This document contains calculations for determining the required head and power for transfer booster pumps for a swimming pool project. It calculates the volume and flow rate of water for the pool and selects a pump head of 2.0 bar and power of 1.4 kW for each of the two pumps based on the piping pressure drop, static head, desired supply head, and safety factors. Motor selection is also included, accounting for pump and motor efficiencies.
This document contains calculations for determining the required head and power for transfer booster pumps for a swimming pool project. It calculates the volume and flow rate of water for the pool and selects a pump head of 2.0 bar and power of 1.4 kW for each of the two pumps based on the piping pressure drop, static head, desired supply head, and safety factors. Motor selection is also included, accounting for pump and motor efficiencies.
This document contains calculations for determining the required head and power for transfer booster pumps for a swimming pool project. It calculates the volume and flow rate of water for the pool and selects a pump head of 2.0 bar and power of 1.4 kW for each of the two pumps based on the piping pressure drop, static head, desired supply head, and safety factors. Motor selection is also included, accounting for pump and motor efficiencies.
Project Name : Reference Drawings: Architectural drawing
Area of the Swimming pool 70.8 m2 Architectural Drawings
Average depth 1.225 m
Volume of Swimming pool 86.73 m3
Turn over period 4 hrs
Filteration rate 21.68 m3/hr
79.49 GPM
6.02 L/s
Qty of Pumps 2.00 Nos
Flow rate through each pump 3.01 Nos
Calculations for Pressure Drop in Piping
Description Fittings Equivalent Length Unit Piping Length Vertical 2.5 m Horizontal 40 m 80mm dia Elbows 15 m 80mm dia Isolation valves 20 m
Total equivalent Length 77.5 m
Considering safety 10% Equivalent length 85 m
Considering the piping chart and flow details; Friction Factor 5.0 m of Water/100m of piping
Total Frictional Drop in Piping 4.26 m of Water
0.42 bar
Pump head Requirement
Pressure drop in the piping 0.42 bar Static Head 0.25 bar Head required at supply 1.2 bar
Head required for online Chiller 0 bar
Overall head requirement 1.86 bar Considering 10% safety Head for the Pump 2.0 bar
Selected Head for the Pump 2.0 bar
204.9 kPa
Calculations for Motor Selection
Flow of the Pump 3.01 l/s Head Lift 204.9 kPa Efficincy of Motor 0.8 Efficiency of Pump 0.6 Power required for each Pump 1.3 kW Considering safety 10% Power required for each Pump 1.4 kW
Selected Motor 2.00 kW
Water flow rate 3.01 l /s
Selected Head for the Pump 2.0 bar
Originator by Reviewed by Approved by
Name:
Signature:
Doc. No.: DEC-MED-FRM-204-13 Rev.01 30 July 2013 Page 1
Transfer Booster Pump Head and Power Calculations
Date:
Doc. No.: DEC-MED-FRM-204-13 Rev.01 30 July 2013 Page 1