You are on page 1of 12

OLIVER THE ELEPHANT

crochet pattern by Baturina Tatiana


Hi, my name is Tatiana and I am glad to
welcome you to the pages of this workshop.
You have purchased this description, so you are
ready to dive into the magical world amigurumi.

I'm sure you'll succeed, but if you have any


questions, you can always ask for help:

instagram medvedik.toys
I'm on facebook medvedik.toys
my etsy shop CuteToysByTatiana

This pattern is my work of authorship. Full or partial


copying, resale, publication on the Internet and transfer to
third parties is prohibited.
With ready-made toys, you can dispose of as you wish.

When publishing a finished toy, please indicate the author Baturina Tatyana or
@medvedik.toys

Happy crocheting and smooth loops!!!

NOTE AND RECOMMENDATIONS.

You can crochet from any yarn and a suitable


hook for it.

The size of the toy depends on your yarn, the


hook number and the crochet density, as well
as the crochet method.

When crocheting with ticks (the first and second


capture of the thread from the bottom), the toy will
turn out more than if you crochet with half-crosses (the
first capture of the thread from the top, second from the bottom).

To carefully pull the hole, grab only the front half-loops.

All parts are crocheted in a spiral, unless otherwise specified.


Use a marker or contrast thread to avoid losing the beginning of the row.

All parts are filled in during the crocheting process, unless otherwise specified.

At the end of each row in (...) the total number of loops or the number of rows is
specified.
2
MATERIALS AND TOOLS

-yarn alize cotton gold 330m/100 gr


№ 533 light gray for elephant
- yarn art jeans 160m/ 50 gr
№ 85 orange for the jumpsuit
- hook 2 mm (B)
- safety eyes d= 12 mm d= 12 mm
- filler, scissors, long needle, pins
- fine thread for decoration, dark gray and white color
- 15 cm trunk wire and Band-aid
- 2 pcs buttons d= 11 mm for jumpsuit
- 2 disks d=25 mm T shaped cotter pin 2,5 * 2 mm, needle-nose pliers

The size of the finished toy, taking into account the specified materials, is 22 cm or 8.66 inches.
The method of crocheting half-crosses.

ABBREVIATIONS

MR- magic ring ch – chain


sc – single crochet inc – increase (two sc in one stitch)
dc – double crochet dec - decrease (two stitches crocheted together)
st- stitch dec dc- decrease double crochet
dc5tog- 5 double crochet together (Bobble stitch)
slst- slip stitch BLO- Back loop crochet FLO- front loop crochet

3
trunk
Crochet in light gray color. The trunk is not filled tightly.
1 rnd- 6 sc in MR
2 rnd- 6 inc (12)
3-8 rnds- 12 sc (6 rnds)
9 rnd- (2 sc, inc)*4 (16)
10-13 rnds- 16 sc (4 rnds)
14 rnd- (3 sc, inc)*4 (20)
15-18 rnd- 20 sc (4 rnds)
19 rnd- (4 sc, inc)*4 (24)
Take the wire, make loops on both sides,
isolate it with a Band-Aid. Insert it into the trunk.
Stuff the trunk
20-23 rnds- 24 sc (4 rnds)
24 rnd- 18 sc, inc, 4 sc, inc (26)
25-27 rnds- 26 sc (3 rnds)
28 rnd- 18 sc, inc, 6 sc, inc (28)
29 rnd- 18 sc, inc, 8 sc, inc (30)
30 rnd- 30 sc
Fasten and trim the thread. Use additional markers to mark
1 st and 18 st.

head
1 rnd- 6 sc in MR
2 rnd- 6 inc (12)
3 rnd- (sc, inc)*6 (18)
4 rnd- (2 sc, inc)*6 (24)
5 rnd- (3 sc, inc)*6 (30)
6 rnd- (4 sc, inc)*6 (36)
7 rnd- (5 sc, inc)*6 (42)
8 rnd- (6 sc, inc)*6 (48)
9rnd - (7 sc, inc)*6 (54)
10 rnd- 54 sc
11 rnd- 9 sc, (2 sc, inc)*3, 18 sc, (inc, 2 sc)*3, 9 sc (60)
12-13 rnds- 60 sc (2 rnds)
14 rnd- 24 sc, 12 sc together with the inside of the trunk, 24 sc (60)

4
15 rnd- 24 sc, 18 sc on the remaining trunk stitch, 24 sc (66)
16 rnd- (6 sc, dec)*3, 18 sc, (dec, 6 sc)*3 (60)
17-22 rnds- 60 sc (6 rnds)
Insert the eyes between the 17 and 18 rows, for a distance of 16 st.
Insert the disc with the cotter pin into the amigurumi ring,
start stuffing. If you do not plan to use cotter pin, skip the
previous step.

