Professional Documents
Culture Documents
Keys:
Calculation: Risk (R) = (L) x (S) SEVERITY OF INJURY (S) PRE/POST PERSONS AT RISK
CONTROLRISK RATING
LIKELIHOOD OF HARM (L) Minor (1) Serious (2) Major (3)
Unlikely (1) 1 2 3 L = LOW E-Employees V-Visitors
Possible (2) 2 4 6 M = MEDIUM C-Contractors P-Public
Likely (3) 3 6 9 H = HIGH
1. Working Electric Shock E,C H Only competent, trained persons to work with electricity. M
with Electricity
Electrocution Access and egress arrangements to be determined prior to commencement of work.
Burns Access to the work area must be restricted to authorised persons only.
Fire Disconnection and Isolation procedures to be followed at all times. (See H&S Policy)
Lock devices to be used to prevent energisation of the installation.
Notices posted warning that installation work in progress and prohibiting energisation.
Electricity supply must be isolated and proved to be dead. NO LIVE WORKING.
All drawings and specifications required are at hand and understood.
All persons involved in the job are fully aware of the hazards and the safety precautions that
must be taken.
Other hazards must be considered and appropriate control measures put in place.
Reference should be made to the risk assessment for the access method used.
Only use 110v or battery operated power tools to be used on site.
© SM&MS Limited
Task Specific Risk Assessment Date: October 2022
© SM&MS Limited
Task Specific Risk Assessment Date: October 2022
Public access POST SIGNS TO ACCESS DOORS AND LOCK AT ALL TIMES
Electrocution PROVE ‘DEAD’ AND LOCK OFF ALL POTENTIAL POWER SUPPLIES.
I confirm that residual risks are acceptable and controls listed above have implemented in full (To be signed by CRB Services)
Name: Graeme Winterburn Signature: Job Title: Director Date: 10 October 2022
This risk assessment should be reviewed on an annual basis to take account of changes in working practices, equipment, staff etc. The assessment should also be reviewed if
there are any significant changes or any reason to believe that it may be invalid.
© SM&MS Limited