The document is a hardness test report for a forged flange adapter. It provides details of the customer, part number, material, heat number, drawing, ambient temperature, required hardness range, test method, equipment used, load applied, penetrator type, calibration details, procedure followed, and test results. The 50 pieces tested were within the specified hardness range of 260-310 HBW.
The document is a hardness test report for a forged flange adapter. It provides details of the customer, part number, material, heat number, drawing, ambient temperature, required hardness range, test method, equipment used, load applied, penetrator type, calibration details, procedure followed, and test results. The 50 pieces tested were within the specified hardness range of 260-310 HBW.
The document is a hardness test report for a forged flange adapter. It provides details of the customer, part number, material, heat number, drawing, ambient temperature, required hardness range, test method, equipment used, load applied, penetrator type, calibration details, procedure followed, and test results. The 50 pieces tested were within the specified hardness range of 260-310 HBW.
P.O. No.:- 4500641421 Line Item: 00010 PO Date : 18.08.2022 Date : 23.08.2022 Item : FLANGE ADAPTER FORGING, FORGED Material : AISI 4340 Part No.: P560250 Rev C Heat No. : N825079 Drawing No.: DU500037149 Rev B Ambient Temp : 27°C Die No.: 1447 Hardness Range:- 260-310 HBW Qty.: 50 Nos. Test Method : Brinell Hardness Test Vendor Sr.No.: - Equipment Used: Deep Throat Hardness Tester HT Load No.: N CX-528 QT CX-529 Sr No. 2015/01 Reference Standard: ASTM E10 DT CX-530 B Machine Make: FSA Load Applied: 3000 Kgs Calibration Agency: SME Cal Center Type of Penetrator: Dia 10 mm Carbide Ball Certificate No.: SME/22/183 Std Block Details: SH-2192/22 (Hardness value -291.0 HBW) Calibrated On: 14.01.2022 Entity Performing Test: WIF Sanaswadi Calibrated Due On:13.01.2023 Hardness Q03006 Rev. AC / Q03009 Rev. X Date of Test :- 02, 04 & 05.08.2022 Procedure :- Precise Measuring Method of HBW Impression : Type B : Hand-Held Microscope with fixed measuring lines.
Sr. No. Hardness in HBW Sr. No. Hardness in HBW Sr. No. Hardness in HBW Sr. No. Hardness in HBW 50 Nos 269-302 HBW