23 rnd- (8 sc, dec)*6 (54)


24-25 rnds- 54 sc (2 rnds)
26 rnd- (7 sc, dec)*6 (48)
27 rnd- 48 sc
28 rnd- (6 sc, dec)*6 (42)
29 rnd- (5 sc, dec)*6 (36)
30 rnd- (4 sc, dec)*6 (30)
31 rnd- (3 sc, dec)*6 (24)
32 rnd- (2 sc, dec)*6 (18)
33 rnd- (sc, dec)*6 (12)
34 rnd- 6 уб

Pull the hole only by the front


loops. Fasten and trim the thread.
Hide the end of the thread inside the part.
Make tightening, as shown in the photo
below. Embroider eyes with white thread

5
ears (2 pcs)
Crochet in rotating rows
1 row- 6 sc in MR
2 row- ch, turn, 6 inc (12)
3р- ch, turn, (sc, inc)*6 (18)
4р- ch, turn, 6 sc, 6 inc, 6 sc (24)

6
5 row- ch, turn, 6 sc, (sc, inc)*6, 6 sc (30)
6р- ch, turn, 6 sc, ( 2 sc, inc)*6, 6 sc (36)
7р- ch, turn, (5 sc, inc)*6 (42)
8р- ch, turn, (6 sc, inc)*6 (48)
Fold the part in half and on both sides crochet 6-7 sc.
Fasten the thread and cut it off, leaving the end for sewing.
Sew the ears between the 16 and 22 rows.

body
Crochet in light gray color. Body for
cotter pin mounting. Crochet from top to bottom.
1 rnd- 6 sc in MR
2 rnd- 6 inc (12)
3 rnd- (sc, inc)*6 (18)
4 rnd- (2 sc, inc)*6 (24)
5 rnd- (3 sc, inc)*6 (30)
6-7 rnds- 30 sc (2 rnds)
Insert the cotter pin into the amigurumi ring,
put the disk on and secure it, using needle-nose pliers.
8 rnd- (4 sc, inc)*6 (36)
9-10 rnds- 36 sc (2 rnds)
11 rnd- (5 sc, inc)*6 (42)
12-13 rnds- 42 sc (2 rnds)
14 rnd- (6 sc, inc)*6 (48)
15-16 rnds- 48 sc (2 rnds)
17 rnd- 15 sc, (2 sc, inc)*6, 15 sc (54)
18-25 rnds- 54 sc (8 rnds)

7
26 rnd- 54 sc, crochet the tail, 9 ch, starting from the 2nd st from
the hook, 8 slst by chain
Start stuffing, pay special attention to the neck.
27 rnd- (7 sc, dec)*6 (48)
28 rnd- 48 sc
29 rnd- (6 sc, dec)*6 (42)
30 rnd- (5 sc, dec)*6 (36)
31 rnd- (4 sc, dec)*6 (30)
32 rnd- (3 sc, dec)*6 (24)
33 rnd- (2 sc, dec)*6 (18)
34 rnd- (sc, dec)*6 (12)
35 rnd- 6 dec
Pull the hole only by the front loops. Fasten and trim the thread. Hide
the end of the thread inside the body.
If you crochet without cotter pins, the body is crocheted from the
bottom up.
1 rnd- 6 sc in MR
2 rnd- 6 inc (12)
3 rnd- (sc, inc)*6 (18)
4 rnd- (2 sc, inc)*6 (24)
5 rnd- (3 sc, inc)*6 (30)
6 rnd- (4 sc, inc)*6 (36)
7 rnd- (5 sc, inc)*6 (42)
8 rnd- (6 sc, inc)*6 (48)
9 rnd- 48 sc
10 rnd- (7 sc, inc)*6 вcrochet the tail, 9 ch, starting from the 2nd st
from the hook, 8 slst by chain
11-18 rnds- 54 sc (8 rnds)
19 rnd- 15 sc, (2 sc, dec)*6, 15 sc (48)
Start stuffing.
20-21 rnds- 48 sc (2 rnds)
22 rnd- (6 sc, dec)*6 (42)
23-24 rnds- 42 sc (2 rnds)
25 rnd- (5 sc, dec)*6 (36)
26-27 rnds- 36 sc (2 rnds)
28 rnd- (4 sc, dec)*6 (30)
29-30 rnds- 30 sc

