Professional Documents
Culture Documents
Remarks
of each
Weight
Weight
Marki Middle Lower Total
Total
S.No Description Unit Chowk Damauli Marsyangdi Marsyangdi Nos.Qty
set
1 132 kV Incoming Gantry- 1Bays Nos 1 0 0 0 1 3224.78 3224.7757
2 133 kV Incoming Gantry- 2Bays Nos 0 1 0 0 1 4964.53 4964.5272
3 133 kV Incoming Gantry-4Bays with DS Nos 1 0 0 0 1 8030.74 8030.7419
4 134 kV Internal-5Bays Nos 1 0 0 0 1 10183.78 10183.782
5 132 kV CVT Nos 18 12 3 0 33 166.17 5483.74
6 132 kV CT Nos 18 12 3 0 33 156.60 5167.79
7 132 kV PI Nos 36 6 0 0 42 165.97 6970.59
8 120 kV LA Nos 15 12 3 0 30 126.98 3809.40
9 132 kV DS with ES Sets 4 4 1 0 9 339.81 3058.31
10 132 kV DS without ES Sets 16 4 1 0 21 334.22 7018.62
11 33 kV Busbar -1Bay Nos 2 2 1221.85 2443.69
12 33 kV Gantry -2Bay Nos 1 0 0 0 1 2596.09 2596.09
13 33 kV DS Sets 3 0 0 0 3 235.29 705.86
14 33 kV PT Nos 3 0 0 0 3 96.49 289.47
15 33 kV CT Nos 9 0 0 0 9 106.19 955.72
16 33 kV LA Nos 9 0 0 0 9 105.82 952.42
17 33 kV PI Nos 6 0 0 0 6 119.52 717.10
Total Sets 66572.64 Kg.
WEIGHT CALCULATION OF GANTRY STRUCTURES
Beam
1 L5-leg ISA75x75x5 4 No. 7175 75 5 5.69 40.835 1.866 163.339 3.433 166.77
2 L6-leg ISA75x75x5 8 No. 670 75 5 5.69 3.813 0.174 30.505 0.641 31.15
3 BR16-bracing ISA45x45x5 16 No. 1058 45 5 3.34 3.530 0.275 56.476 2.025 58.50
4 BR17-bracing ISA45x45x5 16 No. 1041 45 5 3.34 3.473 0.271 55.569 1.992 57.56
5 BR18-bracing ISA45x45x5 16 No. 950 45 5 3.34 3.169 0.342 50.711 2.517 53.23
6 BR19-bracing ISA45x45x5 16 No. 950 45 5 3.34 3.169 0.304 50.711 2.237 52.95
7 BR20-bracing ISA45x45x5 16 No. 950 45 5 3.34 3.169 0.247 50.711 1.818 52.53
8 BR21-bracing ISA80x80x6 9 No. 733 80 6 7.25 5.317 0.191 47.851 0.789 48.64
9 BR22-bracing ISA65x65x6 3 No. 800 65 6 5.84 4.672 0.208 14.017 0.287 14.30
9 BR22-bracing ISA45x45x5 12 No. 585 45 5 3.34 1.952 0.152 23.420 0.840 24.26
`
Fittings & Accessories
1 GP-1 gusset plate (128x128x6) 4 No. 128 128 6 0.77 0.099 0.018 0.395 0.033 0.43
2 GP-2 gusset plate (230x128x6) 4 No. 230 128 6 1.39 0.319 0.032 1.276 0.058 1.33
3 GP-3 gusset plate (232x188x6) 4 No. 232 188 6 2.05 0.477 0.046 1.906 0.085 1.99
4 GP-4 gusset plate (250x128x6) 2 No. 250 128 6 1.51 0.377 0.034 0.754 0.032 0.79
5 GP-5 gusset plate (229x125x6) 24 No. 229 125 6 1.35 0.309 0.031 7.410 0.340 7.75
6 GP-6 gusset plate (177x160x6) 8 No. 177 160 6 1.33 0.236 0.030 1.889 0.112 2.00
7 GP-7 gusset plate (299x232x6) 2 No. 299 232 6 3.27 0.977 0.073 1.954 0.067 2.02
8 GP-8 gusset plate (229x140x6) 8 No. 229 140 6 1.51 0.346 0.034 2.766 0.126 2.89
9 GP-9 gusset plate (222x140x6) 4 No. 222 140 6 1.46 0.325 0.033 1.300 0.061 1.36
10 TP-1 top plate (304x304x8) 2 No. 304 304 8 5.80 1.764 0.097 3.529 0.090 3.62
11 CL-1 cleat angle (200x80x10) 8 No. 200 80 10 11.78 2.355 0.052 18.840 0.191 19.03
12 Filler for CL-1 (100x60x2) 8 No. 100 60 2 0.09 0.009 0.006 0.075 0.023 0.10
