Effluent lifting pumps: Centrifugal type, non clog self priming
pumps complete with suction and delivery valves and non return valves,suction and delivery headers of an approved make of capable of handling minimum 25 to 32mm solids size for untreated effluent with fan cooled induction motor with class 'B' insulation, mounted on a common structural base plate, suitable vibration eliminated pads of approved design for pump foundation, motor to be suitable for 400/440 volts, 3 phase, 50 cycles AC supply with rpm, to suit the corresponding pumps.
Capacity 1.5 m3/hr at 10m head (For effluent lifting from equilisation tank). Each 2
Centrifuge Feed Pumps: Centrifugal type, non clog self priming
pumps complete with valves, suction and delivery header of an approved make of suitable capacity capable of handling 8-10 mm size solids for untreated effluent mounted on a base plate, suitable vibration eliminated pads of approved design for pump foundation, motor to be suitable for 400/440 volts, 3 phase, 50 cycles AC supply with rpm, to suit the corresponding pumps.
Capacity 1.0 m3/hr at 15m head Each 1
Submersible drainage pumps: Providing, fixing and commissioning
non clog type stainless Steel mono block submersible drainage pumps suitable for handling solids of 12 mm size with totally water and dust proof motor.
Capacity 18.0m3/hr at 15m head (For drainage lifting from drainage
Each 2 sump)
Sewage pumps: Centrifugal type, non clog self priming pumps
complete with valves, suction and delivery header of an approved make of suitable capacity capable of handling minimum 7 mm to 10 mm size solids for untreated effluent with fan cooled induction motor with class 'B' insulation, mounted on a common structural base plate, suitable vibration eliminated pads of approved design for pump foundation, motor to be suitable for 400/440 volts, 3 phase, 50 cycles AC supply with rpm, to suit the corresponding pumps. Capacity 6.0m3/hr at 12m head (For sewage lifting from equalisation Each 2 sump) Sludge pumps: Centrifugal type, non clog self priming pumps complete with valves, suction and delivery header and priming tank of an approved make of suitable capacity capable of handling minimum 7mm to 10mm solids size for untreated effluent with fan cooled induction motor with class 'B' insulation, mounted on a common structural base plate, suitable vibration eliminated pads of approved design for pump foundation, motor to be suitable for 400/440 volts, 3 phase, 50 cycles AC supply with rpm, to suit the corresponding pumps.
Capacity 6.0m3/hr at 12m head (For transfer of sludge) Each 2
Capacity 2 m3/hr at 12m head (For transfer of sludge) each 2 Capacity 20.0m /hr at 10m head (For recirculation of sludge from 3 Each 2 FAB-2 tank to Anoxic Tank)
Filter press feed screw pumps of an approved makes complete
with suction and delivery valves and non return valves,suction pipes and delivery pipes headers capable of handling sludge complete with motor & mounted on structrural base plate with pressure guage with isolation cable.
Capacity 1.0m3/hr at 40m head. Each 2
Filter Feed pumps/Softner feed pumps/Soft water transfer
pumps : Centrifugal type, monoblock, pumps with bronze in impeller of an approved make and complete with valves, suction and delivery headers capable of handling clear water complete with fan cooled induction motor with class B insulation, mounted on a common structural base plate with 100mm dia pressure gauge with gunmetal isolation cock and suitable vibration elimination pads of approved design for pump foundation. Motor to be suitable for 400/440 volts, 3 phase, 50 cycle AC supply with rpm, to suit the corresponding pumps.
Capacity 12.0m3/hr at 25m head.(Filter feed pumps) Each 2
Capacity 9.0m3/hr at 25m head.(Softner feed pumps) Each 2 Capacity 9.0m3/hr at 30m head.(Soft water transfer pumps) Each 2
UF Feed Pump 2 Nos. (1W+S) 8.0m3/hr each 25-30m head Each 2
UF Backwash pumps with Complete SS - 304 with motor, pressure
gauge with isolation cock, Isolation valve, NRV on delivery line. Isolation valve, strainer at suction etc. (Cap. 16m3/hr head 30-40m (1 W+ 1S) Including HDPE back tank of capacity 500 litres. Each 2 Softner feed pumps / Soft water transfer pumps : Centrifugal type, monoblock, pumps with bronze in impeller of an approved make and complete with valves, suction and delivery headers capable of handling clear water complete with fan cooled induction motor with class B insulation, mounted on a common structural base plate with 100mm dia pressure gauge with gunmetal isolation cock and suitable vibration elimination pads of approved design for pump foundation. Motor to be suitable for 400/440 volts, 3 phase, 50 cycle AC supply with rpm, to suit the corresponding pumps.
Capacity 18.0m3/hr at 25m head.(Softner feed pumps) Each 2
Capacity 18.0m3/hr at 45m head.(Soft water transfer pumps) Each 2
Raw water feed pump 18000 LPH @ 2.5-3.0 kg/cm2 each 2
Filter Feed pumps/Softner feed pumps/Soft water transfer
pumps : Centrifugal type, monoblock, pumps with bronze in impeller of an approved make and complete with valves, suction and delivery headers capable of handling clear water complete with fan cooled induction motor with class B insulation, mounted on a common structural base plate with 100mm dia pressure gauge with gunmetal isolation cock and suitable vibration elimination pads of approved design for pump foundation. Motor to be suitable for 400/440 volts, 3 phase, 50 cycle AC supply with rpm, to suit the corresponding pumps.
Capacity 12.0m3/hr at 25m head.(Filter feed pumps) Each 2
Capacity 9.0m3/hr at 25m head.(Softner feed pumps) Each 2 Capacity 9.0m3/hr at 30m head.(Soft water transfer pumps) Each 2