Professional Documents
Culture Documents
: WI/MR/18
DIAMOND TITLE: WORK INSTRUCTION FOR RADIAL
INDUSTRIES DRILLING AND REAMING (M/C)
PG. NO. : 01 of 01
05 Before start the work verify the reamer and drill size from shift supervisor.
06 Ensure the drill and reamer did not be bend are broken.
08 Frist pice should be take a approval from shift supervisor are Q.A. person. QF/QA/07
14 After completion of work clean the area and switch off the power supplie
REV. NO.: 00
REL DT. : 01/05/2018 PREPARED BY – MR APPROVED BY – CEO