13 Filler for J-3 (128x50x5) 8 No. 128 50 5 0.25 0.032 0.007 0.257 0.027 0.28
14 CL-4 cleat plate (360x75x6) 8 No. 360 75 6 1.27 0.458 0.030 3.662 0.109 3.77
15 C P -1 37.5mm dia. x 10mm thick 24 No. 38 10 0.09 0.002 2.137 0.020 2.16
16 C P -1 37.5mm dia. x 8mm thick 12 No. 38 8 0.07 0.002 0.855 0.009 0.86
17 C P -1 37.5mm dia. x 5mm thick 8 No. 38 5 0.04 0.001 0.356 0.005 0.36
18 Stiffner in top plate (30x25x5) 8 No. 30 25 5 0.03 0.001 0.001 0.007 0.004 0.01
19 Lightening stud 2 No. 20 250 2.47 0.708 0.016 1.415 0.014 1.43
20 Base plate (300x300x16) 8 No. 300 300 16 11.30 3.391 0.100 27.130 0.367 27.50
21 Stiffner in base plate (100x75x10) 32 No. 100 75 10 0.59 0.059 0.009 1.884 0.138 2.02
22 20mm dia. Anchor bolt 32 No. 20 1000 2.47 2.557 0.063 81.828 0.924 82.75
23 M20 Nut in anchor bolt 64 No. 26 15 0.063 0.001 4.001 0.039 4.04
24 Washer For M20 Nut and Anchor Bolt 32 No. 40 3 0.017 0.001 0.533 0.021 0.55
25 Cleat welded in anchor bolt (70x70x10) 32 No. 70 70 10 0.38 0.027 0.006 0.862 0.094 0.96
26 M16 Bolt 16x50 mm in column 944 No. 16 70 1.58 0.175 0.004 165.043 1.527 166.57
27 M16 Nut in column 944 No. 26 15 0.063 0.001 59.016 0.573 59.59
28 Washer For M16 Nut and Bolt in column 944 No. 27 4 0.018 0.001 16.971 0.328 17.30
29 M16 Bolt 16x50 mm in beam 354 No. 16 70 1.58 0.175 0.004 61.891 0.573 62.46
30 M16 Nut in beam 354 No. 26 15 0.063 0.001 22.131 0.215 22.35
31 Washer For M16 Nut and Bolt in beam 354 No. 30 3 0.007 0.001 2.619 0.139 2.76
32 M16 Foot Bolt 16x180 mm 54 No. 16 200 1.58 0.380 0.010 20.521 0.250 20.77
33 M16 Nut in beam 54 No. 26 15 0.063 0.001 3.376 0.033 3.41
34 Washer For M16 Nut and Bolt in beam 54 No. 30 3 0.007 0.001 0.400 0.021 0.42
Total = 3224.78 kg.
Note:
1. All Steel Plates, Angles confirm to IS 2062 of minimun guaranteed yield stress 250Mpa or equivalent.
2. Nuts, Bolts and Washers mild steel that confirms to IS 1367 property class 4.6.
3. Tolerance in fabrication as per IS 7215.
4. All weldings are 5mm Thk. Unless mentioned otherwise.
5. All welding works shall be confirmed to IS 816 and IS 823 or other equivalent.
6. All weld joints shall be cleaned with brushes and painted with a coat of red oxide.
7. All structures are hot dip galvanized as per BS 729.
WEIGHT CALCULATION OF GANTRY STRUCTURES
Beam
1 L5-leg ISA75x75x5 8 No. 7175 75 5 5.69 40.835 1.866 326.678 6.865 333.54
2 L6-leg ISA75x75x5 12 No. 670 75 5 5.69 3.813 0.174 45.758 0.962 46.72
3 BR16-bracing ISA45x45x5 24 No. 1058 45 5 3.34 3.530 0.275 84.714 3.037 87.75
4 BR17-bracing ISA45x45x5 24 No. 1041 45 5 3.34 3.473 0.271 83.353 2.988 86.34
5 BR18-bracing ISA45x45x5 24 No. 950 45 5 3.34 3.169 0.342 76.067 3.776 79.84
6 BR19-bracing ISA45x45x5 24 No. 950 45 5 3.34 3.169 0.304 76.067 3.356 79.42
7 BR20-bracing ISA45x45x5 24 No. 950 45 5 3.34 3.169 0.247 76.067 2.727 78.79
8 BR21-bracing ISA80x80x6 18 No. 733 80 6 7.25 5.317 0.191 95.701 1.578 97.28
