Professional Documents
Culture Documents
Sop For Operation & Calibration Procedure of Bod Incubator
Sop For Operation & Calibration Procedure of Bod Incubator
Purpose: This SOP outlines the procedure for the proper operation and calibration of the BOD
(Biochemical Oxygen Demand) Incubator.
Scope: This procedure applies to all personnel responsible for operating and calibrating the BOD
Incubator in the laboratory.
BOD Incubator
Procedure:
Operation:
Ensure that the BOD Incubator is clean and free from any contamination.
Power on the incubator and set it to the desired temperature and humidity, if applicable.
Monitor and maintain the incubation conditions as per the test method.
Follow the manufacturer's instructions for calibration, especially if the incubator has temperature or
humidity control.
Adjust the incubator settings as necessary to ensure accurate temperature and humidity control.
Document calibration details, including date, operator, and calibration standards used.
Safety Precautions:
Wear safety goggles and gloves when handling samples or making adjustments.
Maintenance: Clean the BOD Incubator regularly and perform routine maintenance as per the
manufacturer's instructions.