Professional Documents
Culture Documents
Parameter
Optical Network Tester
4.3
port
VFL
port 4.3
OTDR&LS VFL OTDR&LS OPM
OPM
port
5
Bottom view
Home key
Short press to return
to the main interface
Menu key
Short press to pop up the shortcut menu Return key
Return to the previous menu
ON/OFF key
Short press to start,long press to
prompt to shut down;
After power on, briefly press to
turn on the flashlight function
13:24
13:24
2020/02/14
AUTO Expert
13:24 OPM
REF
12.00 dBm
5M
Shortcut Menu
4.
Screen capture:Capture the current interface, the picture will Home File Print Screen
Auto
5.
13:24
Auto OTDR: only need to set the wavelength, PASS
other parameters are automatically selected. Curve List Event Map
Settings: enter “Test Setting” / “Pass/Fail” 0 Len:96.150km
Event:
总长 80.001KM 累积 12.32dB 衰减
6.441dB AV.L:0.19dB/km
Link-L: 事件 12
setting interface /dB Auto Test 1550nm 100km 80ns
40.0
Test settings: set the wavelength, IOR and test 36.7 1:1
time 33.3
26.7
Avg. Loss Thre. : set the threshold of the 23.3
13.3
events in the link. If it is greater than this 10.0 3
0.0
Files: open the saved curve data 14.70 29.41 44.11 58.82 73.52 88.22 102.93 117.63
13:24
List: the test results are displayed in the form of a list.
PASS
Total length: the total length of the link
Curve List Event Map
Total-L: the total loss of the link
Auto Test 1550nm 8km 80ns
Avg.L: the average loss of the link
Total Length
Total Event: the total number of events, passed Total-L
Setting
设置 文件
Files Save
存储 Test
测试
Expert OTDR 7.
36.7 1:1
AutoTest/RealTest/Avg.Test 33.3 A 34.701km
24.30dB
Wavelength: select the test wavelength of OTDR 30.0
B
93.101km
26.7 12.36dB
Test range: usually choose about 2 times of the 23.3
16.7
Test pulse width: 3ns ~ 20000ns optional, different 13.3
2
3.3
0.0
14.70 29.41 44.11 58.82 73.52 88.22 102.93 117.63 /km
Rising event
100km 80ns
Setting
8.
Test Setting: Avg.Time,Wave and Refractice Index are the
13:24
same as those in Auto OTDR.
Refractive Indexx: provided by optical cable or fiber manufac- Test Setting Pass/Fail
turer.It is the key parameter for calculating the distance, and can
not be set arbitrarily. Avg.Time 5s
Unit:select the required unit, there are 3 options for mi/km/kft.
Wave 1550nm
Real Time Test Analyse:Open/Cancel the real Time Test
Analyse function at the end of real-time test Refractive Index (1550nm) 1.468000
Event Loss Threshold: set the loss threshold of connection
point, fusion point in the link that can be tested, between 0.2dB ~ Unit km
30dB, and the default value is 0.2dB. Loss value larger than the
Real Time Test Analyse Open
setting value will be listed in the event list, or it will be ignored.
Reflectance Threshold: set the return loss threshold of the link Event Loss Threshold 0.20dB
reflection events that can be tested, ranging from 10dB to 60dB,
the default value is 40dB. Reflectance Threshold 40.00dB
End Loss Threshold: set the loss threshold after link that can be
End Loss Threshold 10.00dB
tested, ranging from 1dB to 30dB, the default value is 10dB.
Auto Save: Open/Cancel the Auto Save file function at the end of Auto Save Open
real-time test.
OK: save the set parameters OK Default Cancle Test
13:24
OTDR-File Save Curve List
曲线 列表 Event
事件地图 Map
the【 Save 】 事件: 33 总长:
总长 80.001KM
Event: 累积 12.32dB
Len:95.160km 累积: 衰减 0.23dB/km
18.441dB
Link-L:6.441dB 衰减:
AV-L: 事件 12
0.19dB/km
A-B光标
CursorAB 距离:
Dis:58.400km
A-B 80.001KM 损耗: 11.940dB
Loss:
累积 12.32dB 衰减 衰减:
AV-L:
0.23dB/km0.19dB/km
事件 12
/dB 自动测试
Auto Test 1550nm
1550nm 100km
100km 80ns
80ns
40.0
36.7 1:1
33.3 A 34.701km
24.30dB
30.0
B
93.101km
26.7 12.36dB
23.3
20.0 1
16.7Save file 2
10.0 3
6.7
1 2 3 4 5 6 7 8 9 0
3.3
0.0
14.70 29.41 44.11 58.82 73.52 88.22 102.93 117.63 /km
Q W E R T Y U I O P
平均测试
Auto Test
A S D F G H 1550nm
J K L
Z X100km
C V B N M 80ns
Clear
Fast
快速设置
Setting
- < 参数设置
Setting
> 文件
Files
Space Save
保存
Save Exit
测试
Test
10.
13:24
OTDR-File Operation File
【Files】
SD 12345678910215
Rename: change the name of the current file or folder 2 0325_003122313.SOR 2020-04-21
4 0325_003121231.SOR 2020-04-21
5 0325_003321312.SOR 2020-04-21
6 0325_003321312.SOR 2020-04-21
7 0325_003121322.SOR 2020-04-21
8 0325_003131232.SOR 2020-04-21
Page 4-1
11.
