Professional Documents
Culture Documents
INTRODUCTION
1
CHAPTER II
COMPANY DESCRIPTION
2
CV Mutiara Digital Printing is open every Monday to Saturday. Working
hours at Mutiara Digital Printing start at 08.00 – 18.00. for afternoon
break from Monday to Thursday 12.00 – 13.00. while on Friday at 11.00
– 13.00.
3. Location andcompany floor plan
CV Mutiara Digital Printing is located at Jalan Perintis Kemerdekaan No. 9,
Ciamis, Ciamis District, Ciamis Regency, West Java 46211.
D. General Process
Some types of jobs in CV Mutiara Digital Printing, including the
following:
1. Accepting Orders
2. Graphic Design
3. Finishing
a. Banner
b. Sticker
3
CHAPTER III
DISCUSSION
A. Software Used
The software or type of application used to make banners in CV
MUTIARA DIGITAL PRINTING is as follows::
1. CorelDRAW
CorelDRAW is a graphics processing software that has uses to help
designers work. The software was developed by Corel Corporation, a
company based in Ottawa, Canada. Quoted from its official website, Corel
helps more than 90 million workers to be more creative and productive
through their products.
2. Print Manager/PhotoPrint
Print Manager / PhotoPrint is software used in CV MUTIARA
DIGITAL PRINTING to coordinate images or editing results for printing
with a banner printing machine.
4
C. Process
1. Banner Design
At this stage there are two ways of making banner designs, first
the design has been made by consumers and handed over to company
designers to then enter the printing process. Second, the company's
designers make banner designs according to consumer demand before
going into printing.
2. Banner Print Process
a. Transfer File Dari Desainer kepada Operator
After the design of the Banner is completed it is then sent to the
Indoor Machine Operator. At this stage the Indoor Machine Operator
collects and reassembles each design that has been sent from the designer
according to the size of the printed fabric.
b. Turn on the indoor printing machine by pressing the red button on
the top left of the machine
c. Put the printed cloth material from the back of the machine.
d. Then attach the clamp to the Banner material so that it is not easily
removed.
e. Then the design that has been prepared is printed by the Operator
with PhotoPrint / Print Manager software.
f. Wait until the printing process is complete.
g. After the Banners come out of the printing machine, then cut each Banner
according to its respective size. Then trim the Banner by cutting out the
unused parts or more.
h. After the banner is finished printed and cut, it is then given to the
finishing team.
3. Finishing
Here are the finishing steps after the banner is finished printing:
a. Open and place the banner on a large enough area to double-check
the printout.
5
b. Then fold each side of the banner for later glue, but there are also
some banners that do not require this process.
c. Install duck eyes / chicken eyes according to a predetermined point
using a handpress tool, but there are also some banners that do not
use duck eyes / chicken eyes.
d. Fold/Roll the Banner according to size..
e. Banners are handed over to consumers.
f. Payment by the consumer to the cashier.
6
CHAPTER IV
CLOSING
A. Conclusion
After the author carried out Field Work Practice (PKL) at CV
MUTIARA DIGITAL PRINTING Jl. Pioneer of Independence No.9, Ciamis,
Ciamis District, Ciamis Regency, West Java 46211 From February 1 to
March 31.
Field Work Practice Activities (PKL) train students to become
responsible individuals in carrying out duties and as provisions to enter the
world of work.
B. Suggestion
1. School
a. The placement of Field Work Practice (PKL) participants in
accordance with the existing learning program in the school so that
practice is more real with studies.
b. Schools should pay more attention to students who are carrying out
Field Work Practice (PKL) activities.
c. Provide encouragement to students to always be active and diligent
and enthusiastic in participating in productive activities directly.
2. Next Field Work Practice (PKL) Students
a. Always maintain the good name of yourself, school and place of
Field Work Practice (PKL).
b. Comply with applicable regulations in the place of carrying out Field
Work Practices (PKL).
c. Become active and creative students in the school environment and
in the place of Field Work Practice (PKL).
d. Be polite, honest and responsible for the duties given.
7
REFERENCES
Aisyah Siti, Paper on Mutiara Digital Printing, Ciamis, 2020Aisyah Siti, Paper on
Mutiara Digital Printing, Ciamis, 2020
Tribudiman Iman, Prakerin Report at Ponpes Sabilunnajat Public Kitchen, Ciamis,
2022
Understanding CorelDRAW: Functions, and Its Advantages in the World of
Design. https://www.gramedia.com/literasi/coreldraw-pengertian-fungsi-
dan-kelebihannya/#Pengertian_CorelDRAW. (accessed May 23, 2023)
Get to know these 10 Types of Banner Materials and Digital Printing Banners!.
https://solusiprinting.com/kenali-10-jenis-bahan-spanduk-dan-banner-
digital-printing-ini/. (accessed May 25, 2023)