Professional Documents
Culture Documents
of document
C Risk / C fault
1850002
00:00
Manager Guide Names Names Names Names
Names Names Names Names Names Names Names Names Names Names
ECO no. Document no. Issue
383605 1850002 13
Stage no. Chassis variant Issued by / date Safety risk Risk / C fault Quality point Actual time
SANTRO
1 16.11.2012
! C Q
Symbol No. Operations Comments Risks
Prepare harness
Names Names Names Names NamesNoms Names Names Names Names Names Names Names Names Names
ECO no. Document no. Issue
383605 1850002 13
Stage no. Chassis variant Issued by / date Safety risk Risk / C fault Quality point Actual time
SANTRO
Rule to follow 16.11.2012
! C Q
Symbol No. Operations Comments Risks
Rule which mustStage description
be followed without fail for fitting the LCD screen
Choose the first free place made up of 3 blanking pieces the furthest
to the right, and following this order: A, B, C , D, E or F
In the event that this is impossible, move the switches from position F to G
and use position F
E
B
C
G F E
D
Names Names Names Names NamesNoms Names Names Names Names Names Names Names Names Names
ECO no. Document no. Issue
383605 1850002 13
Stage no. Chassis variant Issued by / date Safety risk Risk / C fault Quality point Actual time
SANTRO
2 16.11.2012
! C Q
Symbol No. Operations Comments Risks
Fit the CK3000 control housing
Names Names Names Names Names Names Names Names Names Names Names Names Names Names Names
ECO no. Document no. Issue
Stage no. Chassis variant Issued by / date Safety risk Risk / C fault Quality point Actual time
SANTRO
3 16.11.2012
! C Q
Symbol No. Operations Comments Risks
Fit microphone conduit on the right
1 After having first removed the cover of
the instrument panel and the ICL.
(A)
2 Disengage the combined ICL by Notch made with
removing the screw (A) cutting pliers
3 Make a cut-out (B) to allow the (cut in a V)
microphone cable to pass through
(B)
4 Pass the microphone through the
opening and affix it as shown in the
photo.
Names Names Names Names Names Names Names Names Names Names Names Names Names Names Names
ECO no. Document no. Issue
Stage no. Chassis variant Issued by / date Safety risk Risk / C fault Quality point Actual time
SANTRO
4 16.11.2012
! C Q
Symbol No. Operations Comments Risks
Fit microphone conduit on the left
1 After having first removed the cover of
the instrument panel and the ICL.
(A)
2 Disengage the combined ICL by Notch made
removing the screw (A) with cutting
3 Make a cut-out (B) to allow the pliers (cut in
microphone cable to pass through a V)
(B)
Names Names Names Names Names Names Names Names Names Names Names Names Names Names Names
ECO no. Document no. Issue
383605 1850002 13
Stage no. Chassis variant Issued by / date Safety risk Risk / C fault Quality point Actual time
SANTRO
5 16.11.2012
! C Q
Symbol No. Operations Comments Risks
Stage description
Diagram of installation of CK3000 Evolution
THE CONTROL UNIT
MUST NOT BE EXPOSED
TO HEAT
Microphone
Supply cable
Mute cable
Grey White
Blue Green
Red Orange
Brown Black
Yellow cable
1 - rear right-hand loudspeaker White Grey
Vehicle radio
Names Names Names Names Names Names Names Names Names Names Names Names Names Names Names
ECO no. Document no. Issue
383605 1850002 13
Stage no. Chassis variant Issued by / date Safety risk Risk / C fault Quality point Actual time
SANTRO
6 16.11.2012
! C Q
Symbol No. Operations Comments Risks
Test
1 Perform a test to validate the installation
and check that it operates correctly
Names Names Names Names Names Names Names Names Names Names Names Names Names Names Names
ECO no. Document no. Issue
383605 1850002 13
Stage no. Chassis variant Issued by / date Safety risk Risk / C fault Quality point Actual time
SANTRO
7 16.11.2012
! C Q
Symbol No. Operations Comments Risks
Identification and tracking
1 Identify the assembly by applying the
appropriate label
Names Names Names Names Names Names Names Names Names Names Names Names Names Names Names