Professional Documents
Culture Documents
No Description Statement of
Compliance
(1) (2) (3)
1. INTRODUCTION
1.1 System shall provide inter-operability of hardware, OS, software,
networking, printing, database connectivity, reporting, and
Complied
communication protocols. System expansion shall be possible through
off-the-shelf available hardware.
1.2 The equipment offered shall be compact, fully solid state highly reliable
Complied
and shall use latest state of the art technology.
1.3 The equipment offered shall be designed for continuous operation (24-
hours a day and 365-days a year). The design life of the equipment
shall be a minimum of SIX YEARS. This life shall achievable through Complied
normal and regular periodic maintenance during the period of
Warranty and Comprehensive AMC.
1.4 Equipment with better or higher technical specifications shall be
accepted. Complied
Note: -Original Equipment Manufacturer (OEM) of Cameras, Servers,
Storage (NAS/SAN) box, Workstations, Monitors, UPS and Switches
shall be ISO firms & the offered products must be certified for Complied
Safety, Electrical and Emission of International standards such as
CE/EN/UL/FCC/ROHS/BIS etc.
1.5 The equipment offered by the bidder shall be of standard and
Complied
reputed branded make.
1.6 All offered equipment shall be manufactured to withstand
continuous operation safely without undue heating, vibration, wear, Complied
corrosion, electromagnetic interference or any similar problems.
1.7 System architecture shall be open for future expansion. Complied
1.8 System shall be provided with servers configured to operate in
Automatic Failover changeover mode without any need of any
Complied
manual intervention. During change over there shall be not be any
TECHNICAL SPECIFICATIONS:
SWITCH HARDWARE
Switch with at least 4 X 10/100/1000 RJ-45 PoE+ Gigabit Ethernet
Complied
Ports and 2 x 1G SFP Ports.
Switching capacity should be 12 Gbps or higher or non-blocking
Complied
architecture.
Flexibility in power supply of AC/DC Complied
Support for redundant power supply is must, should be quoted
Complied
with 2 power supplies from day1.
POE budget of 120 watts for utilizing all ports on 802.3at
Complied
standard(30Watts)
Switch packet forwarding rate should be 8 Mbps or higher or non-
Complied
blocking architecture.
Switch should support ACL for L2-L4 types. Complied
Switch should be standard 19 inch 1U rack mountable. Complied
SOFTWARE FUNCTIONALITY Complied
Proposed switch shall support min 16K MAC addresses Complied
Support for the Energy Efficient Ethernet (IEEE 802.3az) standard. Complied
Proposed switch shall be stackable with support for at least 8
Complied
switches in a stack for future ease of management
Should support Head of Line blocking prevention for lower latency
Complied
and better performance.
Support Jumbo Frame up to 9K Bytes or higher Complied
Should have 802.1D STP, 802.1w RSTP and 802.1s MSTP Spanning
Complied