This document is a portable electrical equipment inspection checklist used by Kolin Construction for projects 6600042398 and 6600041347. It lists components of plugs, leads, and tool bodies that inspectors should check for faults such as loose fasteners, unauthorized repairs, damage, improper functioning of safety devices, and more. Inspectors are to note any failures or issues found on the checklist.
This document is a portable electrical equipment inspection checklist used by Kolin Construction for projects 6600042398 and 6600041347. It lists components of plugs, leads, and tool bodies that inspectors should check for faults such as loose fasteners, unauthorized repairs, damage, improper functioning of safety devices, and more. Inspectors are to note any failures or issues found on the checklist.
This document is a portable electrical equipment inspection checklist used by Kolin Construction for projects 6600042398 and 6600041347. It lists components of plugs, leads, and tool bodies that inspectors should check for faults such as loose fasteners, unauthorized repairs, damage, improper functioning of safety devices, and more. Inspectors are to note any failures or issues found on the checklist.
Ajal Home Ownership Site Development Increment II :PROJECT NAME
Package 1 & 2 6600042398 & 6600041347 :.CONTRACTOR NO Kolin Construction Tourism Industry and Trading Co. :COMPANY NAME .Inc
Date: COMPANY NAME:
TOOL/EQUIPMENT TYPE
FAIL PASS CONDITION/FAULT TO BE CHECKED COMPONENT
Check tightness of conductor fastener screws
Check security of weatherproof ferrule Connection weatherproof Plug Check condition of terminals Check terminal has not been modified. Check for cuts through outer covering Check for unauthorized repairs (Taped over damage) Check for exposed conductor leads Check for weatherproof plugs Check seal to plug Check for heat, cut or crush damage Lead Check polarity of conductors Check continuity of conductors and ground Check resistance Ohms Maximum length less than 30.0m
Check for damage to casing
Check condition and operation of safety guards Check operation of on - off switch (dead man safety) Check operation of safety devices Tool Body Check condition of terminals Check condition and security of handle Check condition of chuck and chuck key
Checked by :
_______________________ Competent Person Name & Emp. ID