9 BR22-bracing ISA65x65x6 6 No. 800 65 6 5.84 4.672 0.208 28.034 0.574 28.61
9 BR22-bracing ISA45x45x5 24 No. 585 45 5 3.34 1.952 0.152 46.841 1.679 48.52
`
Fittings & Accessories
1 GP-1 gusset plate (128x128x6) 8 No. 128 128 6 0.77 0.099 0.018 0.790 0.066 0.86
2 GP-2 gusset plate (230x128x6) 8 No. 230 128 6 1.39 0.319 0.032 2.551 0.116 2.67
3 GP-3 gusset plate (232x188x6) 8 No. 232 188 6 2.05 0.477 0.046 3.813 0.170 3.98
4 GP-4 gusset plate (250x128x6) 4 No. 250 128 6 1.51 0.377 0.034 1.507 0.063 1.57
5 GP-5 gusset plate (229x125x6) 48 No. 229 125 6 1.35 0.309 0.031 14.820 0.680 15.50
6 GP-6 gusset plate (177x160x6) 12 No. 177 160 6 1.33 0.236 0.030 2.833 0.168 3.00
7 GP-7 gusset plate (299x232x6) 4 No. 299 232 6 3.27 0.977 0.073 3.908 0.134 4.04
8 GP-8 gusset plate (229x140x6) 16 No. 229 140 6 1.51 0.346 0.034 5.533 0.253 5.79
9 GP-9 gusset plate (222x140x6) 8 No. 222 140 6 1.46 0.325 0.033 2.600 0.122 2.72
10 TP-1 top plate (304x304x8) 3 No. 304 304 8 5.80 1.764 0.097 5.293 0.134 5.43
11 CL-1 cleat angle (200x80x10) 12 No. 200 80 10 11.78 2.355 0.052 28.260 0.287 28.55
12 Filler for CL-1 (100x60x2) 12 No. 100 60 2 0.09 0.009 0.006 0.113 0.035 0.15
13 Filler for J-3 (128x50x5) 12 No. 128 50 5 0.25 0.032 0.007 0.386 0.040 0.43
14 CL-4 cleat plate (360x75x6) 12 No. 360 75 6 1.27 0.458 0.030 5.494 0.164 5.66
15 C P -1 37.5mm dia. x 10mm thick 36 No. 38 10 0.09 0.002 3.205 0.030 3.23
16 C P -1 37.5mm dia. x 8mm thick 18 No. 38 8 0.07 0.002 1.282 0.014 1.30
17 C P -1 37.5mm dia. x 5mm thick 12 No. 38 5 0.04 0.001 0.534 0.008 0.54
18 Stiffner in top plate (30x25x5) 12 No. 30 25 5 0.03 0.001 0.001 0.011 0.006 0.02
19 Lightening stud 3 No. 20 250 2.47 0.708 0.016 2.123 0.022 2.14
20 Base plate (300x300x16) 12 No. 300 300 16 11.30 3.391 0.100 40.694 0.551 41.25
21 Stiffner in base plate (100x75x10) 48 No. 100 75 10 0.59 0.059 0.009 2.826 0.206 3.03
22 20mm dia. Anchor bolt 48 No. 20 1000 2.47 2.557 0.063 122.742 1.387 124.13
23 M20 Nut in anchor bolt 96 No. 26 15 0.063 0.001 6.002 0.058 6.06
24 Washer For M20 Nut and Anchor Bolt 48 No. 40 3 0.017 0.001 0.799 0.032 0.83
25 Cleat welded in anchor bolt (70x70x10) 48 No. 70 70 10 0.38 0.027 0.006 1.292 0.141 1.43
26 M16 Bolt 16x50 mm in column 1416 No. 16 70 1.58 0.175 0.004 247.564 2.291 249.86
27 M16 Nut in column 1416 No. 26 15 0.063 0.001 88.524 0.860 89.38
28 Washer For M16 Nut and Bolt in column 1416 No. 27 4 0.018 0.001 25.457 0.492 25.95
29 M16 Bolt 16x50 mm in beam 495 No. 16 70 1.58 0.175 0.004 86.543 0.801 87.34
30 M16 Nut in beam 495 No. 26 15 0.063 0.001 30.946 0.301 31.25
31 Washer For M16 Nut and Bolt in beam 495 No. 30 3 0.007 0.001 3.662 0.195 3.86
32 M16 Foot Bolt 16x180 mm 81 No. 16 200 1.58 0.380 0.010 30.781 0.374 31.16
33 M16 Nut in beam 81 No. 26 15 0.063 0.001 5.064 0.049 5.11
34 Washer For M16 Nut and Bolt in beam 81 No. 30 3 0.007 0.001 0.599 0.032 0.63
Total = 4964.53 kg.