Optical splitter
Event 1550nm
End of the link
Settings Files Save Test
12.
-50.00dBm
Wave: switch the working wavelength
Reference: set current power as reference power
CAL: enter the user calibration mode and
calibrate with the standard light source
TWINS: identify the wavelength and frequency of the 1310 nm Rel.Pow: -50.00 dB
tested laser source. This function is used with the twins Lin.Pow: 10.0 nw
function of the laser source Tone.Det: CW
Ref:0.00 dBm
-50~+26dBm: received power>-10dBm
-70~+6dBm: received power>-30dBm
13.
13:24
13:24
VFL
VFL
650
Output Mode
nm
650nm OFF
DANGER
DANGER
避免直视激光输出口,激光会对人
眼视网膜造成伤害!
Normal: turn on red light, continuous light Looking directly at laser output
may cause damage to human eyes!
1Hz: red light flashes once in 1 second
2Hz: red light flashes twice in 1 second
Close: turn off red light
14.
13:24
Laser Source
Output Mode
1550 nm CW
Open: turn on the laser source
Wave: switch the wavelength, the output
DANGER
wavelength is consistent with OTDR
Mode: switch the modulation frequency of
light source, CW/270/330/1000/2000Hz optional Looking directly at laser output
may cause damage to human eyes!
TWINS: enter the paired output mode. This
function is used with the twins function of
optical power meter
Warning
Open Wave Mode TWINS
13:24
Optical Loss
Test
Used to test the insertion loss of optical
passive components.
The loss test steps are as follows:
1)First connect the LS and opm optical interfac- LS LOSS
es with standard jumpers,Press 【Open】 and
press 【Reference】after the power is stable. 1550 nm <-70 dB
2)Then connect the tested part to LS and opm
optical interfaces with standard jumper, Press OPM Lin.Pow Ref
【Open】, and "relative power" is the insertion
loss of the tested part. -29.86dBm 0.00nm 2dBm
Tracker 16.
Used for Rj45 tracker. After the line-finding function is activat- RJ45 Tracker
ed, the cable being searched is touched by the distal end of the
line-searching, and the sound of continuous “ticking and
ticking” heard.
The equipment can withstand voltage and
prevent burning, and can be directly charged
for line finding. Ethernet switch, router and
other weak current equipment with DC
voltage less than 60V.
Start: open the RJ45 cable tracking function
Analog Mode/Digital Mode: different route
tracking methods Access to left port,
Standard : Digital cable tracker Support live test!
13:24
RJ45 Sequence
Measure the sequence of 8-core wires inside
the network cable. Please connect to the
remote module when measuring.
1
Warning
Please do not test online! Please access the remote
module before testing!
13:24
200m
Warning
Please do not test online!
Please access the remote
module before testing!
LaserLaser Ranging
Ranging(Optional) 19.
13:24
Laser Range: the maximum test distance is 40 meters Laser Ranging
Mode:Single/Continuous
Reference plane: select a different reference plane
Starting from the bottom of the instrument, the
test length includes the length of the instrument; Mode
System
20.
18.
13:24
brightness
Brightness
Energy conservation: slide the progress bar to set automatic 48%
screen power off without operation for 1-10 minutes Energy Conservation
Auto OFF:slide the progress bar to set the automatic 3min
shutdown time without operation Auto OFF
Date & Time: set the instrument date and time 55min
Sound: turn the touch tone on or off System Operation Settings
Flashlight: turn the flashlight on or off
Date&Time 2021-04-05 08:25
USB connection: connect to the computer after opening and
Beep ON
transfer data
USB Connection OFF
Bluetooth:turn Bluetooth on or off
Bluetooth ON
Language: displays the native language type
Language English
Auto Save: automatically save the curve file after opening
Restore Factory
Restore factory settings: restore default parameter values
Update
Upgrade: software upgrade
Information
Version information: view local information and alarm
records
Faults
Laserand
Laser Solutions
Ranging
Ranging 21.
17.
The description in the
right table is for
reference only. Please
refer to the new
instruction for
detailed usage. In the
process of using the
instrument, if you
have any questions,
you can contact the
instrument supplier.
Output connector of OTDR is damaged
Test curve with poor quality. Increase test pulse width parameter, increase the
The average loss value of optical fiber The test curve front end with too long tail.
is not accurate.
Laser
Laser Ranging
Ranging
Maintenance 22.
Cleaning of connectors
The optical output interface of this series OTDR is a replaceable universal interface, and the end
face must be kept clean during use. When the instrument fails to test the normal curve or the test result
is not accurate, first consider cleaning the connector.
When cleaning, be sure to turn off OTDR and visible red light fault location function. Screw off the
output port and wipe the connection end face with a special dust-free paper towel or cotton swab
wetted with alcohol.
At the same time, please cover the dust cap after using the instrument, and keep the dust-proof clean
at the same time.
Instrument screen cleaning
The display of this series of optical time domain reflectors is 4.3 inch TFT full view color LCD with
capacitive touch screen. When using, do not click on the LCD with sharp objects, or the LCD screen
may be damaged. When cleaning, clean the LCD screen with soft paper. Do not wipe the LCD screen
with organic solvent, otherwise it may damage the LCD screen.