Professional Documents
Culture Documents
Introduction
Process Oriented Storage Control use to map complex put-away or stock removal, to do
this we combine storage process steps into one storage process and can also trace the
status of the individual process steps.
Process oriented storage control only operated with handling units
Integration
Storage Control
You can use the process-oriented as well as layout-process control.
The goal of storage control is to display your complex put-away or stock removal process
steps based on your processes or your layout data.
During put-away or stock removal, an individual process step can be executed on single
level bases or multi level bases through intermediate storage types.
Process Oriented Storage Control can be combined with Layout Oriented storage Control.
In EWM always execute Process Oriented Storage Control first,
The Layout Oriented Storage control then check whether the sequence of put-away
process step is possible in lay out view, if required adjusts the flow of the put-away or
stock removal.
Based On the process-oriented storage control, EWM determined the following
put-away process
Unloading at door
Counting at counting station
Checking the quality
Executing value-added services
Put-away in high rack storage area
The layout-oriented storage control determines that a direct put-away in the
rack storage area is not possible and that the put-away must occur with the use
of an identification point.
Unloading at door
Counting at counting station
Identification of goods at the ID point
Put-away in high rack storage area
Prerequisite