Professional Documents
Culture Documents
Total Marks: 20
01) As per IS 456 : 2000, the pure axial capacity of the column is calculated by using the
following expression Pu=0.4 f ck A c + 0.67 f y A sc. Here, what is the reason for using
0.67 f y instead of 0.87 f y ?
Ans: b)
02) According to IS 456: 2000, the maximum slenderness ratio of the column is ____
a) 80
b) 60
c) 34
d) 22
Ans: b) 60
03) What are the theoretical values of the effective lengths of the columns for the given
support conditions?
a) 2L for A; L for B
b) L for A; 2L for B
c) L for A; L for B
d) 2L for A; ∞ for B
e) L for A; ∞ for B
Ans: e)
04) The axial load of the column on the floor is 7500 kN. The story's clear height is 7.5 m. It is
subjected to the lateral load, which produces a story shear of 100 kN and a relative
displacement of 12.5 mm. What is the stability index of the column? Also, state the
column type.
05) Choose the appropriate answers concerning the lateral flexibility of the frame
a) The flexibility is calculated by only considering the column as the flexible member
b) The flexibility is calculated by only considering the beam as the flexible member
c) The total flexibility is the sum of flexibility due to flexible columns and flexible
beams
d) All the above
e) None of the above
Ans: c)
06) An RC column with a 300 x 600 mm cross-section has an unsupported length of 3m.
What is the minimum eccentricity of the column as per IS 456: 2000?
a) 16mm
b) 26mm
c) 20mm
d) 10mm
Ans: c) 20mm
07) What is the pure axial capacity of a column having the size of 450x450 mm with 2%
longitudinal reinforcement as per IS 456 : 2000? Consider the M40 grade of concrete
and the Fe415 grade of steel.
a) 4530 kN
b) 4300 kN
c) 4950 kN
d) 5200 kN
Ans: b)
08) The lateral confinement stress (f 2) in the spirally reinforced columns are increased by
____ (Select all the suitable answers)
Ans: a) & b)
09) Choose the appropriate statements regarding the need for transverse reinforcement in
the form of lateral ties in a column. (Select all the appropriate answers)
Ans: c) & d)
10) What is the range of effective length factors (k ) for sway and non-sway columns?
Ans: d)