Professional Documents
Culture Documents
Inspection Standard
Dimension Standard Visual Standard
Color - (Refer to Master Sample)
Gate Burr - - 0.2mm ~ 0mm
1
0.
- Contamination: (Refer to Defect Dimension Guide for judgment)
Black mark / Stainmark - < 0.3mm2 (for level 1)
/
0
+ - < 0.5mm2 (for level 2 & 3)
Note: if distance is over 200mm then within limit - OK
5
7.
if distance is under 200mm then sum is within limit - OK
=
A
Silver Streak - refer to defect sample limit
Short mold - refer to defect sample limit
Shrinkage - refer to defect sample limit
Scratch - refer to defect sample limit
Crack / broken - No Good
Flow Mark - refer to defect sample limit
B = 2.0 ± 0.1 Deformation - refer to defect sample limit
Discoloration - refer to defect sample limit
Measuring Equipment = Caliper
Inspection Result
Dimension Inspection Result: (Sampling Qty. & Frequency = 3 pcs./cavity every start-up then end-time)
Visual Inspection Result: (Sampling Qty & Frequency = 5 pcs./cavity start-up then every 2 hours)
Productio
n Date
Part Name Cavity 1 Cavity 2 Cavity 3 Cavity 4 Cavity 1 Cavity 2 Cavity 3 Cavity 4
Remarks Remarks
Lotting OK NG OK NG OK NG OK NG OK NG OK NG OK NG OK NG
6-8
8-10
10-12
12-2
2-4
4-6
Checked by: /