Professional Documents
Culture Documents
4
07: 01/2 666
/ 4
5
SEN 6:23+ 0
© 2 R280 03:00
024 8
2. Loosen clamps (2) and slide hose (1) on to pipe (3).
Cat
3. Remove four bolts and pipe (3) from the cylinder head. Remove gasket (5) and water
temperature regulator (4).
erp
illa
NOTICE
rI nc.
If the water temperature regulator is installed wrong, it will
cause the engine to overheat. Make sure the vent hole is open
and do not use liquid gasket material on the gasket. The
cylinder head can be damaged if the vent hole is not open or if
the gasket is installed wrong.
5. Put pipe (3) in position on the cylinder head, with the plug toward the front of the engine. Install
the bolts that hold it.
6. Put hose (1) in position, and tighten clamps (2). Fill the cooling system with coolant to the correct
level. See the Maintenance Guide.
PIP-10464666
2024/01/20
07:56:17+03:00
https://sis2.cat.com/#/print-preview/service/151708f8-c687-444a-9f9a-811f3db415ae 1/2
1/20/24, 10:56 AM SIS 2.0
SENR28080051
© 2024 Caterpillar Inc.
https://sis2.cat.com/#/print-preview/service/151708f8-c687-444a-9f9a-811f3db415ae 2/2