Note:
1. All Steel Plates, Angles confirm to IS 2062 of minimun guaranteed yield stress 250Mpa or equivalent.
2. Nuts, Bolts and Washers mild steel that confirms to IS 1367 property class 4.6.
3. Tolerance in fabrication as per IS 7215.
4. All weldings are 5mm Thk. Unless mentioned otherwise.
5. All welding works shall be confirmed to IS 816 and IS 823 or other equivalent.
6. All weld joints shall be cleaned with brushes and painted with a coat of red oxide.
7. All structures are hot dip galvanized as per BS 729.
WEIGHT CALCULATION OF GANTRY STRUCTURES
Beam
1 L5-leg ISA75x75x5 20 No. 7175 75 5 5.69 40.835 1.866 816.694 17.163 833.86
2 L6-leg ISA75x75x5 24 No. 670 75 5 5.69 3.813 0.174 91.515 1.923 93.44
3 BR16-bracing ISA45x45x5 48 No. 1058 45 5 3.34 3.530 0.275 169.428 6.074 175.50
4 BR17-bracing ISA45x45x5 48 No. 1041 45 5 3.34 3.473 0.271 166.706 5.976 172.68
5 BR18-bracing ISA45x45x5 48 No. 950 45 5 3.34 3.169 0.342 152.133 7.551 159.68
6 BR19-bracing ISA45x45x5 48 No. 950 45 5 3.34 3.169 0.304 152.133 6.712 158.85
7 BR20-bracing ISA45x45x5 48 No. 950 45 5 3.34 3.169 0.247 152.133 5.454 157.59
8 BR21-bracing ISA80x80x6 45 No. 733 80 6 7.25 5.317 0.191 239.253 3.945 243.20
9 BR22-bracing ISA65x65x6 15 No. 800 65 6 5.84 4.672 0.208 70.085 1.435 71.52
9 BR22-bracing ISA45x45x5 60 No. 585 45 5 3.34 1.952 0.152 117.102 4.198 121.30
`
Fittings & Accessories
1 GP-1 gusset plate (128x128x6) 20 No. 128 128 6 0.77 0.099 0.018 1.976 0.165 2.14
2 GP-2 gusset plate (230x128x6) 20 No. 230 128 6 1.39 0.319 0.032 6.378 0.291 6.67
3 GP-3 gusset plate (232x188x6) 20 No. 232 188 6 2.05 0.477 0.046 9.532 0.425 9.96
4 GP-4 gusset plate (250x128x6) 10 No. 250 128 6 1.51 0.377 0.034 3.768 0.158 3.93
5 GP-5 gusset plate (229x125x6) 120 No. 229 125 6 1.35 0.309 0.031 37.050 1.699 38.75
6 GP-6 gusset plate (177x160x6) 24 No. 177 160 6 1.33 0.236 0.030 5.666 0.335 6.00
7 GP-7 gusset plate (299x232x6) 10 No. 299 232 6 3.27 0.977 0.073 9.769 0.334 10.10
8 GP-8 gusset plate (229x140x6) 40 No. 229 140 6 1.51 0.346 0.034 13.832 0.631 14.46
9 GP-9 gusset plate (222x140x6) 20 No. 222 140 6 1.46 0.325 0.033 6.500 0.306 6.81
10 TP-1 top plate (304x304x8) 6 No. 304 304 8 5.80 1.764 0.097 10.586 0.269 10.85
11 CL-1 cleat angle (200x80x10) 24 No. 200 80 10 11.78 2.355 0.052 56.520 0.574 57.09
12 Filler for CL-1 (100x60x2) 24 No. 100 60 2 0.09 0.009 0.006 0.226 0.070 0.30
13 Filler for J-3 (128x50x5) 24 No. 128 50 5 0.25 0.032 0.007 0.772 0.081 0.85
14 CL-4 cleat plate (360x75x6) 24 No. 360 75 6 1.27 0.458 0.030 10.987 0.327 11.31
15 C P -1 37.5mm dia. x 10mm thick 72 No. 38 10 0.09 0.002 6.410 0.060 6.47
16 C P -1 37.5mm dia. x 8mm thick 36 No. 38 8 0.07 0.002 2.564 0.028 2.59
17 C P -1 37.5mm dia. x 5mm thick 24 No. 38 5 0.04 0.001 1.068 0.016 1.08
18 Stiffner in top plate (30x25x5) 24 No. 30 25 5 0.03 0.001 0.001 0.021 0.012 0.03
19 Lightening stud 6 No. 20 250 2.47 0.708 0.016 4.245 0.043 4.29
20 Base plate (300x300x16) 24 No. 300 300 16 11.30 3.391 0.100 81.389 1.102 82.49
21 Stiffner in base plate (100x75x10) 96 No. 100 75 10 0.59 0.059 0.009 5.652 0.413 6.06
22 20mm dia. Anchor bolt 96 No. 20 1000 2.47 2.557 0.063 245.485 2.773 248.26
23 M20 Nut in anchor bolt 192 No. 26 15 0.063 0.001 12.003 0.117 12.12
24 Washer For M20 Nut and Anchor Bolt 96 No. 40 3 0.017 0.001 1.598 0.064 1.66
25 Cleat welded in anchor bolt (70x70x10) 96 No. 70 70 10 0.38 0.027 0.006 2.585 0.283 2.87
26 M16 Bolt 16x50 mm in column 2832 No. 16 70 1.58 0.175 0.004 495.129 4.581 499.71
27 M16 Nut in column 2832 No. 26 15 0.063 0.001 177.048 1.720 178.77
28 Washer For M16 Nut and Bolt in column 2832 No. 27 4 0.018 0.001 50.914 0.983 51.90
29 M16 Bolt 16x50 mm in beam 918 No. 16 70 1.58 0.175 0.004 160.497 1.485 161.98
30 M16 Nut in beam 918 No. 26 15 0.063 0.001 57.391 0.558 57.95
31 Washer For M16 Nut and Bolt in beam 918 No. 30 3 0.007 0.001 6.792 0.361 7.15
32 M16 Foot Bolt 16x180 mm 162 No. 16 200 1.58 0.380 0.010 61.563 0.749 62.31
33 M16 Nut in beam 162 No. 26 15 0.063 0.001 10.128 0.098 10.23
34 Washer For M16 Nut and Bolt in beam 162 No. 30 3 0.007 0.001 1.199 0.064 1.26
Total = 10183.78 kg.
