Professional Documents
Culture Documents
+6 מלל+Beemed
+6 מלל+Beemed
13.5 X 0.2 X 0.45 = 1.22 / ולכן עומס הבלוק על הקורה למ"א ,הינו:
25 X 0.2 X 0.1= 0.5 / ולכן עומס החגורה על הקורה למ"א ,הינו :
חישוב טיח :טיח ,מחושב לגובה המעקה משתי צדדיו בעובי של 2ס"מ מכל צד +.טיח לגובה הקורות.
0.4 / משקל הטיח ע"פ ת"י 109טבלה ) 15בעובי 20מ"מ( הינו:
(0.4 X 1.35 ) X 2 + 0.4 X 1.05 X 2 = 1.92 / ולכן עומס טיח על הקורה למ"א הינו:
חישוב טופינג :לעובי של 5ס"מ עם בליטה מעובי הקיר 5ס"מ לכל צד.
14
משקל נוסף להעמסה רק עבור קורת הקפיות שאינם נושאות
נעמיס עומס Fserתקרה מחצי מודול ,אשר מועמס על הקורות בהיקף שאינן נושאות) .העומסים אופיינים(.
3.45 0.65
עצמי 1. 12 kn/m
2
2.68 0.65
∆ . kn/m
2
1.5 0.65
. kn/m
2
וכמו כן ,נוסף עומס של הבטון בין הבלוק לקורה ,בהתאמה להרחבת הבטון באותו איזור.
G = 25X0.05X0.24 = 0.3 KN/Mבטון ← על קורות ק 1-ו ק 2-נוסף עומס בטון לפי רווח של 5ס"מ:
G = 25X0.1X0.24 = 0.6 KN/Mבטון ← על קורה ק 3-נוסף עומס בטון לפי רווח של 10ס"מ:
* כמו"כ הקורות יורדות עד לגובה של סוף החלון ) ,(+5.21ואין צורך בחגורה עליונה מעל הפתחים.
}אם לא כן ,היה נשאר מקום לפחות משני בלוקים וחגורה ) 35ס"מ( ולא פרקטי לביצוע{.
* לא מתוכנן ארגז תריס) .באם הייתה דרישה מיוחדת ,הייתי משאיר מקום לארגז ,ובאם יש צורך
מתכנן קורה/קורות עולות ויורדות.
r
15
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
RIB-A Code: IS466-03
Project: omar Page: 51
Designed by: Date: 2/10/24
Geometry Units:meter,cm
B-9 B-12
1
A
A
0.5 4.3 0.2
4.65
65.
5.
30.
15.
A A
Loading
load group no. 1
Dead load - Service Units:kN,meter
1.74
2.24
4.65
0.98
4.65
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Moments: spans 1o
-15.9 -16.6
14.8
16.6
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
RIB-A Code: IS466-03
Project: omar Page: 52
Designed by: Date: 2/10/24
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Reactions
Factored
R e i n f o r c e m e n t (cm 2)
Concrete: B30 Main reinforcement fsd = 435
Moment redistribution: No
Moment reduction: No Support moment at: Center
Top Cover 3.
As top =
Shear
Shear design: Links only
Links fsd = 435 Shear reduction: No Vrd,c/Ac=Yes
Exterior pinned supports - % of span As extended: Left = 30% Right = 30%
Links: Diameter: Min. = 8 Max. = 16 Spacing: Min. =5. Incr. = 5.
Legs: 2/2 Max no. of groups: 5 Max. =Code
Inverted T/L shear area: Web
Vrd,max/bd (=45)= 3.2 (MPa) 0.41
Vrd,c/bd 0.37 0.39
Vd/bd=
Asv/sv (cm2/meter)
prov. 5.
Links
8 Legs=2
Gap 5 5
22@20
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
RIB-A Code: IS466-03
Project: omar Page: 53
Designed by: Date: 2/10/24
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Moments: spans 1o Load pattern: xx
12.9
2.33 2.33
Shear
-10.6
9.9
-15.9
14.8
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
RIB-B Code: IS466-03
Project: omar Page: 54
Designed by: Date: 2/10/24
Geometry Units:meter,cm
BC-9 B-12
1 2
A A
A A
0.3 0.5 4.3 0.2
0.55 4.65
65.
5.
30.
15.
A A
Loading
load group no. 1
Dead load - Service Units:kN,meter
1.74 1.74
2.24 2.24
0.55 4.65
0.98 0.98
0.55 4.65
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Moments: spans 1o
-1.1
0.12
-15.8 -16.5
-4.
