1.1 Verify all serial numbers and drawing numbers.
* Check under distance piece for forklift damage □ 1.2 Visually inspect component.
* Check for water in lube box * Check for damage and/or missing parts
* Verify locknuts tightened on lube pump (see photo) * Ensure Desiccant bags are in Panel
* Ensure all openings are sealed * Verify doors are closed and sealed
* Ensure compressor feet are not on ground □ 1.3 Use Paint Marker to write Inspection Date on component.
□ 1.3 Use Paint Marker to write Inspection Date on component. "PT/I Date" PT= Preservation Team I= Inspection
"PT/I Date" PT= Preservation Team I= Inspection
Damages:
Tech. Sign-Off:
Date:
COPYRIGHT © 2009 EXTERRAN HOLDINGS, INC. the controlled version of this document form is stored on the Exterran intranet web site.
FOR INTERNAL USE ONLY - Not to be copied or released without written authorization. Page 1 of 1