You are on page 1of 5

SERIES RL CIRCUIT

Student Name: CHIRAG AHUJA UID: 20BCS5818


Branch: CSE Section/Group: 8(A)
Semester: 1 Date of Performance: 12/10/2020
Subject Name BEEE LAB Subject Code: 20ELP-112

1. Aim: To study the voltage-current relationship in an R-L series circuit and to determine the power factor
of the circuit.

2. Apparatus:
3. Circuit Diagram:

4. Steps for experiment:

1. Connect the circuit as shown in Fig.2


2. Vary the 1-∅ AC supply voltage with the help of 1- ∅ variac shown in Fig.
3. Switch on the resistive load by switching various lamps in resistive lamp banks and vary
the tapings of the choke coils.
4. Take readings of Vs, I, VL, VR, and P.
5. Increase resistive and inductive load by switching and repeat the procedure as stated in
steps 1 to 4.
6. Take at least 5 sets of readings and record the readings in Table.
7. Calculate impedance of the circuit, the impedance of coil, the internal resistance of the
coil, the inductive reactance of coil, and the inductance of coil and power factor from
readings.
5. Calculations/Theorems /Formulas used etc

W =VI Cosϕ eq. (i)

Power factor, Cosϕ = [W/(VI)] eq. (ii)

Therefore, ϕ = Cos-1[W/(VI)] eq.(iii)

6. Observations/Discussions:

, ϕ=46.34°

Cosϕ=0.69
S.NO. SUPPLY VOLTAGE VOLTAGE CURRENT POWER
VOLTAGE ACROSS ACROSS (A) (W)
(𝑽𝑺 ) RESISTOR COIL
1. 50 49.5 14.98 0.0495 1.708

2. 100 95 29.96 0.09 6.558

3. 150 141.4 44.94 0.1414 14.64


7. Result/Output/Writing Summary:

The calculated and graphical values of phase angle, power, and power factor of R – L
series are calculated.

Learning outcomes (What I have learnt):

1. CONNECTING INDUCTOR AND RESISTANCE IN PARALLEL.

2. EVALUATING POWER FACTOR.

3.EVALUATING RESISTANCE AND INDUCTANCE.

4.VOLTAGE ACROSS RESISTOR.


Evaluation Grid:

Sr. No. Parameters Marks Obtained Maximum Marks


1. Worksheet completion including writing 10
learning objectives/Outcomes.(To be
submitted at the end of the day).

2. Post Lab Quiz Result. 5


3. Student Engagement in 5
Simulation/Demonstration/Performance
and Controls/Pre-Lab Questions.

Signature of Faculty (with Date): Total Marks Obtained:

You might also like