-2.2
15.1
16.8
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
RIB-B Code: IS466-03
Project: omar Page: 55
Designed by: Date: 2/10/24
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Reactions
Factored
R e i n f o r c e m e n t (cm 2)
Concrete: B30 Main reinforcement fsd = 435
Moment redistribution: No
Moment reduction: No Support moment at: Center
Top Cover 3. 3.
As top = 0.85*
Shear
Shear design: Links only
Links fsd = 435 Shear reduction: No Vrd,c/Ac=Yes
Exterior pinned supports - % of span As extended: Left = 30% Right = 30%
Links: Diameter: Min. = 8 Max. = 16 Spacing: Min. =5. Incr. = 5.
Legs: 2/2 Max no. of groups: 5 Max. =Code
Inverted T/L shear area: Web
Vrd,max/bd (0.41
=45)= 3.2 (MPa) 0.41
Vrd,c/bd 0.37 0.39
0.05
Vd/bd=
As/bd 0.00% 0.21% 0.21% 0.13%
Asv/sv (cm2/meter)
prov. 5. 5.
Links
8 Legs=2 8 Legs=2
Gap 5 5 5 5
2@20 22@20
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
RIB-B Code: IS466-03
Project: omar Page: 56
Designed by: Date: 2/10/24
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Moments: spans 1o Load pattern: XXXX
-1.1
Shear
-15.6
-2.2
15.1
-15.8
-1.3
15.
-1.1
10.2
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Shear
-8.6
-2.2
8.5
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
RIB-C Code: IS466-03
Project: omar Page: 58
Designed by: Date: 2/10/24
Geometry Units:meter,cm
B-6 BC-8
1 2
A A
A A
0.2 3.7 0.5 0.3
4.05 0.55
65.
5.
30.
15.
A A
Loading
load group no. 1
Dead load - Service Units:kN,meter
1.74 1.74
2.24 2.24
4.05 0.55
0.98 0.98
4.05 0.55
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Moments: spans 1o
-1.1
0.14 0.5
0.48
2.2
4.
13.6
14.3
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
RIB-C Code: IS466-03
Project: omar Page: 59
Designed by: Date: 2/10/24
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Reactions
Factored
R e i n f o r c e m e n t (cm 2)
Concrete: B30 Main reinforcement fsd = 435
Moment redistribution: No
Moment reduction: No Support moment at: Center
Top Cover 3. 3.
As top = 0.85*
Shear
Shear design: Links only
Links fsd = 435 Shear reduction: No Vrd,c/Ac=Yes
Exterior pinned supports - % of span As extended: Left = 30% Right = 30%
Links: Diameter: Min. = 8 Max. = 16 Spacing: Min. =5. Incr. = 5.
Legs: 2/2 Max no. of groups: 5 Max. =Code
Inverted T/L shear area: Web
Vrd,max/bd (0.41
=45)= 3.2 (MPa) 0.41
Vrd,c/bd 0.34
Vd/bd= 0.32
0.05
Asv/sv (cm2/meter)
prov. 5. 5.
Links
8 Legs=2 8 Legs=2
Gap 5 5 5 5
19@20 2@20
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
RIB-C Code: IS466-03
Project: omar Page: 60
Designed by: Date: 2/10/24
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Moments: spans 1o Load pattern: XXXX
-1.1
Shear
-12.9
2.2
13.5
-1.1
7.6
-7.3
2.2
7.4
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Shear
-12.8
1.3
13.6
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
RIB-D Code: IS466-03
Project: omar Page: 62
Designed by: Date: 2/10/24
Geometry Units:meter,cm
A A A
0.2 3.85 0.2 2.9 0.2 4.45 0.2
4.05 3.1 4.65
65.
5.
30.
15.
A A
Loading
load group no. 1
Dead load - Service Units:kN,meter
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Moments: spans 1o
-13.8
-10.
0.74 0.88
10.8
1.82 2.23 1.39 1.7 2.79 13.6 1.86
Shear
-16.2 -16.9
-13.5 -13.3 -14.
-12.8
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Reactions
Factored
R e i n f o r c e m e n t (cm 2)
Concrete: B30 Main reinforcement fsd = 435
Moment redistribution: No
Moment reduction: No Support moment at: Center
Top Cover 3. 3. 3.