8
Fasten the thread and cut it off, leaving the end for sewing.
Sew on the head.

arms (2 pcs)
Crochet in light gray color.
1 rnd- 6 sc in MR
2 rnd- 6 inc (12)
3 rnd- (sc, inc)*6 (18)
4 rnd- BLO 18 sc
5-6 rnds- 18 sc (2 rnds)
7 rnd- 6 sc, 3 dec, 6 sc (15)
Start stuffing.
8-21 rnds- 15 sc (14 rnds)
22 rnd- (3 sc, dec)*3 (12)
23 rnd- 12 sc
Pull the hole only by the front loops. Fasten and trim the thread. Hide
the end of the thread inside the part.

legs (2 pcs)
Crochet in light gray color.
1 rnd- 6 ch, starting from the 2nd st from the hook, 4 sc, 3 sc in 1 st,
on the other side 3 sc, inc (12)
2 rnd- inc, 3 sc, 3 inc, 3 sc, 2 inc (18)
3 rnd- sc, inc, 3 sc, (sc, inc)*3, 3 sc, (sc, inc)*2 (24)
4 rnd- (3 sc, inc)*6 (30)
5 rnd- BLO 30 sc
6-7 rnds- 30 sc (2 rnds)
8 rnd- 7 sc, 6 dec, 11 sc (24)
9 rnd- (6 sc, dec)*3 (21)
10 rnd- (5 sc, dec)*3 (18)
11-13 rnds- 18 sc (3 rnds)
14 rnd- 2 dec, 4 sc, 4 inc, 4 sc, dec (19)
15 rnd- 19 sc
16 rnd- 2 inc, 4 sc, 4 dec, 4 sc, inc (18)
17-23 rnds- 18 sc (7 rnds)
24 rnd- (4 sc, dec)*3 (15)
25 rnd- (3 sc, dec)*3 (12)

9
Pull the hole only by the front loops. Fasten and trim the thread.The
end is hidden inside the part.
Attach the legs and arms to the body, using a thread attachment.
(the diagram is shown below). If you used a cotter pin, then the thread
runs in the body between the 8 and 9 rows for the arms and between
27 and 28 rows for the legs. In the arms and legs, the thread runs in 3
rows from the end of the crochet.
If you have not used a cotter pin, the thread runs in the body between
the 27 and 28 rows for the arms and between the 9 and 10 rows for the
legs.
Use a thin dark gray thread to embroider the eyebrows and stripes on
the trunk.

10
jumpsuit
Crochet in orange color, from bottom to top.
Start with pant legs
1 rnd- 30 ch, close in a circle, using slst
2 rnd- ch, 30 sc, slst
3-6 rnds- 2 ch, 30 dc, slst
Fasten and trim the thread. On the second pant leg, do not cut the thread and
continue to crochet
7 rnd-2 ch, 15 dc on the one pant leg, 30 dc on the second, 15 dc on the first,slst
Sew the hole between the pant legs.
8 rnd- 2 ch, (dc5tog, 5 dc)*10, slst
9 rnd- 2 ch, 60 dc, slst
10 rnd- 2 ch, 4 dc, (dc5tg, 5 dc)*9, dc5tog, dc, slst
11 rnd- 2 ch, 60 dc, slst
12 rnd- 2 ch, (dc5tog, 5 dc)*10, slst
13 rnd- 2 ch, 60 dc, slst
14 rnd- 2 ch, 4 dc, (dc5tog, 5 dc)*9, dc5tog, dc, slst
15 rnd- 2 ch, (13 dc, dec dc)*4, slst
16 rnd- 2 ch, 2 dc, dc5tog, 4 dc, dc5tog,
3 dc, dec dc, dc5tog, 4 dc, dc5tog,
5 dc, dc5tog, dc, dec dc, 2 dc,
dc5tog, 4 dc, dc5tog, 3 dc, dec dc,
dc5tog, 4 dc, dc5tog, 3 dc, dec dc,
dc5tog, 3 dc, slst
17 rnd- 2 ch, (11 dc, dec dc)*4, slst
18 rnd- ch, ( 10 sc, dec)*4, slst
Fasten and trim the thread.
Fold the part in half. Notice
side points, for a distance of 22 st.
Attach the thread, crochet the front
part of the rotating rows
1 row- 2 ch, 9 dc, 2 dec dc, 9 dc
2 row- 2 ch, turn, (3 dc, dec dc)*2, (dec dc,
3 dc)*2
3 row- 2 ch, turn, (2 dc, dec dc)*2, (dec dc,
2 dc)*2

11
4 row- ch, turn, 12 sc
Fasten and trim the thread. Sew 2 buttons.
Crochet 2 straps, to do this, dial 24 ch, starting from the 10th st from
the hook, crochet 15 slst. Sew on the back in the center.

Congratulations, your toy is ready!!!


Thank you for your interest in my work.
I will be glad to see your
work on this
pattern.

12

You might also like