This document outlines critical controls for working at heights to eliminate or minimize risks of fatalities, injuries, and events. The controls include: 1) identifying working-at-heights activities during planning; 2) assessing ground conditions for elevated work platforms; and 3) verifying equipment and operators are fit for purpose. Additional controls address permits, rescue plans, barriers, and managing penetrations. The intent is to prevent falls and dropped objects during elevated work.
This document outlines critical controls for working at heights to eliminate or minimize risks of fatalities, injuries, and events. The controls include: 1) identifying working-at-heights activities during planning; 2) assessing ground conditions for elevated work platforms; and 3) verifying equipment and operators are fit for purpose. Additional controls address permits, rescue plans, barriers, and managing penetrations. The intent is to prevent falls and dropped objects during elevated work.
This document outlines critical controls for working at heights to eliminate or minimize risks of fatalities, injuries, and events. The controls include: 1) identifying working-at-heights activities during planning; 2) assessing ground conditions for elevated work platforms; and 3) verifying equipment and operators are fit for purpose. Additional controls address permits, rescue plans, barriers, and managing penetrations. The intent is to prevent falls and dropped objects during elevated work.
INTENT: To eliminate or minimise the risks • Working-at-heights activities
are identified at the work and lockouts to prevent entry by persons are of fatalities, injuries and events arising from planning stage. installed directly beneath and immediately adjacent working at height and using elevated work • Ground conditions are to areas where work is assessed for EWP operations. occurring above. platforms. Working at Heights is defined as • Fall and edge protection equipment is fit for use. • Permit to Work in place to manage removal of works where the requirement exists to wear • EWP (including scissor lift) permanent guardrails and grid mesh. a fall arrest/restraint harness. operators are verified as competent for specific items • Operation of plant used for of plant. work at heights is effectively • Personnel working at heights managed i.e. EWP, scissor are trained and competent. lift, mast climbers, swing stage etc. • A Working at Heights Permit is in place when there is a • A rescue plan for working at likelihood of a fall and risk of heights is in place and harm to personnel. resources are available.
• Controls such as lanyards, • Anchor points and barriers
screens and barriers are in used during working at place to prevent and heights are fit for purpose. manage dropped objects. • Penetrations are effectively • Physical barriers, barricading managed.
Go, No Go or No Go (IR) Immediate Rectification
Use these prompts to discuss the Critical Controls for each fatal and severe risk and how they relate to your work area.