As top = 0.89 0.39 1.23
*=minimum
Shear
Shear design: Links only
Links fsd = 435 Shear reduction: No Vrd,c/Ac=Yes
Exterior pinned supports - % of span As extended: Left = 30% Right = 30%
Links: Diameter: Min. = 8 Max. = 16 Spacing: Min. =5. Incr. = 5.
Legs: 2/2 Max no. of groups: 5 Max. =Code
Inverted T/L shear area: Web
Vrd,max/bd (=45)= 3.2 (MPa) 0.47
0.41 0.4 0.41 0.42 0.42 0.41
Vrd,c/bd 0.33
0.29 0.32
Vd/bd= 0.26
Asv/sv (cm2/meter)
prov. 5. 5. 5.
Links
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Moments: spans 1o Load pattern: XXxxXX
-12.2
-8.1
10.8
1.82 2.23 1.24 1.86 2.79 13.6 1.86
Shear
-15.8
-13.3
-8.3
5.6
11.7
18.5
-6.3
6.9
13.
1.62 2.43 1.24 1.86 2.79 1.86
Shear
-12.8 -12.9
-10.7
7.6 7.9
18.8
-10. -9.2
10. 8.7
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Shear
-16.2
-10.1 -8.7
-9.7
-7.2
0.2
6.5
8.5
Shear
-11. -11.2
-8.5
7.4
9.5
12.7
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
RIB-E Code: IS466-03
Project: omar Page: 66
Designed by: Date: 2/10/24
Geometry Units:meter,cm
A A A
0.2 3.7 0.5 2.6 0.5 1.8 0.2
4.05 3.1 2.15
65.
5.
30.
15.
A A
Loading
load group no. 1
Dead load - Service Units:kN,meter
1.74 1.74 1.74
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Moments: spans 1o
-11.4
-4.3
0.88 1.75 0.72
0.62
0.72 0.9 0.26
0.42
2.6 3.2
9.9
1.62 2.43 1.71 1.39 1.18 0.97
Shear
-17.3
-15.5
-9.8
-8. -6.7
-6.
7.9
11.2 12. 9.7
11.9
13.8
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
RIB-E Code: IS466-03
Project: omar Page: 67
Designed by: Date: 2/10/24
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Reactions
Factored
R e i n f o r c e m e n t (cm 2)
Concrete: B30 Main reinforcement fsd = 435
Moment redistribution: No
Moment reduction: No Support moment at: Center
Top Cover 3. 3. 3.
As top = 1.02 0.85*
Shear
Shear design: Links only
Links fsd = 435 Shear reduction: No Vrd,c/Ac=Yes
Exterior pinned supports - % of span As extended: Left = 30% Right = 30%
Links: Diameter: Min. = 8 Max. = 16 Spacing: Min. =5. Incr. = 5.
Legs: 2/2 Max no. of groups: 5 Max. =Code
Inverted T/L shear area: Web
Vrd,max/bd (0.41
=45)= 3.2 (MPa)
Vrd,c/bd 0.38 0.41 0.41
0.28 0.3
Vd/bd=
0.2 0.19
0.15
Asv/sv (cm2/meter)
prov. 5. 5. 5.
Links
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Moments: spans 1o Load pattern: XXxxXX
-10.3
-2.
0.3
3.2
9.9
1.62 2.43 2.17 0.93 1.18 0.97
Shear
-15.2
-6.
-3.5
6.8
8.9
11.2
-8.3
-4.3
2.4 2.3
6.1
-10.5
-8.
-5.
7.1 7.9
10.6
-2.8
2. 1.5
9.5
1.62 2.43 1.86 1.24 1.4 0.75
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
RIB-E Code: IS466-03
Project: omar Page: 69
Designed by: Date: 2/10/24
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Shear
-15.5
-6.5
-3.3
5.3
10.9 12.
-8.5
-3.7
1.2
2.6
6.
Shear
-10.6
-7.7
-2.9
7.1 5.7
10.8
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
RIB-F Code: IS466-03
Project: omar Page: 70
Designed by: Date: 2/10/24
Geometry Units:meter,cm
B-6 B-7
1
A
A
0.5 3.55 0.5
4.05
65.
5.
30.
15.
A A
Loading
load group no. 1
Dead load - Service Units:kN,meter
1.74
2.24
4.05
0.98
4.05
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Moments: spans 1o
12.7
14.5
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
RIB-F Code: IS466-03
Project: omar Page: 71
Designed by: Date: 2/10/24
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Reactions
Factored
R e i n f o r c e m e n t (cm 2)
Concrete: B30 Main reinforcement fsd = 435
Moment redistribution: No
Moment reduction: No Support moment at: Center
Top Cover 3.
