Professional Documents
Culture Documents
2018
Date:-
Parameter
S.NO EVALUATION FACTORS GOOD AVERAGE POOR
Technical Aspects
1 Is opeartor capable of reading measuring instruments with perfection or not ?
2 Is Operator have basic knowledge of machine ?
Is opearator trained enough to ensure the difference between ok insert and wear out
3 insert point?
4 Is Operator Aware about insert change frequency ?
5 Does Operator Removes Chips from the Jaw before loading a part?
6 Does Operator Works on MDI mode Prior to start the cycle to evalute Job outness?
7 Is Operator capable to Check ovality, Outness and Runout issue?
Can Operator Read Hydraullic Oil Level, Lubrication Oil Level, Chuck Pressure and
8 tailstock Pressure Itself?
Quality Parameters
1 Is Operator Capable enough to do Visual Inspection of Component?
2 Does Operator Follows all the inspection Guidelines?
3 IS Operator having knowledge about Dent free production?
4 Does Operator ensures Go No-Go Gauge On 100% Parts?
Documentation
1 Does Operator fills SIC Reports Perfectly??
2 Does Operator fills Linewalk reports and follows the instruction in right manner??
3 Does operator Fills Logbook Card Perfectly?
4 Does Operator mention's Inspection parameter into Run Chart.
5 Does Operator Communicates with second shift operator for handover takeover??