Note:
1. All Steel Plates, Angles confirm to IS 2062 of minimun guaranteed yield stress 250Mpa or equivalent.
2. Nuts, Bolts and Washers mild steel that confirms to IS 1367 property class 4.6.
3. Tolerance in fabrication as per IS 7215.
4. All weldings are 5mm Thk. Unless mentioned otherwise.
5. All welding works shall be confirmed to IS 816 and IS 823 or other equivalent.
6. All weld joints shall be cleaned with brushes and painted with a coat of red oxide.
7. All structures are hot dip galvanized as per BS 729.
WEIGHT CALCULATION OF GANTRY STRUCTURES
Beam
1 L5-leg ISA75x75x5 16 No. 7175 75 5 5.69 40.835 1.866 653.356 13.730 667.09
2 L6-leg ISA75x75x5 20 No. 670 75 5 5.69 3.813 0.174 76.263 1.603 77.87
3 BR16-bracing ISA45x45x5 40 No. 1058 45 5 3.34 3.530 0.275 141.190 5.061 146.25
4 BR17-bracing ISA45x45x5 40 No. 1041 45 5 3.34 3.473 0.271 138.921 4.980 143.90
5 BR18-bracing ISA45x45x5 40 No. 950 45 5 3.34 3.169 0.342 126.778 6.293 133.07
6 BR19-bracing ISA45x45x5 40 No. 950 45 5 3.34 3.169 0.304 126.778 5.594 132.37
7 BR20-bracing ISA45x45x5 40 No. 950 45 5 3.34 3.169 0.247 126.778 4.545 131.32
8 BR21-bracing ISA80x80x6 36 No. 733 80 6 7.25 5.317 0.191 191.403 3.156 194.56
9 BR22-bracing ISA65x65x6 12 No. 800 65 6 5.84 4.672 0.208 56.068 1.148 57.22
9 BR22-bracing ISA45x45x5 48 No. 585 45 5 3.34 1.952 0.152 93.682 3.358 97.04
`
Fittings & Accessories
1 GP-1 gusset plate (128x128x6) 16 No. 128 128 6 0.77 0.099 0.018 1.580 0.132 1.71
2 GP-2 gusset plate (230x128x6) 16 No. 230 128 6 1.39 0.319 0.032 5.103 0.233 5.34
3 GP-3 gusset plate (232x188x6) 16 No. 232 188 6 2.05 0.477 0.046 7.626 0.340 7.97
4 GP-4 gusset plate (250x128x6) 8 No. 250 128 6 1.51 0.377 0.034 3.014 0.126 3.14
5 GP-5 gusset plate (229x125x6) 96 No. 229 125 6 1.35 0.309 0.031 29.640 1.359 31.00
6 GP-6 gusset plate (177x160x6) 20 No. 177 160 6 1.33 0.236 0.030 4.722 0.279 5.00
7 GP-7 gusset plate (299x232x6) 8 No. 299 232 6 3.27 0.977 0.073 7.815 0.267 8.08
8 GP-8 gusset plate (229x140x6) 32 No. 229 140 6 1.51 0.346 0.034 11.065 0.505 11.57
9 GP-9 gusset plate (222x140x6) 16 No. 222 140 6 1.46 0.325 0.033 5.200 0.245 5.44
10 CL-1 cleat angle (200x80x10) 20 No. 200 80 10 11.78 2.355 0.052 47.100 0.478 47.58
11 Filler for CL-1 (100x60x2) 20 No. 100 60 2 0.09 0.009 0.006 0.188 0.058 0.25
12 CL-4 cleat plate (360x75x6) 20 No. 360 75 6 1.27 0.458 0.030 9.156 0.273 9.43
13 C P -1 37.5mm dia. x 10mm thick 60 No. 38 10 0.09 0.002 5.342 0.050 5.39