As top =
*=minimum
Shear
Shear design: Links only
Links fsd = 435 Shear reduction: No Vrd,c/Ac=Yes
Exterior pinned supports - % of span As extended: Left = 30% Right = 30%
Links: Diameter: Min. = 8 Max. = 16 Spacing: Min. =5. Incr. = 5.
Legs: 2/2 Max no. of groups: 5 Max. =Code
Inverted T/L shear area: Web
Vrd,max/bd (0.41
=45)= 3.2 (MPa)
Vrd,c/bd
Vd/bd= 0.31 0.31
Asv/sv (cm2/meter)
prov. 5.
Links
8 Legs=2
Gap 7.5 7.5
18@20
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
RIB-F Code: IS466-03
Project: omar Page: 72
Designed by: Date: 2/10/24
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Moments: spans 1o Load pattern: xx
9.8
2.03 2.03
Shear
-8.5
8.5
-12.7
12.7
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
Bs-8+B-7 Code: IS466-03
Project: omar Page: 135
Designed by: Date: 2/18/24
Geometry Units:meter,cm
16 12 7 2
1 2 3
B A A
B A A
Loading
load group no. 1
Dead load - Service Units:kN,meter
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Moments: spans 1o
-74.7
-61.3
26.2
33.5
93.6 97.9
98.8 107.4
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
Bs-8+B-7 Code: IS466-03
Project: omar Page: 136
Designed by: Date: 2/18/24
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Reactions
Factored
R e i n f o r c e m e n t (cm 2)
Concrete: B30 Main reinforcement fsd = 435
Moment redistribution: No
Moment reduction: No Support moment at: Center
Top Cover 3. 3. 3.
As top = 0.28 5.60 6.95
*=minimum
2.92 4.51 1.35
3. 3.
As bot = 0.97 3.25*
Bot Cover 3.
x/d 0% 10% 14% 10% 17% 11% 0%
As/Ac 0.00% 0.21% 0.36% 0.22% 0.52% 0.33% 0.00%
Shear
Shear design: Links only
Links fsd = 435 Shear reduction: No Vrd,c/Ac=Yes
Exterior pinned supports - % of span As extended: Left = 30% Right = 30%
Links: Diameter: Min. = 8 Max. = 16 Spacing: Min. =5. Incr. = 5.
Legs: 2/2 Max no. of groups: 5 Max. =Code
Vrd,max/bd (=45)= 3.2 (MPa)
0.69 0.67 0.73
0.43 0.46 0.5 0.5 0.41
0.36 0.38
Vrd,c/bd 0.3
Vd/bd= 0.17
Asv/sv (cm2/meter)
10. 10.
prov. 3.33 5. 5. 5. 5.
req'd 2. 2.
Angle 26.6 26.6 26.6 26.6 26.6 26.6
Vrd,max= 2.6 2.6 2.6 2.6 2.6 2.6
Asv/s,min= 2. 5. 5.
Links
8 Legs=4 8 Legs=4
Gap 8 Legs=2 5 5 10 10
Gap 5 5 18@20 18@20
8@30
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
Bs-8+B-7 Code: IS466-03
Project: omar Page: 137
Designed by: Date: 2/18/24
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Moments: spans 1o Load pattern: XXxxXX
-66.3
-30.8
15.3 16.7
50.
0.88 1.62 1.71 2.09 2.2 1.8
Shear
-67.6
-54.5 -51.7
26.2
55.2
95.8
2.9
28.8
46.6
-90.9
-52.7 -49.6
7.2
87.4 97.9
-61.3 -58.9
6.2
32.5 28.5
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Shear
-84.7
-66.7
-32.1
14.
67.9
93.6
-60.9 -59.
1.7
32.7 28.5
Shear
-84.8
-55.7
-32.1
4.3
67.9
93.4
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
BS-9+B10 Code: IS466-03
Project: omar Page: 139
Designed by: Date: 2/18/24
Geometry Units:meter,cm
13 8 3 4
1 2 3
A A B
A A B
0.2 3.5 0.4 3.6 0.2 0.8 0.2
3.8 3.9 1.
20.
30.
50. 80.
A A 30.
50.
