Instructor’s Name Mr. Wayne Tillett Date: Oct. 16 – 27, 2023
Class/Programs Pre-Vocational 1-1 Week: 7- 8 (Cycle4) Prepared by: W Subject Technical Drawing ayne Tille Date: LessonFriday, Topic/sOctober 29, 2023of Technical Drawing History Topic: Module 1: Introduction to Technical Drawing Instructor Learning Objectives Learning Objective(s) At the end of the cycle, students will be able to: 1. Define Technical Drawing. 2. Appreciate the importance of Technical Drawing in daily life. 3. Explain the importance of Technical Drawing in the three areas. 4. Explain what the standards are. 5. Explain what engineering codes are. 6. Appreciate the importance of standards in trade. 7. Intro to use of drawing instruments. Participatory Learning Theoretical 1. Review the history of Technical Drawing. Activity/Practical 2. Give trainees a quiz on History of Technical Drawing. Activity 3. Review the three areas of Technical Drawing and provide examples of the use of TD. 4. Review the good work practice guidelines used in Technical Drawing. 5. Review what the AISI, ASTM, ISO, and BS standards are. Test #1 Resources and 1. Laptop/Electronic Devices materials 2. White Board 3. Eraser 4. White board Markers 5. Projector 6. Internet: https://www.oshwin.com/blog/difference-between-aisi-and- astm.html https://blog.wavin.co.uk/what-are-british-standards/ https://www.wermac.org/documents/ engineering_standards_what_are.html 7. https://www.youtube.com/watch?v=JMkpMhBO5vE Assessments 1. Oral questioning on the importance of technical drawing 2. Classwork submission on circles and lines. Summary/Closure 1. Quiz on use of T.D equipment. Evaluation (2nd -13th Pre-Voc 1-1: I will have to repeat this lesson plan because there was an Sep. 2023) incidence of theft in the class and other unforeseen keep backs during the cycle. I was not able to complete this lesson plan and the trainees didn’t seem prepared for the test. Approved by: ________________ Date: __________ HOD
Feedback: Very good lesson plan, kindly fill in the section on instructor and date.