14 C P -1 37.5mm dia. x 8mm thick 30 No. 38 8 0.07 0.002 2.137 0.023 2.16
15 C P -1 37.5mm dia. x 5mm thick 20 No. 38 5 0.04 0.001 0.890 0.013 0.90
16 Base plate (300x300x16) 20 No. 300 300 16 11.30 3.391 0.100 67.824 0.919 68.74
17 Stiffner in base plate (100x75x10) 80 No. 100 75 10 0.59 0.059 0.009 4.710 0.344 5.05
18 20mm dia. Anchor bolt 80 No. 20 1000 2.47 2.557 0.063 204.571 2.311 206.88
19 M20 Nut in anchor bolt 160 No. 26 15 0.063 0.001 10.003 0.097 10.10
20 Washer For M20 Nut and Anchor Bolt 80 No. 40 3 0.017 0.001 1.332 0.053 1.39
21 Cleat welded in anchor bolt (70x70x10) 80 No. 70 70 10 0.38 0.027 0.006 2.154 0.236 2.39
22 M16 Bolt 16x50 mm in column 2360 No. 16 70 1.58 0.175 0.004 412.607 3.818 416.43
23 M16 Nut in column 2360 No. 26 15 0.063 0.001 147.540 1.433 148.97
24 Washer For M16 Nut and Bolt in column 2360 No. 27 4 0.018 0.001 42.429 0.819 43.25
25 M16 Bolt 16x50 mm in beam 777 No. 16 70 1.58 0.175 0.004 135.846 1.257 137.10
26 M16 Nut in beam 777 No. 26 15 0.063 0.001 48.576 0.472 49.05
27 Washer For M16 Nut and Bolt in beam 777 No. 30 3 0.007 0.001 5.749 0.306 6.05
22 M16 Foot Bolt 16x180 mm 135 No. 16 200 1.58 0.380 0.010 51.302 0.624 51.93
26 M16 Nut in beam 135 No. 26 15 0.063 0.001 8.440 0.082 8.52
27 Washer For M16 Nut and Bolt in beam 135 No. 30 3 0.007 0.001 0.999 0.053 1.05
Total = 8030.74 kg.
Note:
1. All Steel Plates, Angles confirm to IS 2062 of minimun guaranteed yield stress 250Mpa or equivalent.
2. Nuts, Bolts and Washers mild steel that confirms to IS 1367 property class 4.6.
3. Tolerance in fabrication as per IS 7215.
4. All weldings are 5mm Thk. Unless mentioned otherwise.
5. All welding works shall be confirmed to IS 816 and IS 823 or other equivalent.
6. All weld joints shall be cleaned with brushes and painted with a coat of red oxide.
7. All structures are hot dip galvanized as per BS 729.
WEIGHT CALCULATION OF GANTRY STRUCTURES
Note :
1. All Steel Plates, Angles confirm to IS 2062 of minimun guaranteed yield stress 250Mpa or equivalent.
2. Nuts, Bolts and Washers mild steel that confirms to IS 1367 property class 4.6.
3. Tolerance in fabrication as per IS 7215.
4. All weldings are 5mm Thk. Unless mentioned otherwise.
5. All welding works shall be confirmed to IS 816 and IS 823 or other equivalent.
6. All weld joints shall be cleaned with brushes and painted with a coat of red oxide.
7. All structures are hot dip galvanized as per BS 729.
WEIGHT CALCULATION OF GANTRY STRUCTURES
Note :