B B
** The following spans are `deep beams`: 3
Loading
load group no. 1
Dead load - Service Units:kN,meter
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Moments: spans 1o
-67.4
-57.1
1.06 1.07
0.87
0.74 0.7
0.75
32.6
40.8
49.5 42.4
52.9
77.1 73.1
91.3
102.1
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
BS-9+B10 Code: IS466-03
Project: omar Page: 140
Designed by: Date: 2/18/24
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Reactions
Factored
R e i n f o r c e m e n t (cm 2)
Concrete: B30 Main reinforcement fsd = 435
Moment redistribution: No
Moment reduction: No Support moment at: Center
Top Cover 3. 3. 3.
As top = 6.21 5.19 3.25
*=minimum 1.09
3.65 2.92
3. 3.
As bot = 3.25* 0.97
Bot Cover 3.
x/d 0% 10% 15% 10% 13% 10% 0%
As/Ac 0.00% 0.27% 0.46% 0.22% 0.34% 0.21% 0.00%
Shear
Shear design: Links only
Links fsd = 435 Shear reduction: No Vrd,c/Ac=Yes
Exterior pinned supports - % of span As extended: Left = 30% Right = 30%
Links: Diameter: Min. = 8 Max. = 16 Spacing: Min. =5. Incr. = 5.
Legs: 2/2 Max no. of groups: 5 Max. =Code
Vrd,max/bd (=45)= 3.2 (MPa) 0.67 0.68
0.58
0.41 0.48 0.48 0.45 0.47
Vrd,c/bd 0.37 0.35 0.3
Vd/bd= 0.28
Asv/sv (cm2/meter)
req'd 5. 5. 5. 5. 3.33
2. 2.
Angle 26.6 26.6 26.6 26.6 26.6 26.6
Vrd,max= 2.6 2.6 2.6 2.6 2.6 2.6
Asv/s,min= 5. 5. 2.
Links
8 Legs=4 8 Legs=4
Gap 5 5 10 10 8 Legs=2
Gap 18@20 18@20 10 10
3@30
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
BS-9+B10 Code: IS466-03
Project: omar Page: 141
Designed by: Date: 2/18/24
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Moments: spans 1o Load pattern: XXxxXX
-58.8
-29.2
16.6
40.8
Shear
-88.6
-46.2
9.2
49.5 45.2
67.5
-54.4 -57.1
21.5
32.6
-78.2
-63.8
29.1 37.2
73.1
86.3
28.6
37.3
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Shear
-90.8
-73.2
36.
47.2
62.5
91.3
-54.4 -57.1
21.5
32.6
Shear
-78.2
-63.8
29.1
42.4
68.9
86.3
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
B-1 Code: IS466-03
Project: omar Page: 143
Designed by: Date: 2/18/24
Geometry Units:meter,cm
4 5
1
A
A
0.4 4.2 0.4
4.6
80.
20.
A A
Loading
load group no. 1
Dead load - Service Units:kN,meter
2.00
4.05
4.00
4.6
0.50
4.6
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Moments: spans 1o
31.2
34.2
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
B-1 Code: IS466-03
Project: omar Page: 144
Designed by: Date: 2/18/24
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Reactions
Factored
R e i n f o r c e m e n t (cm 2)
Concrete: B30 Main reinforcement fsd = 435
Moment redistribution: No
Moment reduction: No Support moment at: Center
Top Cover 3.
As top =
Shear
Shear design: Links only
Links fsd = 435 Shear reduction: No Vrd,c/Ac=Yes
Exterior pinned supports - % of span As extended: Left = 30% Right = 30%
Links: Diameter: Min. = 8 Max. = 16 Spacing: Min. =5. Incr. = 5.
Legs: 2/2 Max no. of groups: 5 Max. =Code
Vrd,max/bd (0.3
=45)= 3.2 (MPa)
Vrd,c/bd
Vd/bd= 0.2 0.2
Asv/sv (cm2/meter)
prov. 3.33
req'd 2. 2.
Links
8 Legs=2
Gap 15 15
14@30
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
B-1 Code: IS466-03
Project: omar Page: 145
Designed by: Date: 2/18/24
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Moments: spans 1o Load pattern: xx
31.9
2.3 2.3
Shear
-25.3
25.3
-31.2
31.2
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
B-2 Code: IS466-03
Project: omar Page: 146
Designed by: Date: 2/18/24
Geometry Units:meter,cm
1 2 3
1 2
A A
A A
0.4 3.6 0.4 2.4 0.4
4. 2.8
80.
20.
