The document contains calculations for designing purlins to support roofing on a main shed and tower at different levels. It calculates loads from roofing material, live loads, and wind for purlins spaced 1.306m, 1.173m, and 1.09m. Required section modulus, provided section, bending moment, and deflection are calculated for each purlin. A 250x2.55mm Z purlin is selected since calculations show it meets requirements.
The document contains calculations for designing purlins to support roofing on a main shed and tower at different levels. It calculates loads from roofing material, live loads, and wind for purlins spaced 1.306m, 1.173m, and 1.09m. Required section modulus, provided section, bending moment, and deflection are calculated for each purlin. A 250x2.55mm Z purlin is selected since calculations show it meets requirements.
The document contains calculations for designing purlins to support roofing on a main shed and tower at different levels. It calculates loads from roofing material, live loads, and wind for purlins spaced 1.306m, 1.173m, and 1.09m. Required section modulus, provided section, bending moment, and deflection are calculated for each purlin. A 250x2.55mm Z purlin is selected since calculations show it meets requirements.
Spacing of the purlin = 1.306m Galvanized sheet wt = 0.1 kn/m2 Live load =0.75 kn/m2 (non-accessible roof) Load on the purlin = 1.306X0.10= 0.1306 kn/m (ROOF SHEET) Load on the purlin = 1.306X0.75= 0.97 kn/m (live load) Self-weight of the purlin = 0.075 kn/m Wind load on the purlin = 1.306x1.77 = 2.311 kn/m Total load on the purlin =2.311 -0.1306-0.075=2.1054 kn/m (DL+WL) Total load on the purlin =0.075+0.1306+0.97 = 1.175 kn/m (DL+LL) Max. BM = wl2/8 = 13.83 Kn-m Section modulus = Z req =13.83X10^6/0.66X345 =60737 mm3 (Where 345 is grade of steel, Zreq = section modulus*0.66) Provided 67540 mm3 hence it is ok.
Check for deflection:
Allowable deflection = 7250/150 = 48.33 mm (as per table no:6 of IS800:2007 max deflection for elastic cladding is L/150) Actual deflection = (5/384) x (WL^4/EI) (5/384) (2.1x7250^4)/2x10^5x822.32x10^4 = 45.93 ---Hence ok Provide Z purlin 250X2.55thk DESIGN OF PURLINS FOR TOWER ROOF @28m lvl
Length of the purlin = 7.0m
Spacing of the purlin = 1.173 Galvanized sheet wt = 0.1 kn/m2 Live load =0.75 kn/m2 (non-accessible roof) Load on the purlin = 1.173X0.10= 0.1173 kn/m (ROOF SHEET) Load on the purlin = 1.173X0.75= 0.88 kn/m (live load) Self-weight of the purlin = 0.075kn/m Wind load on the purlin = 1.173x2.12 = 2.48 kn/m Total load on the purlin =2.48 -0.1173-0.075=2.287 kn/m (DL+WL) Total load on the purlin =0.075+0.1173+0.88 = 1.07 kn/m (DL+LL) Max. BM = wl2/8 =(2.287*7*7)/8 = 14 Kn-m Section modulus = Z req =14X10^6/0.66X345 =61484 mm3 (Where 345 is grade of steel, Zreq = section modulus*0.66) Provided 67540 mm3 hence it is ok.
Check for deflection:
Allowable deflection = 7000/150 = 46.6 mm (as per table no:6 of IS800:2007 max deflection for elastic cladding is L/150) Actual deflection = (5/384) x (WL^4/EI) (5/384) (2.287x7000^4)/2x10^5x822.32x10^4 = 43.47 mm - Hence ok Provide Z purlin 250X2.55thk DESIGN OF PURLINS FOR TOWER ROOF @44m lvl
Length of the purlin = 7.0 m
Spacing of the purlin = 1.09m Load on the purlin = 1.09X0.10= 0.109 kn/m (ROOF SHEET) Load on the purlin = 1.08X0.75= 0.8175 kn/m (live load) Self-weight of the purlin = 0.075kn/m Wind load on the purlin = 1.09x2.25 = 2.45 kn/m Total load on the purlin =2.45 -0.109-0.075=2.266 kn/m (DL+WL) Total load on the purlin =0.075+0.108+0.8175 = 1.003 kn/m (DL+LL) Max. BM = wl2/8 = 13.8 Kn-m Section modulus = Z req =13.8X10^6/0.66X345 =60606 mm3 (Where 345 is grade of steel, Zreq = section modulus*0.66) Provided 67540 mm3 hence it is ok.
Check for deflection:
Allowable deflection = 7000/150= 46.66 mm (as per table no:6 of IS800:2007 max deflection for elastic cladding is L/150) Actual deflection = (5/384) x (WL^4/EI) (5/384) (1.273x7000^4)/2x10^5x822.32x10^4 = 42.96 mm ---Hence ok Provide Z purlin 250X2.55thk