Service Information Subject: New Display for OptiView Control Panel
Background: Beginning from Sep.26th, 2013, the display of OptiView control panels has been upgraded.
Differences between The Old and New Displays:
The P/N of display kit remains the same as 331-01771-000. New style of display does not have inverter board. Its connection and jumper configuration have some changes. Please see table 1.
Table 1 Summary of Differences
NEW STYLE OLD STYLE
Display 031-03441-000 1PCS 031-02886-000 1PCS Inverter Board No inverter board 031-02889-000 1PCS Components Inverter Cable 031-01770-005 1PCS 031-01770-004 1PCS Display Label 035-15923-007 1PCS 035-15923-006 1PCS Inverter cable is connected Inverter cable is connected from Connection from J6 of micro-board to CN2 J6 of micro-board to J1 of inverter of display. board. Jumper JP4 – 1 & 2 JP4 – 2 & 3 Configuration
Attentions on Display Replacement:
1. For an early chiller, if its display is to be replaced, its inverter cable also needs to be changed at the same time. The inverter cable is connected from J6 of micro-board to CN2 of display. Please see figure 1.
YORK(Wuxi) Air Conditioning & Refrigeration Co., Ltd. 1
J6 of Micro-board
CN2 of Display
Fig. 1 Connection of Inverter Cable
2. For new display, the jumper position of JP4 on micro-board is different from that of old display. Please refer to figure 2. After the new display is installed, please position the jumper of JP4 between 1 and 2. If the jumper is improperly positioned, dark screen will occur.
New Display Old Display
Fig. 2 Jumper Configuration of Two Styles 3. A display kit 331-01771-000 will come with a jumper instruction label. If you separately replace the old style of display with a new style 031-03441-000, we suggest you replacing the label into 035-15923-007 together to avoid any mistake of jumper setting in future.
YORK(Wuxi) Air Conditioning & Refrigeration Co., Ltd. 2