A A
Loading
load group no. 1
Dead load - Service Units:kN,meter
2.00 2.00
4.05 4.05
4.00 4.00
4. 2.8
0.50 0.50
4. 2.8
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Moments: spans 1o
-23.5
0.84 1.33
0.75 0.97
6.2
19.6
1.6 2.4 1.82 0.98
Shear
-35.6
-32.6
-13.6
-10.6
21.2
24.1 26.2
29.2
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
B-2 Code: IS466-03
Project: omar Page: 147
Designed by: Date: 2/18/24
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Reactions
Factored
R e i n f o r c e m e n t (cm 2)
Concrete: B30 Main reinforcement fsd = 435
Moment redistribution: No
Moment reduction: No Support moment at: Center
Top Cover 3. 3.
As top = 2.00*
*=minimum
Shear
Shear design: Links only
Links fsd = 435 Shear reduction: No Vrd,c/Ac=Yes
Exterior pinned supports - % of span As extended: Left = 30% Right = 30%
Links: Diameter: Min. = 8 Max. = 16 Spacing: Min. =5. Incr. = 5.
Legs: 2/2 Max no. of groups: 5 Max. =Code
Vrd,max/bd (0.3
=45)= 3.2 (MPa) 0.3
Vrd,c/bd
0.21
0.17
Vd/bd= 0.14
0.07
Asv/sv (cm2/meter)
req'd 2. 2. 2. 2.
Links
8 Legs=2 8 Legs=2
Gap 15 15 15 15
12@30 8@30
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
B-2 Code: IS466-03
Project: omar Page: 148
Designed by: Date: 2/18/24
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Moments: spans 1o Load pattern: XXXX
-23.5
5.2
19.2
1.6 2.4 1.96 0.84
Shear
-32.6
-9.5
20.9
26.2
6.2
15.1
-26.8
-10.6
16.7
25.1
3.3
19.6
1.6 2.4 2.1 0.7
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
B-2 Code: IS466-03
Project: omar Page: 149
Designed by: Date: 2/18/24
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Shear
-32.4
-6.5
21.2 22.5
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
B-3 Code: IS466-03
Project: omar Page: 150
Designed by: Date: 2/18/24
Geometry Units:meter,cm
9 10
1
A
A
0.4 1.9 0.4
2.3
80.
20.
A A
Loading
load group no. 1
Dead load - Service Units:kN,meter
2.00
4.05
4.00
2.3
0.50
2.3
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Moments: spans 1o
14.1
17.1
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
B-3 Code: IS466-03
Project: omar Page: 151
Designed by: Date: 2/18/24
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Reactions
Factored
R e i n f o r c e m e n t (cm 2)
Concrete: B30 Main reinforcement fsd = 435
Moment redistribution: No
Moment reduction: No Support moment at: Center
Top Cover 3.
As top =
Shear
Shear design: Links only
Links fsd = 435 Shear reduction: No Vrd,c/Ac=Yes
Exterior pinned supports - % of span As extended: Left = 30% Right = 30%
Links: Diameter: Min. = 8 Max. = 16 Spacing: Min. =5. Incr. = 5.
Legs: 2/2 Max no. of groups: 5 Max. =Code
Vrd,max/bd (0.3
=45)= 3.2 (MPa)
Vrd,c/bd
Asv/sv (cm2/meter)
prov. 3.33
req'd 2. 2.
Links
8 Legs=2
Gap 5 5
7@30
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
B-3 Code: IS466-03
Project: omar Page: 152
Designed by: Date: 2/18/24
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Moments: spans 1o Load pattern: xx
8.
1.15 1.15
Shear
-11.5
11.5
-14.1
14.1
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
B-4 Code: IS466-03
Project: omar Page: 153
Designed by: Date: 2/18/24
Geometry Units:meter,cm
12 13 14
1 2
A A
A A
0.4 2.2 0.4 1.9 0.4
2.6 2.3
80.
20.
A A
Loading
load group no. 1
Dead load - Service Units:kN,meter
2.00 2.00
4.05 4.05
4.00 4.00
2.6 2.3
0.50 0.50
2.6 2.3
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Moments: spans 1o
-11.3
0.64 0.75
0.54 0.59
5.4
7.9
1.04 1.56 1.5 0.8
Shear
-23.7
-20.7
-12.7
-9.8
12.4
15.3
19.
22.
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
B-4 Code: IS466-03
Project: omar Page: 154
Designed by: Date: 2/18/24
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Reactions
Factored
R e i n f o r c e m e n t (cm 2)
Concrete: B30 Main reinforcement fsd = 435
Moment redistribution: No
Moment reduction: No Support moment at: Center
Top Cover 3. 3.
