Professional Documents
Culture Documents
DN252039827
Issue 01
This document includes Nokia proprietary and condential information, which may not be
distributed or disclosed to any third parties without the prior written consent of Nokia. This
document is intended for use by Nokia’s customers (“You”/”Your”) in connection with a
product purchased or licensed from any company within Nokia Group of Companies. Use this
document as agreed. You agree to notify Nokia of any errors you may nd in this document;
however, should you elect to use this document for any purpose(s) for which it is not
intended, You understand and warrant that any determinations You may make or actions
You may take will be based upon Your independent judgment and analysis of the content of
this document.
Nokia reserves the right to make changes to this document without notice. At all times, the
controlling version is the one available on Nokia’s site.
NO WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO
ANY WARRANTY OF AVAILABILITY, ACCURACY, RELIABILITY, TITLE, NON-INFRINGEMENT,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS MADE IN RELATION TO THE
CONTENT OF THIS DOCUMENT. IN NO EVENT WILL NOKIA BE LIABLE FOR ANY DAMAGES,
INCLUDING BUT NOT LIMITED TO SPECIAL, DIRECT, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL OR ANY LOSSES, SUCH AS BUT NOT LIMITED TO LOSS OF PROFIT,
REVENUE, BUSINESS INTERRUPTION, BUSINESS OPPORTUNITY OR DATA THAT MAY ARISE
FROM THE USE OF THIS DOCUMENT OR THE INFORMATION IN IT, EVEN IN THE CASE OF
ERRORS IN OR OMISSIONS FROM THIS DOCUMENT OR ITS CONTENT.
© 2022 Nokia.
1.1 Benefits
The operator can perform downlink inter-cell interference related tests in field without UE.
The BTS transmits PDCCH dummy data (a pseudo random bit sequence) on resource
elements not allocated by the downlink scheduler. The dummy data is sent on all configured
antennas, for example single or two antennas. The power spectral density of the dummy
data is the same as for the PDCCH. The resource elements for the dummy data are
randomly selected on layer 1. The modulation scheme for the dummy data is Quadrature
Phase Shift Keying (QPSK).
The interference level (percentage of PDCCH resource elements used by normal users and
dummy data) is operator-configurable. The downlink scheduler is not limited by this setting
(it can allocate data as well above the interference level). Dummy data is only added if there
are not enough resource elements allocated to normal users.
The operator can activate or deactivateInter cell load generation for PDCCH by setting the
parameter actPdcchLoadGen to True or False accordingly. If actPdcchLoadGen is set to
True, pdcchLoadLevel and pdcchLoadPsdOffset parameters must be configured.
The PSD offset for dummy PDCCH (pdcchLoadPsdOffset) parameter defines the
dummy PDCCH PSD offset to flat Power Spectral Density (PSD). Maximum dummy PDCCH
PSD is calculated based on flat PSD and this offset. If there is not enough power remaining
for dummy PDCCHs, the smaller dummy PDCCH PSD is used.
Impact on interfaces
This feature has no impact on interfaces.
For reference data descriptions, see Single RAN System/SRAN Reference Data
Requirements
FDD TDD
Alarms
There are no alarms related to the LTE1111: Inter cell load generation for PDCCH feature.
Parameters
Sales information
See Configuring features with BTS Site Manager or Configuring features with Web Element
Manager for general management tool instructions.
Procedure
1 Start configuring the parameters.
Procedure
1 Start configuring the parameters.