Professional Documents
Culture Documents
Technical Requirements
Technical Requirements
Page 1
Technical requirements
The technical requirements detailed below are specifically
for an automatic palletizing line.
1. Electrical installation
• Hose: 5x10 mm.
https://translate.googleusercontent.com/translate_f 1/11
17/12/21 13:47 Technical requirements
one
Page 2
2. Internet installation
► You cannot disconnect or change the IP's without prior notice to IN-tec.
https://translate.googleusercontent.com/translate_f 2/11
17/12/21 13:47 Technical requirements
► The total distance of the connection cable must be up to the start of the
ribbed tape / honeycomb plus 5 meters plus extra to connect
the cable to the relevant junction box.
two
Page 3
• Clean and dry compressed air (3-4-4 according to ISO 8573-1: 2010)
https://translate.googleusercontent.com/translate_f 3/11
17/12/21 13:47 Technical requirements
• The general pipe must be greater than or equal to DN15 (1/2 ”).
Page 4
https://translate.googleusercontent.com/translate_f 4/11
17/12/21 13:47 Technical requirements
https://translate.googleusercontent.com/translate_f 5/11
17/12/21 13:47 Technical requirements
Page 5
• You can only use the machines with the permission of the technicians
by IN-tec.
• The handling of all machinery external to IN-tec will be the responsibility
the client's.
https://translate.googleusercontent.com/translate_f 6/11
17/12/21 13:47 Technical requirements
Page 6
• Boom truck (minimum 8000kg) with 3 axles. Except for the exclusive request of IN-tec, the truck
The boom may not be a "self-supporting crane".
https://translate.googleusercontent.com/translate_f 7/11
17/12/21 13:47 Technical requirements
Page 7
https://translate.googleusercontent.com/translate_f 8/11
17/12/21 13:47 Technical requirements
Page 8
• In the event of a need for a replacement, the customer must provide the necessary contacts
to locate them and if necessary the transport would also be in charge of the client.
9. Penalties
• In the case of not complying with any of the points stated above,
all expenses will be invoiced by administration.
• In the event that the assembly is not carried out in a period of one week per
reasons external to IN-tec, the expenses will be invoiced by administration.
Page 9
https://translate.googleusercontent.com/translate_f 10/11
17/12/21 13:47 Technical requirements
GERARD SALVIA
https://translate.googleusercontent.com/translate_f 11/11