As top = 2.00*
Shear
Shear design: Links only
Links fsd = 435 Shear reduction: No Vrd,c/Ac=Yes
Exterior pinned supports - % of span As extended: Left = 30% Right = 30%
Links: Diameter: Min. = 8 Max. = 16 Spacing: Min. =5. Incr. = 5.
Legs: 2/2 Max no. of groups: 5 Max. =Code
Vrd,max/bd (0.3
=45)= 3.2 (MPa) 0.3
Vrd,c/bd
0.13 0.12
Vd/bd= 0.08 0.06
Asv/sv (cm2/meter)
req'd 2. 2. 2. 2.
Links
8 Legs=2 8 Legs=2
Gap 5 5 5 5
8@30 7@30
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
B-4 Code: IS466-03
Project: omar Page: 155
Designed by: Date: 2/18/24
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Moments: spans 1o Load pattern: XXXX
-11.3
5.
7.5
1.04 1.56 1.5 0.8
Shear
-20.7
-9.2
12.
19.
5.8 5.4
-17.1
-9.8
9.4
18.5
3.6
7.9
1.04 1.56 1.5 0.8
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
B-4 Code: IS466-03
Project: omar Page: 156
Designed by: Date: 2/18/24
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Shear
-20.4
-6.9
12.4
16.
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
B-5 Code: IS466-03
Project: omar Page: 157
Designed by: Date: 2/18/24
Geometry Units:meter,cm
15 16
1
A
A
0.2 4. 0.2
4.2
80.
20.
A A
Loading
load group no. 1
Dead load - Service Units:kN,meter
2.00
4.05
4.00
4.2
0.50
4.2
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Moments: spans 1o
29.7
31.2
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
B-5 Code: IS466-03
Project: omar Page: 158
Designed by: Date: 2/18/24
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Reactions
Factored
R e i n f o r c e m e n t (cm 2)
Concrete: B30 Main reinforcement fsd = 435
Moment redistribution: No
Moment reduction: No Support moment at: Center
Top Cover 3.
As top =
*=minimum
Shear
Shear design: Links only
Links fsd = 435 Shear reduction: No Vrd,c/Ac=Yes
Exterior pinned supports - % of span As extended: Left = 30% Right = 30%
Links: Diameter: Min. = 8 Max. = 16 Spacing: Min. =5. Incr. = 5.
Legs: 2/2 Max no. of groups: 5 Max. =Code
Vrd,max/bd (0.3
=45)= 3.2 (MPa)
Vrd,c/bd
Vd/bd= 0.19 0.19
Asv/sv (cm2/meter)
prov. 3.33
req'd 2. 2.
Links
8 Legs=2
Gap 5 5
14@30
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
B-5 Code: IS466-03
Project: omar Page: 159
Designed by: Date: 2/18/24
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Moments: spans 1o Load pattern: xx
26.6
2.1 2.1
Shear
-24.1
24.1
-29.7
29.7
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
B-6 Code: IS466-03
Project: omar Page: 131
Designed by: Date: 2/18/24
Geometry Units:meter,cm
15 11 6 1
1 2 3
A A A
A A A
0.4 2.9 0.4 2.6 0.4 3.6 0.4
3.3 3. 4.
80.
20.
A A
Loading
load group no. 1
Dead load - Service Units:kN,meter
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Moments: spans 1o
-45.6
-31.3
0.63 0.78
33.3
1.49 1.81 1.35 1.65 2.4 44.8 1.6
Shear
-62.2
-56.3 -52.7 -54.5
-46.6 -47.9
40.6 37.5
47.3 43.4
67.3
73.4
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
B-6 Code: IS466-03
Project: omar Page: 132
Designed by: Date: 2/18/24
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Reactions
Factored
R e i n f o r c e m e n t (cm 2)
Concrete: B30 Main reinforcement fsd = 435
Moment redistribution: No
Moment reduction: No Support moment at: Center
Top Cover 3. 3. 3.
As top = 2.00* 0.27 2.00*
*=minimum
Shear
Shear design: Links only
Links fsd = 435 Shear reduction: No Vrd,c/Ac=Yes
Exterior pinned supports - % of span As extended: Left = 30% Right = 30%
Links: Diameter: Min. = 8 Max. = 16 Spacing: Min. =5. Incr. = 5.
Legs: 2/2 Max no. of groups: 5 Max. =Code
Vrd,max/bd (=45)= 3.2 (MPa) 0.44
0.3 0.37
Vrd,c/bd 0.3 0.3 0.3 0.31
Vd/bd= 0.26 0.24
Asv/sv (cm2/meter)
req'd 2. 2. 2. 2. 2. 2.
