This bill of quantity is for the procurement of 60 water spray nozzles from HD Fire in India. The cone nozzle model MV-A is made of brass with a 1/2 inch male NPT inlet and K-30 factor. It has a working pressure of 12 bar, spray angle of 65 degrees, and will be used for jetty and LNG areas. The document was prepared by Defby and reviewed by another party.
This bill of quantity is for the procurement of 60 water spray nozzles from HD Fire in India. The cone nozzle model MV-A is made of brass with a 1/2 inch male NPT inlet and K-30 factor. It has a working pressure of 12 bar, spray angle of 65 degrees, and will be used for jetty and LNG areas. The document was prepared by Defby and reviewed by another party.
This bill of quantity is for the procurement of 60 water spray nozzles from HD Fire in India. The cone nozzle model MV-A is made of brass with a 1/2 inch male NPT inlet and K-30 factor. It has a working pressure of 12 bar, spray angle of 65 degrees, and will be used for jetty and LNG areas. The document was prepared by Defby and reviewed by another party.
1 Water Spray Nozzle - Cone Nozzle 60 ea - For Jetty -2 area 40
Model is MV-A - For New LNG area 20 Material Construction is Brass Max. Working Press. at 12 Bar Recommend Working Pressure Range 1.4 to 4.1 Bar Inlet Connection is 1/2inch Male NPT K-Factor size is K-30 Spray Angle is 65 Deg Material Finish is Natural Brass Approval is UL Listed & FM Approved Mfr : HD Fire - India