1. All Steel Plates, Angles confirm to IS 2062 of minimun guaranteed yield stress 250Mpa or equivalent.
2. Nuts, Bolts and Washers mild steel that confirms to IS 1367 property class 4.6.
3. Tolerance in fabrication as per IS 7215.
4. All weldings are 5mm Thk. Unless mentioned otherwise.
5. All welding works shall be confirmed to IS 816 and IS 823 or other equivalent.
6. All weld joints shall be cleaned with brushes and painted with a coat of red oxide.
7. All structures are hot dip galvanized as per BS 729.
WEIGHT CALCULATION OF GANTRY STRUCTURES
132kV CVT
Thickn Surface Zinc @
S.N. Description Qty Unit Dia. Length Breadth/Size Wt/m Wt/No. Wt. Of steel Total Wt Remarks
ess Area 460g/m2
mm mm mm mm kg kg m2 kg kg kg
Column
1 L-1 Leg ISA50x50x5 4 No. 2637 50 5 3.73 9.833 0.527 39.331 0.970 40.30
2 BR-1 B racing ISA40x40x4 20 No. 865 40 4 2.39 2.064 0.138 41.285 1.273 42.56
2 BR-2 B racing ISA50x50x5 8 No. 590 50 5 3.73 2.200 0.118 17.600 0.434 18.03
2 BR-3 B racing ISA50x50x5 8 No. 700 50 5 3.73 2.610 0.140 20.881 0.515 21.40
132kV LA
Thickn Surface Zinc @
S.N. Description Qty Unit Dia. Length Breadth/Size Wt/m Wt/No. Wt. Of steel Total Wt Remarks
ess Area 460g/m2
mm mm mm mm kg kg m2 kg kg kg
Column
1 L-1 Leg ISA50x50x5 4 No. 3022 50 5 3.73 11.268 0.604 45.073 1.112 46.19
2 BR-1 B racing ISA40x40x4 20 No. 685 40 4 2.39 1.635 0.110 32.694 1.008 33.70
2 BR-2 B racing ISA50x50x5 8 No. 340 50 5 3.73 1.268 0.068 10.142 0.250 10.39
2 BR-3 B racing ISA50x50x5 8 No. 450 50 5 3.73 1.678 0.090 13.424 0.331 13.75
132kV PI
Thickn Surface Zinc @
S.N. Description Qty Unit Dia. Length Breadth/Size Wt/m Wt/No. Wt. Of steel Total Wt Remarks
ess Area 460g/m2
mm mm mm mm kg kg m2 kg kg kg
Column
1 L-1 Leg ISA50x50x5 4 No. 3407 50 5 3.73 12.704 0.681 50.815 1.254 52.07
2 BR-1 B racing ISA40x40x4 20 No. 873 40 4 2.39 2.083 0.140 41.667 1.285 42.95
2 BR-2 B racing ISA50x50x5 8 No. 540 50 5 3.73 2.014 0.108 16.108 0.397 16.51
2 BR-3 B racing ISA50x50x5 8 No. 650 50 5 3.73 2.424 0.130 19.390 0.478 19.87
Beam
1 L7 Leg ISA65x65x6 4 No. 5334 65 6 5.84 31.153 1.387 124.611 2.552 127.16
2 BR5-bracing ISA50x50x5 8 No. 776 50 5 3.73 2.894 0.202 23.148 0.742 23.89
3 BR6-bracing ISA50x50x5 8 No. 818 50 5 3.73 3.050 0.213 24.401 0.783 25.18
3 BR7-bracing ISA50x50x5 16 No. 920 50 5 3.73 3.430 0.239 54.887 1.761 56.65
4 BR8-bracing ISA75x75x6 9 No. 665 75 6 6.78 4.510 0.173 40.593 0.716 41.31
5 BR9-bracing ISA50x50x5 3 No. 666 50 5 3.73 2.483 0.173 7.450 0.239 7.69
5 BR10-bracing ISA50x50x5 12 No. 498 50 5 3.73 1.857 0.129 22.283 0.715 23.00
Note:
1. All Steel Plates, Angles confirm to IS 2062 of minimun guaranteed yield stress 250Mpa or equivalent.
2. Nuts, Bolts and Washers mild steel that confirms to IS 1367 property class 4.6.
3. Tolerance in fabrication as per IS 7215.
4. All weldings are 5mm Thk. Unless mentioned otherwise.
5. All welding works shall be confirmed to IS 816 and IS 823 or other equivalent.
6. All weld joints shall be cleaned with brushes and painted with a coat of red oxide.
7. All structures are hot dip galvanized as per BS 729.
WEIGHT CALCULATION OF GANTRY STRUCTURES
Beam
1 L7 Leg ISA65x65x6 8 No. 5334 65 6 5.84 31.153 1.387 249.222 5.104 254.33
2 BR5-bracing ISA50x50x5 16 No. 776 50 5 3.73 2.894 0.202 46.296 1.485 47.78
3 BR6-bracing ISA50x50x5 16 No. 818 50 5 3.73 3.050 0.213 48.802 1.565 50.37
3 BR7-bracing ISA50x50x5 32 No. 920 50 5 3.73 3.430 0.239 109.774 3.521 113.30
4 BR8-bracing ISA75x75x6 18 No. 665 75 6 6.78 4.510 0.173 81.185 1.432 82.62
5 BR9-bracing ISA50x50x5 6 No. 666 50 5 3.73 2.483 0.173 14.900 0.478 15.38
5 BR10-bracing ISA50x50x5 24 No. 498 50 5 3.73 1.857 0.129 44.566 1.429 46.00
Note:
1. All Steel Plates, Angles confirm to IS 2062 of minimun guaranteed yield stress 250Mpa or equivalent.
2. Nuts, Bolts and Washers mild steel that confirms to IS 1367 property class 4.6.
3. Tolerance in fabrication as per IS 7215.
4. All weldings are 5mm Thk. Unless mentioned otherwise.
5. All welding works shall be confirmed to IS 816 and IS 823 or other equivalent.
6. All weld joints shall be cleaned with brushes and painted with a coat of red oxide.
7. All structures are hot dip galvanized as per BS 729.
WEIGHT CALCULATION OF GANTRY STRUCTURES
33kV CT
Thickn Surface Zinc @
S.N. Description Qty Unit Dia. Length Breadth/Size Wt/m Wt/No. Wt. Of steel Total Wt Remarks
ess Area 460g/m2
mm mm mm mm kg kg m2 kg kg kg
Column
1 L-1 Leg ISA50x50x5 4 No. 2422 50 5 3.73 9.031 0.484 36.124 0.891 37.02
2 BR-1 B racing ISA40x40x4 20 No. 546 40 4 2.39 1.303 0.087 26.059 0.804 26.86
2 BR-2 B racing ISA50x50x5 8 No. 290 50 5 3.73 1.081 0.058 8.651 0.213 8.86
2 BR-3 B racing ISA50x50x5 8 No. 400 50 5 3.73 1.492 0.080 11.932 0.294 12.23
33kV PT
Thickn Surface Zinc @
S.N. Description Qty Unit Dia. Length Breadth/Size Wt/m Wt/No. Wt. Of steel Total Wt Remarks
ess Area 460g/m2
mm mm mm mm kg kg m2 kg kg kg
Column
1 L-1 Leg ISA50x50x5 4 No. 2082 50 5 3.73 7.763 0.416 31.053 0.766 31.82
2 BR-1 B racing ISA40x40x4 16 No. 568 40 4 2.39 1.355 0.091 21.688 0.669 22.36
2 BR-2 B racing ISA50x50x5 8 No. 290 50 5 3.73 1.081 0.058 8.651 0.213 8.86
2 BR-3 B racing ISA50x50x5 8 No. 400 50 5 3.73 1.492 0.080 11.932 0.294 12.23
33kV LA
Thickn Surface Zinc @
S.N. Description Qty Unit Dia. Length Breadth/Size Wt/m Wt/No. Wt. Of steel Total Wt Remarks
ess Area 460g/m2
mm mm mm mm kg kg m2 kg kg kg
Column
1 L-1 Leg ISA50x50x5 4 No. 2398 50 5 3.73 8.942 0.480 35.766 0.882 36.65
2 BR-1 B racing ISA40x40x4 20 No. 546 40 4 2.39 1.303 0.087 26.059 0.804 26.86
2 BR-2 B racing ISA50x50x5 8 No. 290 50 5 3.73 1.081 0.058 8.651 0.213 8.86
2 BR-3 B racing ISA50x50x5 8 No. 400 50 5 3.73 1.492 0.080 11.932 0.294 12.23
33kV PI
Thickn Surface Zinc @
S.N. Description Qty Unit Dia. Length Breadth/Size Wt/m Wt/No. Wt. Of steel Total Wt Remarks
ess Area 460g/m2
mm mm mm mm kg kg m2 kg kg kg
Column
1 L-1 Leg ISA50x50x5 4 No. 2972 50 5 3.73 11.082 0.594 44.327 1.094 45.42
2 BR-1 B racing ISA40x40x4 20 No. 646 40 4 2.39 1.542 0.103 30.832 0.951 31.78
2 BR-2 B racing ISA50x50x5 8 No. 290 50 5 3.73 1.081 0.058 8.651 0.213 8.86
2 BR-3 B racing ISA50x50x5 8 No. 400 50 5 3.73 1.492 0.080 11.932 0.294 12.23
Beam
1 L7 Leg ISA65x65x6 4 No. 5334 65 6 5.84 31.153 1.387 124.611 2.552 127.16
2 BR5-bracing ISA50x50x5 8 No. 776 50 5 3.73 2.894 0.202 23.148 0.742 23.89
3 BR6-bracing ISA50x50x5 8 No. 818 50 5 3.73 3.050 0.213 24.401 0.783 25.18
3 BR7-bracing ISA50x50x5 16 No. 920 50 5 3.73 3.430 0.239 54.887 1.761 56.65
4 BR8-bracing ISA75x75x6 9 No. 665 75 6 6.78 4.510 0.173 40.593 0.716 41.31
5 BR9-bracing ISA50x50x5 3 No. 666 50 5 3.73 2.483 0.173 7.450 0.239 7.69
5 BR10-bracing ISA50x50x5 12 No. 498 50 5 3.73 1.857 0.129 22.283 0.715 23.00
Note:
1. All Steel Plates, Angles confirm to IS 2062 of minimun guaranteed yield stress 250Mpa or equivalent.
2. Nuts, Bolts and Washers mild steel that confirms to IS 1367 property class 4.6.
3. Tolerance in fabrication as per IS 7215.
4. All weldings are 5mm Thk. Unless mentioned otherwise.
5. All welding works shall be confirmed to IS 816 and IS 823 or other equivalent.
6. All weld joints shall be cleaned with brushes and painted with a coat of red oxide.
7. All structures are hot dip galvanized as per BS 729.
WEIGHT CALCULATION OF GANTRY STRUCTURES
Note :
1. All Steel Plates, Angles confirm to IS 2062 of minimun guaranteed yield stress 250Mpa or equivalent.
2. Nuts, Bolts and Washers mild steel that confirms to IS 1367 property class 4.6.
3. Tolerance in fabrication as per IS 7215.
4. All weldings are 5mm Thk. Unless mentioned otherwise.
5. All welding works shall be confirmed to IS 816 and IS 823 or other equivalent.
6. All weld joints shall be cleaned with brushes and painted with a coat of red oxide.
7. All structures are hot dip galvanized as per BS 729.