Links
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Moments: spans 1o Load pattern: XXxxXX
-41.1
-25.4
33.3
1.49 1.81 1.2 1.8 2.4 44.8 1.6
Shear
-54.6 -47.9
-33.8
23.
40.6
66.2
-22.2
0.4
22.9
43.
1.32 1.98 1.2 1.8 2.4 1.6
Shear
28.6 30.7
67.3
-31.3 -34.
0.7
30.9 31.3
1.32 1.98 1.5 1.5 2.4 1.6
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
B-6 Code: IS466-03
Project: omar Page: 134
Designed by: Date: 2/18/24
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Shear
-56.3
-39.7 -34.1
38.8 37.5
49.5
-35.4
-24.6
3.5
21.9
30.7
1.32 1.98 1.35 1.65 2.4 1.6
Shear
-41.8 -42.4
-33.8
27.9 34.8
49.9
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
B-11 Code: IS466-03
Project: omar Page: 111
Designed by: Date: 2/18/24
Geometry Units:meter,cm
14 9
1
A
A
0.2 2.5 0.2
2.7
80.
20.
A A
Loading
load group no. 1
Dead load - Service Units:kN,meter
4.05
5.21
4.00
2.7
1.71
2.7
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Moments: spans 1o
26.6
28.8
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
B-11 Code: IS466-03
Project: omar Page: 112
Designed by: Date: 2/18/24
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Reactions
Factored
R e i n f o r c e m e n t (cm 2)
Concrete: B30 Main reinforcement fsd = 435
Moment redistribution: No
Moment reduction: No Support moment at: Center
Top Cover 3.
As top =
*=minimum
Shear
Shear design: Links only
Links fsd = 435 Shear reduction: No Vrd,c/Ac=Yes
Exterior pinned supports - % of span As extended: Left = 30% Right = 30%
Links: Diameter: Min. = 8 Max. = 16 Spacing: Min. =5. Incr. = 5.
Legs: 2/2 Max no. of groups: 5 Max. =Code
Vrd,max/bd (0.3
=45)= 3.2 (MPa)
Vrd,c/bd
Asv/sv (cm2/meter)
prov. 3.33
req'd 2. 2.
Links
8 Legs=2
Gap 5 5
9@30
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
B-11 Code: IS466-03
Project: omar Page: 113
Designed by: Date: 2/18/24
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Moments: spans 1o Load pattern: xx
14.5
1.35 1.35
Shear
-19.9
19.9
-26.6
26.6
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
B-12 Code: IS466-03
Project: omar Page: 114
Designed by: Date: 2/18/24
Geometry Units:meter,cm
15 16
1
A
A
0.2 5.8 0.2
6.
80.
20.
A A
Loading
load group no. 1
Dead load - Service Units:kN,meter
4.05
4.00
3.1 2. 0.9
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Moments: spans 1o
3. 155. 3.
Shear
-102.9 -106.6
100.6 97.4
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
B-12 Code: IS466-03
Project: omar Page: 115
Designed by: Date: 2/18/24
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Reactions
Factored
R e i n f o r c e m e n t (cm 2)
Concrete: B30 Main reinforcement fsd = 435
Moment redistribution: No
Moment reduction: No Support moment at: Center
Top Cover 3.
As top =
*=minimum
Shear
Shear design: Links only
Links fsd = 435 Shear reduction: No Vrd,c/Ac=Yes
Exterior pinned supports - % of span As extended: Left = 30% Right = 30%
Links: Diameter: Min. = 8 Max. = 16 Spacing: Min. =5. Incr. = 5.
Legs: 2/2 Max no. of groups: 5 Max. =Code
Vrd,max/bd (=45)= 3.2 (MPa) 0.67
Vd/bd= 0.63
Vrd,c/bd 0.3
Asv/sv (cm2/meter)
prov. 3.33
req'd 2. 2.
Links
8 Legs=2
Gap 5 5
20@30
*** ATIR ENGINEERING SOFTWARE DEVELOPMENT ***
*** FOR EDUCATIONAL PURPOSES ONLY ***
B-12 Code: IS466-03
Project: omar Page: 116
Designed by: Date: 2/18/24
M o m e n t / S h e a r E n v e l o p e (Factored) Units:kN,meter
Moments: spans 1o Load pattern: xx
112.8
3. 3.
Shear
-74.8
70.9
3. 155. 3.
Shear
-102.9
97.4